Weber Q 200 Questions & Answers

Hi Peter, we don't sell that model here in Australia so we're not all that familiar with it but typically side tables will need to be flipped inside the barbecue, then the lid closed on top as they should fit underneath the side vents.

Hi Lis, that depends. There have been updates to all ranges over the years so it's hard to talk generally.

If you give us the product you've got, and the specific accessories you want to use, we can tell you whether they'll work together :)

Hi Purcy, an AU code Q was manufactured in 2012. Let us know if you've got any more questions.

Hi Purcy, we have a few different codes to determine years depending on the barbecue, but in this case, it's the same as a Kettle AU, 2012.

Hi Mark- you should have received a small set of grill clips that will help support the hotplate and grill in your older model Q- if you didn't receive these, send us an email at social@weberbbq.com.au with your address and we'll send you out a set

Hi Sourjyo, yes, you can convert your barbecue. We sell conversion kits that are available through our customer service team. You can contact them on 1300 301 290, and please be sure to have your serial number handy to speed up the process. Thanks!

Hi Barbara, yes it should come with a drip tray. We do offer this as a spare part, so could you please call us on 1300 301 290 and have your serial number handy and we can organise a new one for you :)

Hi Glenn, no it won't as they are two different size barbecues and therefore different size accessories to fit them.

Hi Christine, the Q range was brought to Australian in 2003, so it could be as old as that. Your serial number will tell us the exact age of the Q you have- just send us the two letters at the beginning of the serial. Cheers!

Hi Megan, as that is an older model, you are limited. If you head to your nearest Specialist Dealer (or alternatively, call our head office on 1300 301 290) and enquire about a Stationary Cart (part 8460) - this part is our older cart and if there is stock left, it will fit your Q.

Hope that helps. Thanks

Hi tckn, you can buy a conversion kit from our head office. The cost can vary so best to get in touch on 1300 301 290 and have your serial number handy. Thanks

Hi Carsten, it depends on what you mean by coating; sometimes it can just be a carbon build up on the surface that is peeling away, and is not actually the coating. Please send us some pics through our Facebook page https://www.facebook.com/weberBBQAusNz/, or you can call us on 1300 301 290. Thanks!

Hi Wayne. The Q200 did not come with a thermometer in the lid; only the 220 and current 2200's do. You don't necessarily need a thermometer in the lid, as all the recipes that we provide are written based on setting, rather than temperature.

You can't really attach one without drilling a hole in the lid, which could break it, void warranty and not make your barbecue work as efficiently.

You could look into other thermometer options, like our iGrill range, Instant Read Thermometer or Snapcheck thermometer. You can find all the accessories here: https://www.weberbbq.com.au/weber-accessories/

Hi Edward, thanks for getting in touch. It sounds like yourr rubber 'o' ring has gone missing, and it's a vital part of your barbecue's gas system.
Without it, you could have a gas leak and create a potentially dangerous situation.
Can you please call us on 1300 301 290 with your barbecue's serial number as we will have to organise a replacement hose/regulator system for you; the little 'o' ring on the end cannot be replaced on it's own, so the entire connection will have to be replaced.

Thanks

Hi Matt, thanks for getting in touch. Can I ask what you're trying to cook?

After 10 minutes on low, I would expect the Q to be around 155°C (311°F), but that will increase slightly over the cook.

Hi Eve,

Thanks for your question. We can supply a new igniter kit along with a battery, as they are covered for the life of the barbecue. If you call 1300 301 290, we can organise one for you.

If you just want to change the battery, then you need a AAA.

Thanks

Hi AMS, thanks for getting in touch.

We can certainly help you with some replacement parts. It sounds like your Q is on the older side, but we'd need your barbecue serial number to confirm the age, along with the replacement parts it needs.

Can you please email us at custserv@weberbbq.com.au and we'll go from there. Thanks

Hi Quentin, thanks for your question.
The Q200's aren't made anymore so you'd be looking at either the Q2000 or 2200. When you buy your barbecue, you get the cookbox & lid, leg frame already assembled and the grills in a separate part of the box.
It's definitely worth checking with your local Weber Specialist Dealer, as they usually have a combo deal with covers and other accessories! https://www.weberbbq.com.au/where-to-buy/
Thanks!

Hi Linda, thanks for getting in touch.

The maximum turkey that will fit on a Q200/2000 is 3kgs.

It sounds like you may have an older package of the trivet, as we used to suggest using foil, but have since stopped recommending that and suggest you use the convection trays as they are designed for the layout of the Q's, and foil can promote gas pooling and reduce airflow.

If you have any more questions, please let us know.