3 questions from our users
Where is the circuit breaker for the air con?
How does the gas hot water system work? not getting hot water
I have a problem with the inlet valve ,we cannot get water into the van only way we can get water is thru the pump and and holding tanks. We cannot go on mains as it doesn't go in .The hose connections are round the right way can't find any kinks under van or under bed only .I believe that the inlet valve is just on the inside under the cupboard , is the valve spring loaded? And should I be able to push it in
There is a shuttle valve under the bed - it will need to be taken apart and freed up - they get a tiny piece of dirt into them and jam the shuttle valve from moving freely to allow town water or van tanks to operate. Best to always have an inline (carbon) filter when utilizing town water as this seems to eliminate the problem.
We had the same problem. The filler pipe in the van was kinked up in a big loop. Avan had to cut the pipe shorter so water actually flowed down hill and not up.
We had the same problem. The filler pipe in the van was kinked up in a big loop. Avan had to cut the pipe shorter so water actually flowed down hill and not up.our preasure reducer valve blocked up aswell and i replaced it with a tap and bought a plastic one from bunnings that fits on the tap for about $10.
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.