DigiCrystal HDT-9500 Reviews
More images (2)
- Terrible
Posted on Feb 20, 2009
Reviews: 1
Pros: looks ok!Thats about it.I Think It Will Look Better in The Bin!Were it was designed for!
Cons: It Worked for 4hrs,Then Decided to Turn Itself OFF and ON,Not Good For The Sound System,Now it only works for about 10min Before The Problem starts!This Happens Even if its not on Stand By Power and The Unit is Completly Cool.Thay also Box them up as a "VIBE HDTV Set Top Box",Dont Be Fooled.There Just Crap!
Overall: This Ones Headed For The Bin Complete Rubbish!Buy a Good Well Knowen Brand,Not This crap,Ive Been Had,I Hope You Dont!
- Bad
Posted on Feb 28, 2008
Reviews: 1
Pros: Cheap, easy to setup.
Cons: Sync problems, overheats which results in front channel and time display cleared.
Overall: A good cheap unit, to enable you to see HD channels. There is the sync problem, usually on HD channels - I've had to use the digital channel instead of the HD ones because the sync issues were so bad. Website says to turn the unit OFF instead of leaving in standby mode to prevent overheating. I would not recommend this settop box, and recommend going upmarket if you had the cash.
- Good
Posted on Feb 3, 2008
Reviews: 9
Pros: Cheap, Good Quality picture on LCD
Cons: Occasionally loses sound when turned on, resets by changing channel.
Overall: For the price it is a good buy, the high definition picture quality is quite good. The sound problem only happens occasionally and can be fixed by changing channel, so it isn't a major issue.
- Good
Posted on Jan 13, 2008
Guest User
Pros: Has a high quality video
Cons: sound is a fraction out of sync with the video. Should have extra 2 audio plugs and in a better position.
Overall: Would rate higher if it did not have out of sync problem. Channel changer works fine. Easy to operate. Needs extra audio plugs.
Check out other brands of Set Top Boxes / TV Receivers / DVRs
 |
 |
 |
 |
 |
 |
 |
 |
 |
Model:
HDT-9500
- Fully MPEG-2/DVB compliant
- Multi demodulation selection: QPSK, 16QAM, 64QAM
- MPEG-2 HD/SD decoding (MP @ HL/ML)
- Dolby AC-3 or MPEG-1 audio decoding
- YPbPr output: 1080i/720P/576P
- VGA output: 1080i/720P/576P
- HDMI output: 1080i/720P/576P
- CVBS and S-Video output: PAL (NTSC not compatible)
- Conversion between HD and SD program
- Teletext output with both VBI and OSD
- Multi-language subtitle output supported
- Aspect ratio: 4:3/16:9 on full screen and letter box
- Dolby 5.1 channel or PCM digital audio output
- Electronic program guide (EPG)
- Parental guidance
- Software upgrade via RS232 port
- 32 bits true color on screen display
- Elegant casing with easy-to-use front panel
- Tuner Input frequency: 147~862 UHF & VHF (IEC Female Connector)
- Input signal level: -80dBm to -20dBm (75Ω)
- Input impedance: 75dhm
- Loop through output impedance: 75ohm
- Output format: MPEG-2 transport stream
- Standard: DVB-T EN300 744
- Demodulation: QPSK, QAM16, QAM64
- Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
- Standard: ISO/IEC 13838-1
- Input max.bit stream rate: 100Mbps (Serial)/12.5Mbps (Parallel)
- Standard: ISO/IEC 13812-2 MP @ HL/MP @ ML
- Aspect ratio: 4:3, 16:9 on full screen and letter box
- Video resolution:1920x1080 Max
Power
- Input voltage: AC 100V-240V, 50Hz/60Hz
- Power consumption: 15W Max
- Insulation: More than 10M? at 500Vdc
- Withstand Voltage (Hi-Pot): I/p to O/p:3kV (1 min)
- Temperature rise: <75 on winding & core; <50 on casing at 264Vac @ 50Hz
- Safety Standard: Designed to meet IEC/EN6065
- Operation temperation: 0°C~ +40°C
- Dimensions:66 (H) x 357 (W) x 255 (D) mm
Related Reviews of Set Top Boxes / TV Receivers / DVRs
