??!
8 photos
Mitsubishi Electric L4 Glass Mini 650L French Door

Mitsubishi Electric L4 Glass Mini 650L French Door Questions & Answers

MR-L650EH, MR-L650EN-GSL-A (Argent Silver), MR-L650EN-GBK-A (Brilliant Black), MR-L650EN-GWH-A (Glacier White)
4.7 from 59 reviews

25 questions from our users

Iwan G.

Iwan G.asked

L4 Glass Mini 650L French Door

is there any stock in Perth?

No answers
zed s.

zed s.asked

L4 Glass Mini MR-L650EN-GWH-A (Glacier White)

What are external dimensions

1 answer
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Zed,

The latest dimensions are published on the product web page:

http://www.mitsubishielectric.com.au/mr-l650en-gwh-l4-glass-mini-french-door-refrigerator.html

Best Regards,
Mitsubishi Electric Australia Support.

Shazzie

Shazzieasked

L4 Glass Mini 650L French Door

We just bought a MR-L650EN fridge & are very happy with it. I did read some reviews about damage to seals if not opened & closed with care. Obviously, the right hand refrigerator door needs to be closed after the left, but does it matter it the left door is opened before the right?

1 answer
Piajess
Piajess

I haven't had any problems opening or closing left before right or vice versa. Doesn't seem to matter which side you open or close first.

Shazzie

Shazzieasked

L4 Glass Mini 650L French Door

Is the 60mm back clearance included in the max depth spec?

5 answers
mndmnd
mndmnd

Mine sits a total of 800 off the wall from the plaster to the face of the doors. I have it as far back as possible, but it's likely because of where my power point is that stops me from pushing it a little further back.

Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Shazzie,
No, the clearance is not included in the product dimensions, as mndmnd has suggested when plugged in should give you the 60mm clearance at the back.

Thanks, Mitsubishi Electric

Shazzie
Shazzie

Thank you. Our outlet is to the side. What is the maximum clearance required for correct operation of the fridge if we don't have to take the plug into acount?

Robyne

Robyneasked

L4 Glass Mini 650L French Door

Just bought this fridge a few weeks ago and my vegetables are going bad within a few days. Carrots are limp. Not sure what is going on

3 answers
silver sailor
silver sailor

Check the humidity setting on the vegetable drawer. As a general rule of thumb, use the low-humidity setting for anything that rots easily. That means apples, pears, avocados, melons, or stone fruits. The high-humidity drawer is great for anything that wilts, think thin-skinned vegetables like asparagus or leafy vegetables like greens and fresh herbs. Perhaps have one drawer set on low and one on high and separate the veggies accordingly.

mndmnd
mndmnd

I've never had a problem and I've had the fridge for a year.
Have you changed where you've bought your veggies? I do know that some 'cheaper' suppliers such as some discount fruit and veg shops, but one is also a supermarket newer to Australia, my fruit and veg go off quite quickly, so I don't buy from there. You might pay more at Coles and woollies, but at least your food doesn't rot quickly. Just a thought if this applies to your situation.

Cozzy
Cozzy

That is strange. We've not had any problems like that.
Have you fine tuned the settings? If you read the manual fully, you'll find a section further in on getting better settings for the fridge and freezer. It is summer after all, and much hotter in Australia than most other countries. I hope that helps.
Also, you must make sure the left door is closed gently and fully, apparently if the left door is slammed, the centre flap may not seal between the two doors properly (I read that in the manual too). But, I'm not saying this is happening, just asking.
If all else fails, contact the store you purchased it from. There could be a fault. Best wishes

Lara M.

Lara M.asked

L4 Glass Mini 650L French Door

Recently just purchased the fridge and there seems to be soo much condensation forming. Droplets dripping off containers and food, my previous fridge did not do this. I am concerned.

2 answers
silver sailor
silver sailor

I bought this fridge one month ago and do not have this problem. Have you checked the Users Guide (page 24) Check there are no gaps in the doors? Is the fridge level? Are the doors being left open frequently? It's under warranty so don't worry

Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Lara,

If this issue has not already been resolved then we would like to investigate it further. We have sent you a private message requesting some details.

Best regards,
Mitsubishi Electric Australia Support.

Lali

Laliasked

L4 Glass Mini MR-L650EH

I bought my fridge from Harvey Norman in 2016 and my freezer compartment rubber strips have started to come off and the cooling is not consistent ie didn’t cool and food would go off. Can I please get someone from Mitsubishi to help look at the two problems? Thank you

No answers
Coops

Coopsasked

L4 Glass Mini MR-L650EH

I’m finding small dints on my doors all over the fridge freezer in really strange places as well like under the handle at the top where no one grabs, anyone else have this problem?

