We bought this unit 5 yr ago and has been the best pool cleaner ever. It broke a side cover roller support a while back but I bought a new one and replaced it along with 2 new rollers and filters. It climbs the wall and the steps and does and excellent job all round.
Purchased in March 2015 for $1,400.00.
Works quite well
Tried several pool robots, and finally had to choose between the dolphin and Tigershark. The Tigershark was cheaper, less complicated, much lighter to carry, and the rep (in my case) more reasonably. Works flawless since 3 years. I don't believe it actually learns your pool layout, but its random program in the end gets everywhere, and frees itself of any entanglement, not necessarily in the most efficient way though. I have a Fiberglas pool and the climbing capability are enormous, too much really. I had to use various ways of limiting...the waterflow and put balast on the robot, otherwise it climbs to high. After a year, when the filter become slightly clogged, it works actually better and now its just right. I would wish for a program the keeps it on the bottom, because for me it spends to much time cleaning the waterline. The dirt container is big and it is pretty good in also collecting larger depres. Fairly easy to clean. The main problem is squeezing out the air of the rollers to make it sink to the floor, best not to let them dry out. Another problem is that somtimes the lock for the dirt compartment can dislodge, and release the dirt as you lift the robot out. One needs to watch that. On the whole I am happy with it and think its simplicity is its strength. It keeps the pool floor, walls and steps very clean. The two programs take 90 or 180 minutes, but you can always take it out earlier.
[Has this product improved the appearance of your pool?]
I cannot work out what pattern it uses - seems to be random. But, when I go away and come back, the pool is spotless, so can't complain.
[Do you find the pool cleaner easy to use and maintain?]
I do not have a lot of debris coming into the pool from trees, so I sometimes do not need to empty out the compartment. Our pool is also fairly modest at 7m x 3m.
I set it up for my neighbour recently, who does have many trees around their larger 13 x 4m pool. The debris was filling up t...
Find out how Hayward TigerShark compares to other Robotic Pool Cleaners
Know better, choose better.
Better than most
I spent a long time looking for a great pool cleaner and don't think there is one. That aside this is the best of the bunch.
After three months I did have a warranty problem and the retaile was difficult to deal with. However after some strong language the manufacturer stepped in and dealt with magnificently , arranging shipping, repair and return magnificently.
Cleans the pool of sand and cleans the sides very well. Handles leaves and larger debris OK.
Easy to handle and pretty care free.
Not Quite excellent
Had a Zodiac Baracuda T5 before this unit (check out my review on that little Gem) so anything would be a step up. I am however very happy with the Tiger Shark. It was a toss up between this unit and the Dolphin. I primarily went with this unit because of it's extra large leaf litter collection area. Must say it is huge and does a great job. Cleans all of the pool, up and over the water line. It climbs so high, if the water level is not right I reckon it would climb out of the pool. Very impressive. There is nothing this thing will not pick up ...- long palm frondy things, palm nuts, every conceivable leaf - large and the smallest possible. I have even emptied construction rubbish inadvertently flicked into the pool. Emptying and cleaning is a breeze - takes about 2 minutes and we are ready to go again. I use the unit only once a week - seriously don't need to run it anymore and coming from a world of having that stupid Zodiac thing running all the time and constantly cleaning leaves and kicking the thing when it stops - this was quite a difficult concept to come to terms with. I no longer have pump suction issues, the filter is just doing the job it was designed to do, filtering the water. My pool has been cleaner or the water cleaner. The skimmer basket actually works again! I have reduced my operating hours and I feel the entire pool thing is working and can actually be efficient. What I am not too impressed about (which is why it is not quite perfect) I understand that the floating arm thing is there for a reason and it does work well in letting the unit creep along the water line, but I can never remember which side I had the thing on the last time around. The power cable seriously needs an anti-twist device. This is the one thing that the Dolphin has over the Tiger Shark.
Questions & Answers
My shark is about 6-7 years old. A few weeks ago, when I start it , it runs for a few seconds and stops. After starting it two or three times it would finally keep going for the entire cycle. Now I have tried about fifteen times and it will only run for a few seconds and stop. What's up? Thanks
Very sorry C in Sumter, but I have not experienced that problem. Its possible some small leakage may have occurred in the motor/control housing. You will most likely have to go to the people you purchased it form or directly to TS as I don't recommend opening that unit.
The bottom cover keeps coming loose and all the debris it picked up falls to the bottom of the pool. Very poor design. Do you have any ideas to eliminate this problem ? Maybe something to wedge under the clip
my Tigershark (TS)seem to struggle to climb my step/ledge that runs the length of my pool and into a shallow area that is still deep enough to cover the tiger shark with water. The TS is completely cleaned out so not too heavy to climb and has had this issue since we purchased last December. Is there a way to fix this?
Well, I have to ask, did you check back with the pool shop that you bought it from?
In the meantime, there are a couple of ways of adjusting the water flow through the machine.
Both described in the manual.
The 1st is the restrictor plate on top of the machine. If the machine does not climb, removing it may help.
Next we have the "high velocity inlet". having this in place increases the velocity across the gap, so the suction is greater, but the volume of water is decreased.
So hard to predict if this will help. No harm in trying with it installed or not.
I have found that running the machine for 4 hours gives best results (rather than 2 lots of 2 hours).
|Category||Robotic Pool Cleaners||Robotic Pool Cleaners|
|Release date||Sept 2010|
|Replaced by||Hayward TigerShark QC|
- GTIN13: 0610377061339
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.