Good on fuel, handles well, cruise control but their cost saving design really annoys me!
Bought the 5spd manual Fiesta urgently after selling the Subaru WRX with little time to research. The car did well in a few department, but let down on a few.
Good fuel economy - 5.6L/100km (mainly 80kph suburbian driving) to 6.8L/100km (110kph cross country)
Good handling - For a FWD, the fiesta's corner with precision. I can confidently corner on narrow country roads at freeway speed (Can't compare with the AWD WRX). I won't be able to corner with this much confidence in other small cars in its segment.
Comfortable for long distance...
Trouble with transmission
Purchased this car brand new. Good enough drive/easy to maneuver, but the transmission they use has a fault that Ford do not seem able to fix.
Quite often when accelerating, the car will shudder a bit. First few times I mentioned to the service dept, they said they updated the software. Eventually had to get replaced and still had issues.
Good small compact car but POOR TRANSMISSION
Powershift transmission is terrible. It often shudders and have issues with shifting on lower gears (especially on road humps). Sent it to Ford to fix the issue, but after a few days issue was back. Every time I bring it in for it's annual service, issue is fixed but after a few days it always comes back. I've had the car close to 5 years now and it's getting worse. Although its fuel efficient and easy to park, the transmission is very bad. If I had known that it's a common issue with Ford Fiesta cars, we probably wouldn't have purchased the car.
What a lemon
Our 2009 Fiesta CL has gone through 2 sets of brake pads and rotors. Now at 90,000 km our timing belt has failed. It was due to be changed at 150,000. The warranty for Ford is nowhere near any of the other car brands. We will never buy another Ford again - EVER.
Find out how Ford Fiesta WS compares to other Hatchbacks
Know better, choose better.
I have a 2009 automatic Ford Fiesta and it is falling apart. Also is now underivable as it will not select a gear. Just want to burn it!!
Questions & Answers
Hi. I am looking at a 2009 Fiesta Zetec that has come up for sale. What problems should I be looking out for?
They are a good car. If it's an auto make sure it is not the dual clutch type. Look at service history, kilometres, city or country travel, how it has been looked after, general appearance, tyres, rust and any evidence of accident damage. They ride well, are quite in town and on the highway, economical, light steering effort and have a reasonable sound system if you are not under 25. There can be unwanted surprises with any secondhand car, buying from a dealer may be a better bet than a private sale. Depends on price and if you have mechanical knowledge or a good honest mechanic. The blinker switch may be on the left and windscreen wipers on the right, the 2011 WT model is.
I have the 2009 WS Zetec auto. Make sure the services are up to date, the timing belt change is expensive. Check the front rotors and pads. They're not a big job, but make sure you're supplied the correct rotors as I was sold WT rotors which have a smaller PCD (wheel stud spacing) and had to stuff around and pay more for TRW which are OEM and have no coating and so rust. Depending on driving style and place (country vs city) they could need changing at 140-160k kms. I've found the auto box is a rather abrupt changer, and the power is hardly exciting. Nor is the fuel economy because they have to work so hard. The blinkers are indeed on the left, which was no drama for me as my SUV also has them on the left. If the blinkers stop working, check the mirror wire. I changed the blinker stalk assembly and that wasn't the problem. I find it a bit rattly with cheap-sounding doors and the stereo makes the exterior chrome trims vibrate, which is really annoying. The stereo pumps out pretty reasonable sound, but I've had issues with reading USB sticks. I occasionally get an error "line busy" which if it persists, requires a battery reset. Otherwise it's comfortable and surprising roomy for such a tiddler (I am quite tall). The ride and handling is superb for such a little car. It really does feel like a bigger car once you're under way, and it swallows up bends with aplomb. As long as they're not uphill bends, that is. The Zetec is by far the best choice, more airbags, better stereo, cruise control an upgraded interior and suspension. Be aware that the 16" Zetec wheels are often knocked about with gutter rash, and they are really expensive to replace, even second-hand, as in around $300 depending on condition and whether fitted with a decent tyre.
