??!
1 photo
Smeg DWA6314X (Stainless Steel)

Smeg DWA6314X (Stainless Steel) Questions & Answers

MPN: DWA6314X
3.6 from 21 reviews

15 questions from our users

Amna

Amnaasked

DWA6314X (Stainless Steel)

I am using the dishwasher from 4 months and never had any issue but yesterday when it turned off after the whole cycle the dishes were not clean properly and next day when I turn it on it’s just showing me the power button light when I turn on and no light for the function button and not turning on. What could be the issue ...

2 answers
Jude
Jude

It’s still under warranty get smeg to fix it I would

Smeg
Lesley R.Smeg

Hi Amna. Thank you for your review. We would love to have an opportunity to assist you with this matter. Can you kindly email us with your full name, address and a contact telephone number so we can contact you. Our email address is service@smeg.com.au and please mark to the attention of Lesley. Kind Regards, Smeg Australia.

David.t

David.tasked

DWA6314X (Stainless Steel)

I have a smeg dishwasher model dwa6314x not even 2years old and is stopping during cycle. I push on door then start button and finishes cycle. What is the problem

2 answers
Jude
Jude

Mine is only a few weeks old but sounds like door closer is not closing properly my old lg had same problem so kept it shut with a Velcro strap try that then you need to fix door

Smeg
Lesley R.Smeg

Hi David. Thanks for your review. In order for us to assist you can you kindly contact us to discuss this matter. It is possible you will need a service call. Our phone number is 02 8667 4888. KInd Regards, Smeg Australia.

Brett H.

Brett H.asked

DWA6314X (Stainless Steel)

We have just installed our new smeg dishwasher and it keeps stopping after about 5 mins on any cycle type. The error code is the 1st and 4th led. Any ideas?

1 answer
Smeg
Lesley R.Smeg

Hi Brett H - thank you for your question. Error one means that the flood switch has been activated. You will require a service call - can you kindly email us direct with your full name, address and a contact telephone number so we can organise a mutually convienent time for this to take place. Our email address is service@smeg.com.au - kind regards, Smeg Australia.

Robyn

Robynasked

DWA6314X (Stainless Steel)

Hi, Our dishwasher purchased in March will not turn on. No light on panel at all?

1 answer
Smeg
Lesley R.Smeg

Hi Robyn.
Thanks for your enquiry. Can you kindly email us direct so that we can contact you to troubleshoot this problem. Our email is service@smeg.com.au - please also screenshot your question and we will be in touch. Thank you Smeg Australia.

Peavvvvvved.

Peavvvvvved.asked

DWA6314X (Stainless Steel)

My brand new SMEG DWA6314X just installed and purchased on 07072019 door doesn’t shut properly and only the power button is on along with the red - next to the star. I have held down the other 6 buttons and none of them do anything. And YES, the machine is level. Thoughts.

2 answers
Smeg
Lesley R.Smeg

Hi Peavvvvvved, thanks for your review- we would love to have the opportunity to discuss this further with you could you kindly email me direct with your full name address and contact telephone number ? Once we have this information we will contact you direct to discuss this further - our email is Service@smeg.com.au please mark to the attention of Lesley kind regards Smeg Australia

Steve
Steve

Peavvvvvved have faith in the after sale service. I had a problem with a motherboard, out of warranty. Smeg repaired it FOC within days. Love the unit and bought another for our beach house. Sure you'll be looked after if you contact them. I dealt with a Mr Cullen (Nat Service Man)...very helpful.

Carmen Grima

Carmen Grimaasked

DWA6314X (Stainless Steel)

Have just installed a Smeg DWA6314X stainless steel and have tested a cycle however when it gets to the end it seems to be giving me what seems to be the E7 error - 3 flashing lights on the cycle pad and a flashing light on the pause/start indicator - and does not finish. However it seems to go through it's cycle of filling and emptying without an issue. I have tried interrupting and annulling but nothing seems to work. Any help?

2 answers
chinaplate1954
chinaplate1954

I’m sorry if it is a error message I am unable to help and it’s best you contact smeg. One thing I have noticed with my dishwasher is that towards the end of the cycle it does have all 3 lights on the pad flash and the pause flash and I had to leave it while longer for it to work through its cycle then eventually it switched off, this was different to other dishwashers I had owned. Perhaps this may be the solution, leaving it longer to work through its cycle as they take some time.

Smeg
Steve C.Smeg

Hi Carmen Grima,
It sounds like there is an issue with the turbine water meter or possibly the pressure switch,
Please contact our Service Department on 02 8667 4833 to arrange a service call.

Regards,
Smeg Tech Support.

Kelli O

Kelli Oasked

DWA6314X (Stainless Steel)

How do you open the dishwasher? It is brand new, just been installed. Done our trial cycle, the door will now not open!

1 answer
Smeg
Steve C.Smeg

Hi Kelli,
The door should just pull open. If it is not, then the door latch may have moved up a little, making hard to open.
We suggest contacting our Service Department on 02 8667 4833 to arrange a service.

Regards,
Smeg Tech Support.

erin

erinasked

DWA6314X (Stainless Steel)

Our dishwasher screen does not turn on we only purchased this 3 years ago and it just stopped working. Any suggestions?

1 answer
Smeg
Steve C.Smeg

Hi Erin,
Sounds like it could be a fault with the timer or door latch and will require a service call.
Please contact our Service Department on 02 8667 4833 to arrange this.
Regards,
Smeg Tech Support.

