??!
3 photos
CF Moto 650NK

CF Moto 650NK Questions & Answers (page 2 of 3)

3.7 from 40 reviews

49 questions from our users

Dave77

Dave77asked

Hi all got a 2014 650tk less then 9000ks on it bike seems to be in all prefect except for the fuel gauge when out of tank will read full and empty but when in bike stays one bar under full and will read empty fine any help appreciated thanks?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Dave, you may need a new fuel sensor. Please get in touch with one of our CFMoto Motorcycle dealers who will be able to test it. To find one please head to www.cfmoto.com.au/dealers


Paul B

Paul Basked

Hi, i have a 2015 650nks, the issue is with the RPM tacho, it all of a sudden does what it wants and sits anywhere on a 360degreee rotation . Does not reset to zero and flickers when riding at any RPM. What could this be as i cannot find out where is receives its signal from? Thanks Paul

1 answer
CF Moto
CFMoto A.CF Moto

Hi Paul, best to contact a CFMoto dealer and get a mechanic to check it out. To find one please head to our website www.cfmoto.com.au


Blayne S

Blayne Sasked

Hi my bike is coming up with error code 54 (five long flashes 4 quick flashes) but i dont understand what Error_pk (pick up) means?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Blayne, please contact your CFMoto dealer who can further assist with your 650NK. To find one please head to www.cfmoto.com.au


Sut

Sutasked

Has anyone had any trouble with the neutral light saying on and the injector light flashing?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Sut, it is best to get in touch with a CFMoto Motorcycle Dealer to inspect your bike as it is hard to diagnose with out physically seeing it. If the injector light is flashing constantly it could simply be the service light reminder. If the bike is running correctly and the neutral light is stuck on, this could be to do with the neutral light switch. Again these are only assumptions as I do highly recommend that you get in touch with a dealer. To find one please head to www.cfmoto.com.au


Bill

Billasked

Engine won't wind over it has new battery but still won't wind, bridge it at the starter solenoid and it will wind. Any ideas?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Bill, you may need to replace the stater relay. Please contact your CFMoto Motorcycle dealer who can further assist with your enquiry. To find one please head to www.cfmoto.com.au


Duke

Dukeasked

Will a 2014 cf moto motor fit my 2012 frame and belt up the same way?
Would I have to change sensors etc?

1 answer
Doug F
Doug F

Yes exact same engine


Newcastle B

Newcastle Basked

can i hook up a cigarette lighter to the wiring to a 250nk so i can use a gps?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Newcastle B, best to talk to your CFMoto dealer first.


Manoj N

Manoj Nasked

Why not tank pumping cfmoto nk 400cc?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Manoj N, please get in touch with a CFMoto dealer who can inspect your 400NK. To find a dealer, head to www.cfmoto.com.au


Shannon

Shannonasked

I have a 2015 nks which throws error code 47 oxygen sensor 1 I’ve spent 900$ on these oxygen sensors and plugged them back in and still throws the error code. Doesn’t hinder while ridding but as soon as code is on and flashing while ideling it sounds like something faulls and then it spits and splatters in idal. I’ve ripped apart the bike Checked all wires back to the ecu and also changed spark plugs. I’ve contacted a dealer with there reply of they are unsure as well anyone else have this issue?

8 answers
CF Moto
CFMoto A.CF Moto

Hi Shannon, thanks for the question. I encourage that you take the NK back to your dealer and have a mechanic to further investigate the issue you are having.

Jakes
Jakes

To cancel the error code.
1.Turn the throttle wide open.
2. Turn the key to on.
3. Wait till the Fuel Injector (FI) light lights up with one flash.
4. Flick the kill switch to off.
5. Let go the throttle
6. Wait for about 40 seconds.
7. Turn the key to off.
8. Flick the kill switch back to on.

Restart the bike and the error codes should be removed.

Matthew S
Matthew S

I have the exact same problem. 2013 650nk. Error codes 47 and 48. Changed both O2 sensors. Neutral light on dash is dimly lit. Stand can be put down while in gear and running and doesn’t cut out the motor... usually runs rough between 3500 to 4100rpm. Might be TPS but can’t source one to replace it....


Russbus

Russbusasked

Does anyone know where the ecu diagnostic connector is for fault finding on a 650i naked? I’ve found the ecu under rear seat but no dia plug ?

2 answers
CF Moto
CFMoto A.CF Moto

Hi Russbus, it is located under the pillion seat.

Russbus
Russbus

Thanks for replying but it’s not there. The ecu is but no plug for scanning !


