Latest review: Smoother running, not as loud as other motor models and very very reliable. Its well-balanced efficiency from start off to full power on the water. Between 600-900 rpm. Still got two options if you
Latest review: My 25hp nmhs is on a Sea Jay Nomad 3.7, with bowmount motor and all safetygear etc. Very quick@28 knots (gps) with 11 1/4 pitch prop. Idles trolling smoothly with no plug fouling issue. Using 80:1
Latest review: Amazing, never let me down, heaps of power, easy starter, just feels right to drive, great fuel consumption minimal vibrations. Best engine I have ever owned, very light but packs plenty of power,
Latest review: I actually own the STX10 and STX40 but there was no STX series in the menu. I have flogged them hard without an issue. The first one was the little STX10 which I loaded with heavier line and worked
Latest review: I’ve swapped over a 3.3lt f250 for the new 4.2lt F300 and have to say, all-in-all I’m very happy with the change!
The benefits far outweigh any negatives, but I’ll start there.
Latest review: Excellent outboard, starts well hot or cold, I've owned two of them, one on a 20 ft rip tide plate boat giving around 22Lp/h at around 4000rpm, the other on an 18ft plate metal and marine giving a
Latest review: Without a doubt the best value rod on the market in my opinion and durable too. Own the spin model at the moment will be going back to get another baitcast rod for my abu revo do yourself a favour
Latest review: I've owned a 5500C4 for the last 10+ years and its had a fair amount of use, with trolling lures and casting from the banks for flathead and other larger estuarine fish.
The reel is built around a
Latest review: good brand and good reel, its a little small for me, dont buy it if you cant cast properly with these types of reels as they can be sensitive and you can loose alot of line. If you know how to
Latest review: When I retired I bought a Yamaha 15 hp motor from Watsons Trimming and Marine at Lismore, NSW. I then purchased a Stessl Edge Tracker 3.7 metre tinny and this was a perfect match. The motor bounced
Latest review: Great machine! Quiet and efficient. Strong and reliable. Works like a charm every time. Great machine! Quiet and efficient. Strong and reliable. Works like a charm every time. Great machine! Quiet
Latest review: I have 3 of these reels, (the oldest is well over 20 years old) and have found the Abu Garcia 6500c3 reel to be one of the toughest baitcasters around. The early reels were made in Sweden, my latest
Latest review: The bait casters may be ok but i got a Blackmax rod and reel in the spin versions. The reels line roller wouldn't budge so I returned it unused. Kept the rod. Today I was spooling up another reel on
Latest review: I bought one of there fishing reels thinking Abu Garcia was a absolutely good brand. For the first few months it worked pretty well, but after that it began to have problems locking the handle and
Latest review: Purchased this reel from Anaconda on sale. Down from $70 ($69.99) to $50 ($49.99). Looks nice and even though years ago I had an Abu spinning reel that had a horrible lumpy drag I thought that having
Latest review: Yamaha outboards were the best outboard offered years ago but this no longer applies. I have owned 6 yamahas and make my living running them. Corrosion in the exhaust is causing holes to develop in
Latest review: The f30b performs poorly on same vessel in comparisson to old 35 evenrude 2stroke. when purchasing i was led to believe that it would out perform it other wise I would have purchased the 40 as they
Latest review: Regular and timely service done with dealer.
Last month, one engine exploded with a bang from the top compartment. Next day the dealer examined it and found no reason whatsoever to explain why it