took a while to work, needed a new fuse
all set up but the inverter wasn't reading, took a few emails to resolve, needed a new fuse, now ok,
good guys who make sure that work is done properly and diligently
Got it installed on time.
One of the solar cell got broken, they fixed it and replaced it under warranty.
Professional guys. will explain things to you properly
Solar panel fault
My solar was continually switching off. Finally contacted More Green Energy who finally agreed it was a fault and would replace it under warranty. Unfortunately the replacement had to come from China which took nearly 3 weeks. A long time in the middle of summer! As this panel seems to have failed in other installations it should have been kept in stock in Australia! Anyway thanks for your efforts Monty - all is good for the moment.
Great price & poduct, but!
Very happy with the price, products we chose and most of the staff we dealt with. There just seems to be a communication issue between the sales and install teams that led to longer than expected delays before installation and then some further delays getting everything finalised. In the end we've got a system that is pumping out close to 5kwh on a regular basis and great daily outputs.
Find out how More Green Energy compares to other Solar Retailers
Know better, choose better.
Questions & Answers
I noticed that in your details you are not an approved clean energy council approved provider CEC certified. So why do you tell people you are and you are not a Approved Solar Retailer ASR More Green Energy?
I'm one of several cheated upon. I called CEC and they told me there are a lot of complaints about them
I advise you not to tolerate the scams from this company they have continued to conduct poor quality business principles since being exposed by the Energy Regulator October 2019 there are complaints constantly regarding refunds, quality, poor performance, supply non contracted products and not showing up on schedulled installation dates. The management refuse to answer calls to handle complaints or servicing of installation and they are well known by the department of Fair Trading , The Building Advocacy , The Energy Regulator and Clean Energy Council. These people are giving the renewable energy program a bad name in Australia. Yes they are cheap but at what price poor quality products, poor quality installers, poor after sales service, poor management conduct I suggest across all these areas. Looking at the complaints.
I rang the CEC today and they’ve stripped all affiliation with them. They told me they’ve received many complaints about dodgy workmanship and terrible after sales
Can you send me your quote for 6.6kw system with Trina and Jinko mono perc black panel combine with Fronius inverter ?
I did not purchase Trina and Jinko mono perc black panel. I purchased Risen RSM120-6-315M 315w panels
I also did not purchase that system, if you want to compare quotes you should ring another company. I'm still waiting for my system to be fully installed....23 weeks and counting.
I used a Fronius Primo inverter - its faulty, works only 2 days a week since it was installed 6 months ago, and MGE are refusing to come back and fix it. Go elsewhere
What are the main difference between MONO- CRYSTALLINE and POLLY CRYSTALLINE solar panels that your company provide?
Thank you for your question.
Please find detailed response of your questions below:
MonoCrystalline solar panels, silicon is formed into bars and cut into wafers. These types of panels are called “MonoCrystalline” to indicate that the silicon used is single-crystal silicon. Because the cell is composed of a single crystal, the electrons that generate a flow of electricity have more room to move. As a result, MonoCrystalline panels are more efficient than their polycrystalline counterparts.
Polycrystalline solar panels are also made from silicon. However, instead of using a single crystal of silicon, manufacturers melt many fragments of silicon together to form the wafers for the panel. Polycrystalline solar panels are also referred to as “multi-crystalline or many-crystal silicon. Because there are many crystals in each cell, there is to less freedom for the electrons to move. As a result, polycrystalline solar panels have lower efficiency ratings than MonoCrystalline panels.
Let us know if you have any more doubts and we would be more than happy to clear them for you.
More Green Energy Team
Get an answer from our members and More Green Energy representatives
|After Sales Service||No|
|Services Provided||Solar Product Retailer|
|Clean Energy Council Member||No|
|Clean Energy Council Recognition||None|
Other Solar Retailers
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.