Latest review: Bought Arlec fan from Bunnings last year summer for 90 dollars . Now the weather is warming up and I thought to put the fan on but after few minutes it is dead ! Waste of money, I will never
Latest review: Read the notice in the manual that it might oscillate audibly "momentarily" before starting. However it would oscillate for as long as I'd watch it for in the roof. It would only start if I flicked
Latest review: The 4 blade ceiling fan is excellent value. Featuring new-look fan brackets and blades, efficient design, it does not look out of place in any setting and will provide years of solid, reliable
Latest review: A great addition if you only have a single light fitting in the room to deal with. You can connect it to your existing wiring an presto, you have a combination bright light and a quiet DC motor
Latest review: I bought my first Arlec 45cm, 5 blader fan from Bunnings at end of 2018, and on first switch on, was amazed at its airflow capacity even on low speed. The only downside if one can call it that is
Latest review: 2 x units in undamaged cartons bought from Bunnings 23/05/2020.
Unit 1 run for about 12 hours across 2 days.
Early morning of 25/05/2020, 10yo daughter complains that the heater is spewing "smelly
Latest review: I bought this pedestal fan on Arlecs previous electronics reputation. IMHO this is a disgrace.
1. It consumes only 30 watts of electricity p.h. but it is so underpowered. Even on its top fan
Latest review: I only have it for a month, so I don't know whether it will last for more than 14 months or not. Shall update this next year if the fan still run. Ha
Found this one in Bunnings, although the fan
Latest review: I installed a heater for the same reason as James. Been installed for 3 weeks and upper surface has a burnt, brown look. Arlec has told me that warranty is void because electrician hard wired it
Latest review: Easy to install. Very noisy at start and was noisy during use. Circulated air well. Seized up after only 3 weeks of light use. Seller no help, advised contact Arlec. Arlec as useless as an ashtray on
Latest review: I bought this machine last spring and I have regretted it every day since.
I couldnt connect it. I had to pay someone to do it. The white panel was too short for my window, we had to use masking tape
Latest review: Same issues as all other reviews. Changes the set temperature down to 5 degrees, timer randomly turns on, fan randomly turns on/off, changes from F to C, need I go on.... Took it back on warranty but
Latest review: I purchased an arlec mef20 from Bunnings to replace an existing fan. On start up it made a noise like the blade was hitting the power cord. Took it back and swapped it same thing but worse. Swapped
Latest review: Fan speed very slow and very poor air flow, even on high speed setting. Had unit tested for fault. No apparent fault. Arlec not helpfull at all. Apparently this is a known issue, I have only just