Only for the mechanically minded..........
Bought one a while ago after reading blogs, and was well aware of what I might be getting into! Arrived from Edison's lickety-split great delivery and price. As per all the warnings I had read, fuel lines were perished and split (this is a new saw, mind you) and failed to start. No prob's, DOA coil (New saw, remember) Advised Edison's and they kinda didn't really want to know, obviously used to calls regarding these saws. 2 weeks later, silicon fuel lines and a new $14 coil from China, and it's a pearler, starts every time and goes like a r...ocket. Oil leaks everywhere if you put it away with bar oil in it, but you get in the habit with a "Bummer" to empty the oil out when finished. This my big tree feller, and a cherished member of my saw family. If you're not able to work on saws, spend a few more $, maybe go upmarket and rest easy you can get it locally serviced. Good value for the relatively low price though, so still worth consideration.
Purchased for $169.00.
Of course these saws are not in same class as a stihl or husqvarna but I know you still will have problems with those saws and I can't justify handing over $1500 the counter to buy one I have a sx62 an sx82 and a sx92 they are all ok for weekend work but I wouldn't use them for professional logging. The sx62 chain lock keeps locking on the sx82 thottle spring keeps breaking and I had to replace the oil pump on the sx92.
Questions & Answers
how to use decompressor valve
my sx82 is not getting fuel to the carby in order to start. It will fire on aerostart, so it is not the spark
Hi my problem (among other things) was there was no metal weight filter attached to the of the end fuel line so the cheap rubber fuel line just floated to the top and was just sucking in air. You might try emptying the fuel tank and make sure there is a metal weight attached to the fuel line Other than that, if you're game, pull off the covers and check the other lines are not cracked or disconnected.
Hi Eric i can tell exactly what is wrong check your fly weel you will find the timing has sliped the wood ruff key way in the crank shaft moves which causes the machine to backfirs an will not start no matter what then you undo the bolt holding the flywheel on you will se on the washer it has been moving around you will need luck to repair i can tell you you more likely get the runaround buyer be aware
New Generator Baumr BM-x20i Cannot start it, would appear the petrol is not getting into the chamber
|Use||Tree felling, sawlog prep, and milling|
|Bar Length||61 cm|
|Features||Anti-Vibration System, Chain Brake and Quick / Easy Start|
|Engine Displacement||82 cc|
|Fuel Tank Capacity||700 mL|
Visit official website
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.