Completes large jobs efficiently
Easy to control
Wide range of speed control
Can throw discs before they're worn out
Ineffective dust collection system
This sander sands like a boss
I bought a new Ryobi sander specifically for this large job i had to do - sanding 5 light years of cornice glue off an entire ceiling off a sprawling house that we were going to put another ceiling straight over top of. Anyway the Ryobi died after a couples of hours so I drove straight to Bunnings and replaced it with the Bosch. OMG unbelievable difference, the Bosch ripped through the old cornice glue like it was made from meringue cake base. The discs do come off every now and then which is a bit annoying, but weirdly for me they were coming off when the sanding discs were ready to change. The filter seems to work well but the design is crap for getting it on and off (hence the 4 stars)
I would buy another in a heartbeat
Purchased in June 2018.
Great for what it is...
This is a decent little sander. Not high end, but not a high end price so that's ok. As a working sander, it really does that. It works. I have almost no issue with it. Solid performer. Highly recommend, provided one thing... You better not be too worried about how the dust catching system functions. Because basically it doesn't. The thing falls off with the slightest bump, but it's ok because it pretty much never caught the dust.
I'm still fine with it - i just use it outside and use a mask. Something I do for most work, so no issue for me. So I still rate it a 4 star for price etc - just know what you are buying.
Bad customer service.
Go to Bosch Australia try to get spare parts cant order through them what a joke think may have to use different manufacturer didn't mind the tools but if you cant get help from them what's the point cant order through dealer as the cost of replacing the sanding pads all the time gets to dear with dealer mark up and takes to long to get part in.
Bottom end of the market, but it gets the job done
I am just a DIYer, I knew an orbital sander would help me get a better finish on my projects, but can't really fork out for sanders at the top of the market. I have been really impressed with this unit, the adjustable power output is a nice feature and the dust collection does an ok job, better than my 1/3 sheet makita anyway.
I should say that I didn't get much help from Bunnings Brendale while selecting this, the staff member in the tool shop didn't seem to know too much about the sanders in their lineup. Tho i have also got great helpful service there when buying a drill, guess it's just hit and miss.
Not a bad sander, onto my 3rd base pad as the Velcro wears very quickly, major problem, call center not very helpful,the other problem is with this review, I only needed 22 words but I couldn't post it until I had written 50, also very frustrating, regards Craig, good bye
Speedy and efficient sander
End grain cutting boards require a lot of finishing. I choose Bosch for price and innovation, their products tend to be a lot better designed then most. Green Bosch products are generally very usable for most people, especially DIYers. If I want a professional, heavy built product then I tend to go for AEG or Mikita. But as I need to use a tool for a long period of time, I prefer something lighter.
This sander replaced a Triton 1/4 sheet orbital sander, it was struggling and died on the job (less then 6 months old). This new sander complete...d the job in half the time. I prefer Diablo papers, they make good products, I use their sanding belts as well. In terms of throwing disks, I would try another brand paper. In regard to dust collection, the same problems occur for all tools, unless you have a good shop vac don't expect the dust collection to work. Belt sanders produce dust at a much greater rate, I've had the cloth bags blow out. I work outside, use a dust mask so I don't need to care too much. Every Bosch tool I've owned so far has been brilliant, I like tools that come with their own cases as I have a place to store everything in the one box. The quality of the case matches those of the other manufacturers. If you generally buy Festool the quality might be a comedown. I don't expect that this sander will replace my belt sander or even my finishing sander, that would be too much to expect. If you have a tough job use a belt sander and the right grit for the job. Very happy and hopeful of a long relationship. If not then I'm sure Bunnings will assist. I'll tape the docket inside the case.
Older Swiss made was a solid machine
Very good machine, but with a disclaimer: I purchased mine a number of years back and it was made in Switzerland, and I have no clue what their quality is like now, so my advice might only be applicable to second hand. But it's a great machine. I've even done absurd things like polish a full terrazzo floor with it. The dust extraction isn't the greatest, and it has chucked a disc once (ever) - after I put it on not realizing it was caked in dust.