Leah

Leahasked

DWA6314X (Stainless Steel)

Hi, my instruction manual does not tell me how to use the option selection of washing top or bottom load only. The light comes on when I press the option but how does it know which basket I have stacked?

2 answers
Smeg
Rodney M.Smeg

Hi Leah,
The 1/2 load option allows you to use all the baskets, even if they are not completely full. It will reduce the energy and water consumption as well as the running time of the program.
Hope this helps
Regards
Smeg

chinaplate1954
chinaplate1954

Thanks for asking the question Leah, I had no idea either. Thanks Smeg.

Alexandra S.

Alexandra S.asked

DWA6314X (Stainless Steel)

Dishwasher is almost 2 yrs old now and we are starting to see issues. We clean everything monthly and recently the LED panel in the middle no longer lights up when we start it. We can start any cycle however as soon as it comes to the part where the tab needs to be released the dishwasher beeps twice and the cycle stops. Water has started pooling at the bottom and the tap dispenser is still closer. Called the customer service and they tried to reset over the phone, which didn't help and now we need to wait 4! weeks to get someone to service it which is frankly quite ridiculous. Anyone here who had the same issue and can help so we do not have to call anyone in?

3 answers
chinaplate1954
chinaplate1954

Sorry your having issues. You do need to have service come out and see to your machine and at some stage I’m sure every appliance will need a service, with a bit of luck some won’t. I can’t offer any advice on this but frustration you must feel.

Smeg
Steve C.Smeg

Hi Alexandra. I am sorry to read this review. My name is Steve Cullen and I am the National Service and Spare Parts Manager for Smeg Australia. Can you please email me direct - steve.cullen@smeg.com.au and provide me with your full name, address and a contact telephone number. I will also require the name of the Authorised Agent that is attending this call. I will then get back to you direct. I await your email. Regards Steve Cullen.

Sue K
Sue K

I'm having the same problem. I've tried all of the usual troubleshooting things and it's still not going past the tablet release. Water is pooling in the bottom also! I'm hoping it's still under warranty as I'm still paying it off! Frustrating! Did you fix your problem. I'd be interested to know how? Thanks

Joe

Joeasked

DWA6314X (Stainless Steel)

Does the top unscrew and come off? It won’t fit in the hole otherwise

3 answers
chinaplate1954
chinaplate1954

Hi joe, bad news I’m afraid, no the tops don’t come off, they are called free standing dishwashers, the hole you have in your bench is for a built in dishwasher and they don’t have the casings around them so that’s the type of dishwasher you have to buy. Most brands these dishwashers but I am not sure if SMEG do. Hope this helps.

chinaplate1954
chinaplate1954

Joe here is the smeg web site they say they have the dishwashers without the worktop on the top. http://www.smeg.com.au/dishwashers/underbench/ Chase up the models to see where you can get your best price.

Col
Col

Hi Joe , tops do come off, i fitted mine under counter top. The front height adjusters at the bottom of machine have to be repositioned to holes slighty further back as to seat kitchen kick plate properly. When removing top it seems to release a small plastic clip which stops machine from working, as some people are experiencing ( machine turns on but won't respond when any buttons are pressed ) Nothing to do with levelling machine! I resolved this with a tie wrap which holds trip switch in its normal position. The instruction manual states you need to use an authorised person to remove the top, so maybe i've been unlucky when removing top and disturbed plastic clip or manufacturer do it intentionally. I had no such problems when fitting other dish washers.

Matto

Mattoasked

DWA6314X (Stainless Steel)

The rinse aid light is on and the dishwasher won't start after turning on. Any help?

1 answer
Smeg
Smeg

Hi Matto , unfortunately you will require a service call .
Regards Steve D .

Catherine

Catherineasked

DWA6314X (Stainless Steel)

Dishwasher was working great for 3 weeks, then stopped and the "Rinse Aid Lack Warning Indicator" came on. Filled the Rinse Aid container as per instructions in the manual, warning light went off. "Power On" button is now the only one working, no other lights showing. How do I get this to start?!

1 answer
Smeg
Smeg

Hi Catherine please call Smeg service on 02 8667 4833 to arrange for a technician to look at your dishwasher.
Regards Chris

Ele

Eleasked

DWA6314X (Stainless Steel)

My dishwasher doesn't dissolve the tablet. I read the manual and I just want someone guide me through it. And i feel that the door handle will eventually break each time i close it the clicking sound is very rough. Any ideas?

1 answer
Smeg
Rodney M.Smeg

Hi Ele,
What program are you experiencing this on? We recommend you select the FlexiTab option button on the control panel when using tablets. Some tablets don't dissolve completely if you are using very short programs which last less than 30 minutes. We would recommend switching detergent brand and choosing a dishwasher tablet brand which dissolves quickly, especially if using short programs.
Regards
Smeg.

Jason

Jasonasked

DWA6314X (Stainless Steel)

Have had my dishwasher for 8 months and has been great. Lastnight we set it to run as per usual but it showed an error e6 code.
Tried again in the morning ... water sitting in the bottom and checked filter..... seems all good.
Mmmm something wrong with pump??? Any ideas?

1 answer
Smeg
Steve C.Smeg

Dear Jason,I'm the National Service and Spare Parts Manager for SMEG Steve Cullen, can you please email me your full address , contact details and a copy of your purchase invoice so that I can investigate this matter further . email: steve.cullen@smeg.com.au Regards Steve Cullen

See all Smeg DWA6314 Series questions

Get an answer from our members and Smeg representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.