No answers
csb

csbasked

L4 Glass Mini MR-L650EH

Could Mitsubishi Electric Official please answer:-
Is the spec for fridge housing width of 950mm + 30mm + 30mm = 1010mm critical for warranty?
Our fridge nook is in the midst of a bank of 600mm-deep cabinets. It has 955mm width and 600mm depth and a fully open top. I may be able to enlarge width by an extra 16mm or 32mm, by moving the adjoining cabinets. The clearance would then be 17.5mm each side. The sides will be unapposed for the front-most 265mm (865mm fridge depth + rear clearance, minus 600mm cabinet depth). Is it critical to have 30mm each side despite the top being open and the sides only partly- apposed, or is it simply to facilitate installation and removal? Will the narrower width of our housing void warranty?
Thank you.

2 answers

hi. im not an expert but think I have the reasons for min clearance. i double checked this before installing mine. . From memory, the condenser can get very hot.and not operate correctly without adequate clearance and airflow. for example, if the confined spaces are too small, that air heats up, feeds into the freezing cooling mechanisms, making it overheat. I read this in the manual or priduct info somewhere..I dont know about warranty issues but its better to provide more space, than too little. hope that helps.

peterlonz
peterlonz

My unit is installed with very minimum clearance on one side & the back. Plenty of clearance at top & one side.
We had a service call relating to temp control & serviceman did not remark on the installation.
I made some effort to check temp at top & on low clearance side but it's just warm & often you can't detect anything! I think (I'm no expert) the clearances you describe will be fine but make a habit of checking for excess heat build up particularly on hot summer days.

Dozza

Dozzaasked

L4 Glass Mini MR-L650EH

How to dismantle shelves for cleaning?

1 answer
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Dozza,

Here is the relevant section from the user manual on how to remove the shelves:

http://www.mitsubishielectric.com.au/assets/leg/MR-L650_L710EH-A-shelf-removal.png

Kind regards,
Mitsubishi Electric Australia Support

Tracie D

Tracie Dasked

L4 Glass Mini MR-L650EH

whats the wattage or volt or amp of this fridge?

1 answer
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Tracie,

240V, 48.7W, 4A starting current, 1.1A Rated current.

If you have any other technical questions, please contact us directly on 1800 651 808 so we can give you an immediate answer.

Best regards,
Mitsubishi Electric Australia Support.

Mary

Maryasked

L4 Glass Mini MR-L650EH

Can someone please describe the finish on the white version of the Mitsubishi L4 Grande/Mini fridge?
I'm leaning towards white, because it looks beautiful in the pics & I'm wanting to brighten up my kitchen. I'm hoping that it has a similar look to white high gloss cupboards, or maybe even has the glass top finish, but I'm worried that it might just have the finish of a traditional white fridge & possibly look a little bit more dated than the stainless steel or the black.

3 answers
Scott
Scott

Ours is white and the finish is like a hi gloss with a sparkle if anything i think the stainless looked more dated when they are side by side

Mary
Mary

Oh great! Thanks so much for letting me know!

Mary
Mary

Oh great! Thanks so much for letting me know!

Joe

Joeasked

L4 Glass Mini MR-L650EH

Purchased December 2017. When I close the right side fridge door the right side freezer door breaks it seal and opens about 30mm. Do the doors have magnets and or something designed into the hinges that help the doors to completely close and seal?
The left side freezer door has something that causes a definite positive closing action from about 75mm open.

2 answers
ninkasi
ninkasi

The doors have a slight lean to make both sides close 'automatically' (via gravity) when they are a few cms away from actually being closed. So your right hand door should *not* pop open if it is already closed. Use a bubble level or even 'phone app to check to make sure that the fridge is perfectly level - both front to back and left to right. the levels can be adjusted by the feet. If that looks good, and there's nothing inside the fridge like a bottle or veggies or something that is forcing the door back open then possibly the door itself is damaged in which case you should contact Mitsubishi.

Joe
Joe

Thanks for that but it was not the case. The hinges have been replaces and all is well.
Also the center door jamb that is spring loaded has been replaced as the bottom spring came out of its position.
Another problem was the spring coming out of position on the ice maker trays.
Apart from the above, I am extremely happy with the fridge.

movn

movnasked

L4 Glass Mini MR-L650EH

Hi, does the 650 variant of the fridge have coil whine?

My current fridge makes a ton of noise, you can hear the coil whine from 14 metres away https://www.productreview.com.au/p/westinghouse-wtm3900-wtm4200-wtm4400-wtm5200/m/wtm5200wb-520l-white.html

What are the freezer trays made from? plastic or tempered glass?

