??!
3 photos
Mitsubishi Electric MSZ-GL71VGD (7.1kW)

Mitsubishi Electric MSZ-GL71VGD (7.1kW) Questions & Answers

MPN: MSZGL71VGDKIT
4.7 from 38 reviews

5 questions from our users

Geoffrey

Geoffreyasked

MSZ-GL71VGD (7.1kW)

What do all the letters stand for. Geoffrey Thomson.

2 answers
Jen
Jen

As a consumer and not an electrician I presume they represent the Model of the unit.

Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Geoffrey,

Here's a breakdown of that the letters in our models numbers mean:

MS - Mitsubishi Electric split system, indoor unit
Z - inverter model
GL - series number. (GL superceded GE series)
71 - capacity
VG - Sub-name
D - Demand Response Enabled Device (DRED); used in Queensland mostly.

Kind Regards,,
Mitsubishi Electric Australia Support

power2004

power2004asked

MSZ-GL71VGD (7.1kW)

just had my 7.1kw fitted and it is running fine but when I went outside to check the outdoor unit the fan wasn't working is this normal as it wasn't a very warm day when it was installed and I tested it...?

2 answers
Vince
Vince

I wouldn’t be worried if the unit is at the required temperature inside the house you will find it will probably stop spinning outside as it only runs when expelling the warm/cold air from the inside of the house, it will run when required which is part of the energy saving.

Stewpot
Stewpot

When first started the outside unit will not run for 10 minutes or so. That is normal. It may also stop if inside the house is at the correct temperature and this will save power. If the inside unit works properly nothing is wrong. The outside unit can be very quiet so you need to carefully check if the fan is turning.
One way to test it is to turn the inside temperature to its lowest setting and turn the fan to the highest speed. Outside unit should start running after about 10 minutes.

Mirela

Mirelaasked

MSZ-GL71VGD (7.1kW)

Hi,
We bought Mitsubishi aircon MSZ-GL25VGD 2 years ago, 5 year warranty as well,was working fine till this month,wouldn’t cool at all just blowing .Also called Mitsubishi costumers service couple times and finally got call from technician,he assuming."?is gas leaking by him that is not under warranty,he said will cost us $500 repairs,$80/hr. It left us speecless.
However,we read warranty doesn’t said anything regarding gas leakage.
Would be very grateful if you answer my question and give me correct info.
Thank you

1 answer
Glenn d J
Glenn d J

Hi , find the paperwork concerning the installation , if found see if installation warranty is more than two years if so ring company to redo flares
( most probably where leak is ) if out of installation warranty period , you may be still able to talk to manager and plead your case of faulty workmanship and not bag his company on social media . Regas and repair of flares by a honest Friggie on a 2.5kw should only be around $350 at most for a back to back installation . Good luck .

Denise M

Denise Masked

MSZ-GL71VGD (7.1kW)

Do you have a interest free plan for 12 months ?

2 answers
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Denise, we don't offer interest-free payment terms as we don't sell direct. For something like this please contact one of our retail partners. You can find your nearest retail stockist here: http://www.mitsubishielectric.com.au/wheretobuy.html

Kind regards,
Mitsubishi Electric Australia Support

power2004
power2004

Harvey norman they gave me 60 mths interest free but I had to ask though as its normally 18 for aircon

JIM T

JIM Tasked

MSZ-GL71VGD (7.1kW)

what is the outdoor unit height width and depth?

1 answer
Mitsubishi Electric
Support C.Mitsubishi Electric

Hi Jim T,

Thank you for your inquiry.

The dimensions of the MUZ-GL71VGD is as follows:
Height - 880 mm
Wight - 840 mm
Depth - 330 mm

Here is the link to the MSZ-GL Series Product Flyer for more information: http://www.mitsubishielectric.com.au/assets/LEG/Flyer_MSZ-GL_Aug-2016.pdf

Hope this helps.

See all Mitsubishi MSZ-GL Series questions

Get an answer from our members and Mitsubishi Electric representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.