Spock

Spockasked

Hi my 2015 cfmoto 650 fell over off the stand today on the left side , now when I put it into gear it stalls and won’t start with the clutch in, could it be the clutch sensor or something as the clutch looks to be engaging on the motor ect cheers Andrew

2 answers
CF Moto
CFMoto A.CF Moto

Hi Spock, please contact your local CFMoto dealer who will be able to assist. www.cfmoto.com.au/dealers

Ben M
Ben M

There is a kill switch in the kick stand you may have damaged it when bike fell over


Jakes

Jakesasked

Hi, can you please tell me what code to use to cancel the 15 flashes on my 650nk? Thanks

5 answers
CF Moto
CFMoto A.CF Moto

Hi jakes, please get in touch with your CFMoto motorcycle dealer. To find one please head to www.cfmoto.com.au/dealers

Russbus
Russbus

Hi
Did you solve the problem mine does the same and there is no dealer to help. My bike cuts out randomly since this has happened and I can’t find a diagnostic connector to plug in a tester.
Best regards Russ at [email removed]

Shannon
Shannon

Depending on the flashes but how many long flashes to short flashes


CJM

CJMasked

Guys my bike started leaking what looks to be water with the smell of fuel running down my kick stand on start up and idle any thoughts? Water pump maybe? Noticed a bit of oil in my guards too from another leak again i know my description is very poor but i cant see a dealer till next week little concerned how such a new bike could mess up the inner farings so much.

No answers

Steven Haz

Steven Hazasked

HI, got a 2013 CFmoto 650NKs went to get on it after a couple of weeks and as I thought in had a flat batery, so trickle charged it to a full battery but still not getting any turnover with the electric start not a click nothing any one help me with a possible solution

2 answers
CF Moto
CFMoto A.CF Moto

Hi Steven, I recommend to get in touch with an authorised CFMoto dealer who will be able to further assist. To fond one please head to www.cfmoto.com.au/dealers

Daniel B
Daniel B

i have the exact problem, have you found a solution??


Larry

Larryasked

How do we get in touch with a c.f. moto rep if there are no dealers in our area? You got a great machine but getting any information is extremely difficult.

2 answers
A65fc
A65fc

They are on the internet, look them up and ring them.

CF Moto
CFMoto A.CF Moto

G'day Larry, please have a look at our dealer listing on the CFMoto website. You may contact any of the listed motorcycle dealers in your state to further assist with your questions - www.cfmoto.com.au/dealers


Larry

Larryasked

Why has the neutral indicator light stopped working? Any ideas?

2 answers
A65fc
A65fc

Larry should take it back to where he bought it from ,I don't think that the instrument module can be repaired'

CF Moto
CFMoto A.CF Moto

Hi Larry, yes it is best to contact your CFMoto dealer to assess and rectify the issue. To find a dealer please head to www.cfmoto.com.au/dealers


Jon Q

Jon Qasked

Purchased a 2017 650nk, didnt come with an owners mamual and im unable to find one online. Messaged cf moto with no response, what should i do?

2 answers
Justin W
Justin W

Best to go back to your dealer and ask for it. Did you get the tool kit that comes with it too?

I emailed cfmoto Australia and they sent me it a link to the pdf, albeit for the 450nk which is almost identical except for the engine size (I asked for the 650nk manual as I own the 650nk)

CF Moto
CFMoto A.CF Moto

Hi Jon, please get in touch with your CFMoto dealer who will be able to provide you with an owners manual.


CJM

CJMasked

Hi again I’m still having my oil light come on after engine has warmed up but than only at idle rpm, is this a service reminder light? Checked oil pressure switch and have changed oil.... Also selecting natural is still near impossible getting really frustrated especially with dealers and there lack of care for anything regarding warranty work. I’m in Melbourne can anybody recommend a good dealer? Also does everyone’s 2017 650nk run supper hot? Thanks

2 answers
Justin W
Justin W

No it's not a service reminder. The 650nk had a known issue with faulty oil pressure switches.
Recommend you have it replaced under warranty.
I have had mine replaced at A1 motorcycles in Ringwood.

Yes my bike runs really hot... 92c - 100c in the current 30c heat.

CF Moto
CFMoto A.CF Moto

Hi CJM, please get in touch with a dealer and get a mechanic to check out your bike. A full list of Melbourne dealers are listed on the CFMoto website - www.cfmoto.com.au


Ajay

Ajayasked

My bike is 650nk today not start of my bike n not operating sensor pls send me an answer?

1 answer
CF Moto
CFMoto A.CF Moto

Hi Ajay, I recommend to get in touch with one of our CFMoto Motorcycle dealers who can help diagnose the issue you have with your 650NK. To find a dealer please head to www.cfmoto.com.au/dealers


CJM

CJMasked

Hi I recently purchased a 650nk ive done 1200 or so km and last ride my oil light came on??? As there was no manual with the purchase in ENGLISH?! And not even a download on line?? I cant diagnose my problem as the oil level is fine, also above there was a guy mention he has trouble with selecting neutral i also have this issue. Any help?Thanks

4 answers
Justin W
Justin W

Oil light is controlled by the oil sender switch which is known to be faulty on this bike (I had mine replaced under warranty).
Check that it's not leaking. It is on the bottom of the bike near the oil filter and sump plug.

Contact cfmoto customer service and they can send you a digital copy of the manual (I got one).

The neutral problem happened to me but after two oil changes (at 500km and 1200km) it was fine. There are a lot of metal particles in the first oil changes. Since this bike uses a wet clutch I'm guessing the fresh oil helps.

CJM
CJM

Thanks mate

CF Moto
CFMoto A.CF Moto

Hi CJM, we recommend to get in contact with a CFMoto dealer who will be able to organise a 650NK owners manual and answer any of your questions on the bike. To find a dealer please head to the CFMoto website - www.cfmoto.com.au


Page 2 of 3

Get an answer from our members and CF Moto representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.