Reviewer Photos & Videos
- Cinetic Big Ball Allergy
Not worth the money, unlike older Dysons. Design flaws plague this model.
As I've had this vacuum for a few years now, I feel I am now able to provide a comprehensive review of its abilities. We used to have a Dyson upright that had served us well but we weren't a fan of how heavy it was to push and how difficult it was to use the tightly retracted hose without the unit tipping over, so we decided to stay within the brand and purchase a more familiar barrel-type vacuum (like our previous ones), despite this being the most we spent on a vacuum, which was reasonable when expecting this to last many years. We spent extr...a on the Allergy variant as we were interested in the turbine brush for use on carpeting. The truth is, it isn't really that great on any floor surface. On my old house's laminate floors, the floor tool simply pushed dirt around rather than sucking it in unless you made a conscious effort to go over dust very slowly. On tile, it's marginally better but not very much so. On carpet, it was fine initially on shallow loop pile carpet, but on any cut pile rug/carpeting (still shallow), it struggles to pick up surface level dust even with a clean bin and otherwise good suction. The floor tool despite it being Dyson's "best", needs constant passes just to get surface level dust, let alone embedded dust which there's no way of proving if it is removed or not. We never wear our outdoor shoes inside so the carpets never get too dirty, but for those who do, I doubt this machine will inspire any confidence as it is already struggling with regular house dust. The BIGGEST issue with this machine is the design flaws and poor build quality. The most troublesome issue is the weak latch mechanism on the bin. It is a small bit of plastic which holds the bin shut but I have faced the same issue many have complained about since the very beginning, which despite how tight and secure it is when installing the bin, upon removal, the bin lid will flip open and dump all the dust you’ve been vacuuming up back onto your floors. I’ve attached an image of the size of the catch, beside a 20c coin for scale. It is absolutely tiny and over time as the motor’s heat/vibration makes the plastic mechanisms not as tightly sealed as it is brand new (this part sits right up beside the motor), it is able to slide away from the catch. I cannot fathom why they would cheap out on this vital piece, when they simply could’ve made a wider ridge for the hook to catch on. To date, I’ve gone back to Dyson numerous times and they just keep sending me the same flawed bin which works fine initially but then exhibits the same issue after less than a year (and I don’t even vacuum very frequently). I cannot trust it anymore and have to have my hand under the container as I carefully walk to my bin to empty it. That brings me to the emptying part – it’s nowhere near as easy or hygienic as they make it seem. The bottom lid gets dust and hair in its crevices, and as with any other bagless there seems to be a small plume of dust that flies around as you empty it. Many times, I’ve had to even use my hands to aid clumps of dust out into an old plastic bag. I cannot believe this is marketed towards ALLERGY sufferers, I don’t have any allergies and it’s sickening enough emptying this one and its poorly designed bin without dust flying everywhere. Within a year, in early 2017, the wheel fell of the unit and upon inspection, it was an in-warranty repair as the heat generated by the unit had weakened the plastic attachment. It had to be sent back to Dyson to be attached back on. That was pretty disappointing as I’ve never once had that happen on previous models but the wheel on this unit seems to be a thin disc of plastic built more for aesthetics than function, but I’m just glad it happened within the warranty period. I’ve paid for the extended warranty a couple of years back as the manufacturer’s warranty was about to end and the machine had given me enough worries as it is. Now that is about to end soon and overall, given the disappointing price to performance ratio of this vacuum, this is the very last Dyson I will own. I’ve always believed in the bagless hype but after seeing that even this the ‘ultimate’ bagless vacuum, has not been appreciably better and in some cases worse than my previous one, I may very well get my very first bagged vacuum (going by Product Review, I seemed to have found some top-rated Mieles, plus I’ve already had good experiences with the brand, so I am tempted). I was never a fan of consumables but seeing what a pain this is in terms of maintenance and emptying, my mind is now open to alternatives. Just don’t fall for the marketing – the whole bin design is flawed and it is NOT a pleasant experience dealing with this in the long run – but then again this is a brand that demonises well-priced traditional alternatives to sell you their own $800 tower fan or $500 hairdryer, so why am I surprised that quality went down the drain and margins shot up with this most-recent series of vacuums. Never again…
Purchased in May 2016 at Dyson for $599.25.
This unit is terrible , Ive had it for 2years and now the rotating head wont rotate, suction is awful even after emptying barrel.
Head is forever flicking up more dirt than it sucks in .
Purchased in November 2017.
Questions & Answers
Hi I am wondering where is the filter located for Dyson Cinetic Big Ball allergy
The Dyson Cinetic Big Ball features Dyson Cinetic Science. Dyson Cinetic Science is so efficient, the dust and dirt is separated from the air into the bin, without the need for a washable filter. The machine has a post motor filter which is there to capture carbon dust from the motor however is designed to last the lifetime of the machine without the need to wash/replace it.
Dyson Cinetic Science features ultra-efficient cyclones with Cinetic tips. These tips allow our cyclones to be small, and they vibrate to ensure the ultra-fine dust doesn't clog them, rather, ends up in the bin for you to empty when you have finished your cleaning session.
We have a dyson cinetic big ball allergy ... the power head has just stopped working. We have dismantled and reassembled the head and there are no blockages and there are no blockages in the machine. It still has good suction, just the power brush is not working. Any ideas?
Make sure it's not tangled with hair or anything like that (cotton etc)
Thanks, we have done that too with no success.
I am sorry to hear about this.
We would kindly ask you to email firstname.lastname@example.org with your details and our Dyson Experts will be more than happy to help in getting this resolved.
We look forward to hearing from you and assisting you.
I have a Dyson 214891-01 Cinetic Big Ball Allergy Barrel Vacuum and recently bought a Dyson 920018 Swivel Hard Floor Attachment, but it does not fit my vacuum! This is despite it being advertised as "fits all models except DC01, DC21 Motorhead, DC23 Motorhead and cordless models". Is there an adapter to make it fit?
Thank you for your query.
In the box included with your Cinetic Big Ball machine at time of purchase, there is an adaptor included to allow use of accessories purchased at store. You can see it in use here: https://www.youtube.com/watch?v=iGAgc2Cw6wg
If we can assist further, please just reach out via email@example.com and we will be more than happy to help.
Get an answer from our members and Dyson representatives
|Category||Barrel Vacuum Cleaners|
|Cord Length||6.6 m|
|Suction (Air Watts)||250 AW|
|Manufacturer Warranty||2 year(s)|
|Release date||Apr 2016|
- MPN: 214891-01 and 36262391
- GTIN13: 5025155024010
Other Barrel Vacuum Cleaners
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.