3 answers
Mishwal
Mishwal

Not sure I have the 710l and if it wasn’t for the light when you open the door you wouldn’t know it was working

ninkasi
ninkasi

My "mini" is quiet as the proverbial church mouse. To answer your other question, there are no trays as such but (as is the case with most freezers) the drawers are made from plastic. Not a bad thing as, frankly, glass would be way too heavy. Although they are plastic, they seem solid enough. The trays/shelves in the fridge compartment are tempered glass and seem to be built to last like the rest of this fridge!

peterlonz
peterlonz

Need to confirm: This fridge is super quiet, you won't know for sure it's even running!

James

Jamesasked

L4 Glass Mini MR-L650EH

Just Purchased my new 650 EH .. Had to cancel delivery as realised It wont fit through the walk way in to the kitchen .. Can U take the door/ doors off to enable access to my kitchen ?

cheers

4 answers
hodderclan
hodderclan

Provided you are able to do a little mechanical work with a spanner and a screwdriver the doors are not difficult to take off and refit. I was able to do that at our place but it is not plug and play, you need to carefully record what you do to take off the doors and put them back carefully. A digital camera record of each step makes it easy to replace them and you certainly should make sure that the doors and parts are carefully handled when not connected to the fridge. You don't have to be an engineer but some skill is needed. John

Olga L
Olga L

I had to have the door replaced as their was a dent on it when it was delivered, I guess if you contact Mitsubishi they could do it for you at a charge. No harm in asking if they want you to keep their product.

Gurpreet
Gurpreet

sales rep at Harvey Norman told me that Mitsubishi rep can help us to get though doors, so pls ask the team they will help you out

Jeanette

Jeanetteasked

L4 Glass Mini MR-L650EH

Why is my freezer on an L650EH french door fridge/freezer frosting/freezing up. Have tried a few things and have pulled the drawer out to see if that makes a difference. Looking at fridge thats the top drawer on the right side. Thank you.

1 answer
Deb
Deb

I'm not sure mine doesn't maybe you need to adjust the freezer temperature because we are in winter

SB_Canberra

SB_Canberraasked

L4 Glass Mini MR-L650EH

we bought MR-L650EH-ST-A 4 months ago. It was working fine until this weekend, I noticed a lot of condensation inside the fridge, including the crisp vegetable compartment. Is this normal? What can I do to prevent this?

1 answer
KiwiMike
KiwiMike

I read other reviews that had this problem and they called Mitsubishi who evidently changed the unit, mind does has this issue somewhat but will wait to see if it settles down within the month

Jane

Janeasked

L4 Glass Mini MR-L650EH

Is anybody who bought the L4 Grande model-650 litres recently able to tell us where it was manufactured? Mitsubishi themselves here in Aust. were not able to tell us? - It was the Service Dept..

2 answers
terrasprite
terrasprite

Hello Jane,
my L650EH was made in Thailand.
David

Lydia Jin
Lydia Jin

made in thailand

Suzy

Suzyasked

L4 Glass Mini MR-L650EH

Hi, The depth of the fridge is listed as 805mm in the product specifications. I presume this includes door and handles. Can anyone tell me the depth of the fridge minus handles? I am considering getting the fridge as the height and width dimensions fit my kitchen, but worried whether it is going to stick out too much.
Thanks

2 answers
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Susan,

The depth of the MR-L650EH, excluding the handles is 765 mm. Hope that helps.

Kind regards,

Mitsubishi Electric Australia Support

Raj
Raj

Hi Susan.

Do you know anything that can do this ? Some sort of service tech that I can get a number of so that I can call them?

Denise

Deniseasked

L4 Glass Mini MR-L650EH

We purchased a Mitsubishi French Door Refrigerator Model MR-L650EH yesterday. Once removed, the Energy Rating label on the door, has left a sticky residue. Please advise how to remove the sticky residue, as warm water, a neutral detergent and a soft cloth will not remove the sticky residue?

3 answers
Devans
Devans

I am not a Mitsubishi expert, I have used Eucalyptus oil for sticky labels on jars.

Richard W.
Richard W.

Yes I did not have that problem but mentholated spirits usually works but I would test it on the door surface first .

ninkasi
ninkasi

Assume you have fixed this by now, but for anyone else with a similar issue you can get a product called "De-Solv-It" from places like Bunnings. A small amount of that on a paper towel or cloth will remove that glue without damaging the surface. I also use it for removing the residue when taking off stickers from containers, gifts, etc. It has a citrus smell, but that goes away fairly quickly. Find the smallest bottle of the stuff you can find - it lasts for ages.

Page 1 of 2

Get an answer from our members and Mitsubishi Electric representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.