I have a 2009 WS Fiesta Zetec with the 1.4l/auto gearbox combination. Purchased second-hand from interstate and the car was well past needing a service. I put it in to the local mechanic to have the timing belt changed, plus new plugs, water pump, oil and filter and I fitted a new air cleaner myself. I drove the car some distance before the service, now after the service the car feels down on power (there's not a lot anyway, I know) and the fuel economy has plummeted, from 6-7 to 8-9. The day after I got it back the car went into limp-home mode (error code P061C) but a long drive yesterday didn't see that happen again. The car struggles at 100km/hr and hunts between 3rd and top gears. A curious and annoying aspect of the timing belt change was the cam seals, which come with the belt kit. The main cam sprocket (or sprockets, since it's DOHC) has to be removed to change the seals- but they are held on by bolts which have to be replaced, as they are "single use only" or torque to yield. They don't come in the kit and this caused a delay of 4-5 days (with a weekend in the middle), so the car was at the workshop for 8 days. I'm concerned that something else happened at the workshop, or the camshaft timing is out. Any ideas?
The cam timing could be out. Normally the cams are held in position whilst the belt is being changed. Have you looked up the P061C code? It seems it's related to an engine monitoring system for engine RPM which could point to the cam timing being out. I don't know why the cams seals were replaced unless they were leaking or if your vehicle has high kilometres. If the WS air cleaner is the same as the WT it is a good idea to clean our the rubbish at the bottom. Leaves, paper, plastic etc can gather there. A light sheet of paper or plastic could be sucked up under the element and partially block it, a long shot, I know.
Thanks, Stevo. The first thing that came to mind was the cam timing. I drove the car for several hundred kms before the belt change so have some comparison before and after. The error code points to the cam sensor or the crank angle sensor. It's booked back into the workshop. I did a 100km+ drive after the cam belt change and it was woeful: even worse, when I checked under the bonnet, the ancillary belt was beginning to fall apart. It seems that as a stretch belt it didn't like being reused. The cam seals were changed because they came with the kit. I've asked the kit retailer to look into why they put cam seals in even if they might not be needed, but if they are changed, the sprocket has to come off and so new bolts are required. Catch 22.
It was the cam timing. The belt kit came with three different bolts to "lock" the crankshaft and they used the wrong one.
ijust got 5 w 40 penrite engine oil from repco they recomented for ford fiesta 1.4 ltr is that ok
The person at Repco probably checked the recommended oil for the Fiesta so would have gone with that information. Penrite seems to be an oil that is recommended by spare parts shops. 5w 40 would be OK in Australia, especially with summer approaching & if it was a full synthetic oil they gave you. I once bought a Valvoline oil recommended by the label on the container for our Fiesta & when filling the engine noted it was an SL API rated oil. I have since used the SN rating fully synthetic oil in Fuchs, Nulon and Valvoline. It's also an idea to look at the ACEA rating A3/B4. Buy your oil when on special & save 25% to 50% at Autobarn, Repco or Supercheap!
I specified 5W-20 when the workshop did my service. They sell and use Penrite brand. The manual recommends Castrol, and next time around I may use Edge 0W-30. I wouldn't use 5W-40 if I had other choices.
Get an answer from our members
|Transmission||Automatic and Manual|
|Drive Type||Front Wheel Drive (FWD)|
|ANCAP Safety Rating||5 Stars|
|Fuel Consumption||6.9 L/100km|
|Fuel Tank Capacity||43 L|
|Engine||4 Cylinder 1.6L|
|Max Power||88kW @ 6000rpm|
|Max Torque||152Nm @ 4050rpm|
|Country of Manufacture||Germany|
|Manufacturer Warranty||3 year(s)|
|Release date||Jan 2009|
|Discontinuation date||Dec 2009|
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.