Not sure why there are so many negative reviews for this. Having read some of them, the person has used this sander for jobs it was not intended. My own experience is very positive. I have never had a disc throw or dislodge itself. Granted, the dust collector is essentially useless but my $79 ryobi shop vacuum fits it perfectly (also bought at good old Bunnings). I make furniture and built in robes, wall panels etc and this sander gives me smooth, even finishes perfect for painting, staining etc. I only mark it down for the dust collector.
great for DIY
I have only used this a few times but it does work very well if used correctly. I have read bad reviews of this product, most attributed to sandpaper 'flying off'. To test this I applied more downward pressure than needed and, sure enough the paper became detached. These machines only need very slight pressure to work correctly and I cannot fault the sanding capability with all grades of paper. It appears well made but if you are a professional tradesman I would buy the Blue Bosch. all in all this does the job for an excellent price.
Great little DIY sander
I do a lot of DIY projects & this little sander has proved to be quite the work horse, with plenty of power to get the job done. It makes a boring job quick & easy. It is reasonably light weight, with a comfortable grip & easy to handle, the sanding discs are quick to change, & the speed is altered with just a brush of the thumb.
Light-weight, powerful, easy to use.
Must take care changing the sanding disc, as the velcro grip on the discs is stronger than the glue to the base of the machine.
Parts very hard to find!
We are in the building industry so are confident with this brand. We bought this sander recently to sand decking boards at our own place and it worked really well until the velcro back on the sanding pad became less grippy and we kept loosing the sanding paper. We went back to buy a replacement at Bunnings; not carried. Online; nowhere to be seen. There were some PEX 200 replacement pads available but there wouldn't fit; seems like they deliberately have the fixings in a different location so you can't use the pads from other models. As the Pex...200 pads were around $30 and the cost of a brand new sander is $80 it's nearly not worth it. Really disappointing for a unit that has done less than two days work to have a major part wear out like that and then not have the parts readily available. Not expensive. Parts hard to find
Had to replace my heavy duty GEX 125AC Bosch sander recently. I guess I must have been wealthier in my younger days as I couldn't afford the commercial grade replacement so settled for the "DIY" model. Stuck with Bosch as the previous one lasted 10 years so I figured even their cheaper ones might outlast the even cheaper competition. First up - this is quite a good sander and does what it supposed to do. What has brought me to writing this review is it's one major failing and that is its useless "microfilter system" dust box. This thing never w...orked from day one. Removing and replacing carefully as poorly described in the manual sees it falling off all the time with dust going everywhere. Even when empty and me holding on tightly with my spare hand, dust still gushes out of every small crevice of the filter despite being securely fixed. The old one had an air bag which inflated when turned on and did a satisfactory job even after 10 years. I'm looking for a flexible hose I can attach to the dust outlet to have the dust directed away from me. Consider this before buying. cheapish, light, sands well hopeles dust filter system
Questions & Answers
Sander runs with no load but slows to a stop when placed on work??
Sander runs with no load but slows to a stop when placed on work??
Yes I have had that sort of things happened before once after using 6~7months.
But I thought that happened my casual worker press too hard down.
So I just replaced.
It was under $100 not like $260 or even $700 like fesco?.
It is cost effective way.
Hello, I had the same issue, opened it up to check if the bearing was in working order but the bearing was fine. I couldn't figure out what was wrong with my sander, very disappointed since it was relatively new and not used too much. Check YouTube , it might help you. Cheers
Hi, shorted out speed controller and a lot better, but not perfect
- The Bosch Random Orbit Sander has a 370W motor that gives it the power to deliver fine finishes on medium and large work surfaces.
- It has variable speed control which lets you choose the perfect speed for the job you’re doing and the material you’re sanding.
- The power tool has an ergonomic design that lets you work horizontally, vertically, and overhead, giving it the versatility needed for all kinds of jobs.
- It can perform both sanding and polishing, both for flat and curved surfaces, so you can use the same tool throughout your whole restoration job.
- It’s suitable for working on wood, plaster, painted, polished, and varnished surfaces.
- The sander can go from 4,000 to 26,000 oscillations per minute.
What did reviewers think of the Bosch Random Orbit Sander?
Reviews were well and truly mixed about Bosch’s random orbital sander. Among the positive feedback, the sanding tool’s power output and variable speed control was praised, with reviewers saying that it helped them get medium to large-sized jobs done in a relatively short amount of time.
The sander’s stability was also appreciated, with reviewers noting that it was easy to control and reasonably lightweight.
A notable pain point among negative reviews had to do with the discs, with some reviewers staying that the sander threw them off the head well before they had worn out - this made using the tool inconvenient and costly for them.
Another pain point was that the dust collection system was ineffective - reviewers said it didn’t catch much dust, and frequently fell off the tool.
|Release date||Nov 2012||Mar 2010||Mar 2010|
Visit official website
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.