Only worked for 1 year
Ground too coarse after 1 year of use and couldn't get it to grind fine coffee for a stovetop. Even put in 3 spacers as recommeneded but still it would not work properly. Waste of time and money. Bad product. Would not recommend, unless you're happy to buy a new one every year. Guess you get what you pay for....
Purchased in January 2018 for $100.00.
Sunbeam EM0440 Grinder Does Not Grind to Fine
Bought this grinder from Amazon. First time grind produced coarse coffee even though setting is fine grind. Sunbeam Customer Care sent two (2) washers but the grind is still not so fine. Another set of double washers was requested which I fitted under the burr. The grinder is now working fine with the added washers.
Purchased in January 2020 at Amazon for $69.00.
It does the job. I'm sure there are better grinders that are more consistent. But it is cheap and effective enough for the purpose. It is however poorly designed. Quite an amount of grind stays behind inside and builds up on itself unless the machine is shaken or bashed, or a brush is inserted to get at the grounds. Maybe a little too compact? Particularly messy when coming out. Static maybe?
Find out how Sunbeam GrindFresh EM0440 compares to other Coffee Grinders / Roasters
Know better, choose better.
- Selected Review
Good grinder but poor hopper and messy
I got the 0480 conical burr grinder a few years ago after trying a couple of cheaper Sunbeam grinders.
The cheaper machines would not grind fine enough on the finest setting and were basically useless.
This machine is relatively low cost but feels very robust (solid) and has a great range of 30 odd settings.
It grinds nice and slow and the big burrs dissipate the heat so doesn't burn the coffee.
I used to grind at 13 for the Sunbeam Cafe machine but now use number 4 for the Rancillio Silvia which needs a fine grind.
The hopper is ...
I got this cheap ($90 delivered to a rural area in 2009) I wanted the conical burr and didn't want to splash out for something more expensive when I wasn't considering upgrading my Sunbeam EM6910.
For the Sunbeam or other home machines in the lower price bracket, this grinder does a fine job. It seems reliable after more than two years of service and seems consistent in grind also.
My main complaint is the design! It is SOOOOOO messy, if you are not super gentle and careful when grinding you will knock the holder off and spill your coffee...everywhere, the tray won't catch the coffee because it is not attached and so is never where you want it to be (i.e. it doesn't stay tucked into the base of the grinder) Taking off the hopper is very hazardous as the lid does not stay on, rather, it just sits on top - as noted previously the beans also fall out of the bottom which does not close properly. Cleaning is a nightmare - the amount of ground coffee left in the machine is unacceptable - you don't want this in you cup the next day so it needs to be cleaned out.
Questions & Answers
Frequently Asked Questions about Sunbeam GrindFresh EM0440
Why is my grinder making a loud noise?
Check for any blockages.
My coffee gets caught in the chute and sprays everywhere, what should I do?
Clean the residue from the chute. Try grinding into a container closer to the spout, then pour into the group handle. This will catch the grinds which are statically charged and going in all directions.
Why is there no difference to my grind despite adjusting the settings?
Check the grinder burr is seated properly.
My burrs are not aligned, how do I fix it?
Make sure everything is clean, with no obstructions.
How do I achieve consistency in my grind?
- Use beans from the same brand, blend and volume. Ensure beans are fresh before use.
- Make sure all parts are clean before each use.
- Experiment with the amount of time in which you grind the coffee beans.
- Over time as blades start to wear, slowly adjust your grinding time.
Latest Consumer Questions
I bought two grinders one for normal coffee one for decaf. The decaf will only do a course grind, no matter what setting, I have disassembled it and checked all assembly against the correctly operating grinder, but can only get a course grind. Whats happening?
Firsty can I ask how old is the grinder?.
I have just sent you a private message if you could kindly respond via that please.
Was just cleaning the burrs....I have accidentally placed and turned the collar on my grinder before replacing the hopper.Now it is stuck tight, the lock button is depressed and I cannot move it or remove it to put the hopper on. How can I remedy this please!
on my grind fresh clean and put head back on turn half way round and has jammed
Get an answer from our members and Sunbeam representatives
|Category||Coffee Grinders / Roasters|
|Grinding Mechanism||Conical Burr|
|Coffee Bean Capacity||250 g|
|Number of Grind Settings||25 settings|
|Dimensions||382 x 135 x 262 mm|
|Manufacturer Warranty||1 year(s)|
|Release date||Oct 2008|
- MPN: 2327, EM0440 and SEM0440
- GTIN13: 9311445018682
Other Coffee Grinders / Roasters
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.