Review your last buy on ProductReview.com.au
ICT F-10 Fuel Treatment

ICT F-10 Fuel Treatment

ICT F-10 Fuel Treatment
5.0

9 reviews

Positive vs Negative
100%0%
  • Thumbnail
  • Thumbnail
  • Thumbnail
  • See allThumbnail
Brand Manager for ICT F-10 Fuel Treatment? Claim your listing.
9 reviews
Joel
Joel6 posts
  Verified

Blown away by this product. I have two diesels, an Amarok and a Mazda CX8, both at about 200,000km. Had the Mazda since new, recently got the Amarok. Put this in the Amarok which I just assumed was getting to be a tired engine, lots of clatter - within half a tank it was transformed. Amazing given previously tried far more expensive products made… Read more

no difference. Went and grabbed some more and put it in the Mazda. Half a tank later and the difference there is also very noticeable. Quieter, much less injector noise, and seems to be smoother. I am converted. Note in both cases I used the initial dose rate of the little 200ml bottle to a tank of fuel.

Gavin D.
Gavin D.SA14 posts
 

Was highly recommended by a sales person on Autopro renmark. I've used various fuel treatments over the years which seem to do nothing. Trying it in my hilux n70 ,skiboat and two stroke tinne fuel. Well see how it goes Show details

Ask the reviewer
Dave
DaveNSW3 posts
 

M8 107 Dirty Injectors – I own a 2019 Harley Davidson Softail Slim. The engine light came on. Bike was backfiring under engine brake. ECM codes P0131h & P0151h came on. A mate suggested F10. I added the amount for first time use and topped it up with 98 fuel. Took it on a run but played up once again. I decided to run the full tank through so took it for a freeway run and perfect. Bike is running perfect!!! Show details

Robert
RobertACT41 posts
 

F10 saved me a lot of money - Brilliant – Have a Mitsubishi Challenger 2002 model Fuel injection in excellent condition. Had a major problem with motor cutting out at bad times and difficult to restart. Engine warning light a brown engine shown. Rang my mechanic who said it could be numerous problems and a big job to find the fault could be the Jets/Fuel pump/Fuel filter/air… Read more

intake/computer/Sensor/ etc etc. Could cost a lot. Car had exhaust fumes and some fuel even dripping out of exhaust. I bought a bottle of F10 at Repco and put the bottle into my fuel. Had a qtr of of a tank of fuel so drove down and filled it up with Premium Ron 98 to give it clean fuel as a safeguard. It has been a week now and no problem with cut outs and stalling. Car is quiet and running smoothly with lots of power. Warning light does not appear. I have saved a lot of money and will continue using F10 from now on and Use Premium fuel on every 2nd/3rd fill. The cost will be a lot less than having the costs incurred by a mechanic.

Ameen
AmeenVIC4 posts
 

Excellent – 2008 Landcruiser engine 4.5 V8 d4d injector noise reduce and engine is responsive and turbo kicks in around 1500 rpm -2500 rpm very quickly in the traffic light just 0-80km without hesitation I am going to love this product. I tried different products in the shop trouble getting complicated becomes very sluggish and chaga chaga noise hard start as well. Show details

Dolina S.
Dolina S.WA
  Verified

Great product – I recently bought a second hand Toyota Aurion and i always put a fuel additive in my second hand cars. I was super impressed with this product it’s some good stuff!! The engine is quieter and the fuel consumption is better. By the way this is my very first review on anything! Show details

Gary
GaryNSW
 

Better than the rest..and Aussie made – F-10 fuel treatment is the best I have ever tried. I have a 2010 APV Van with almost 500K on the clock...was slightly sluggish on hills etc before Additive....now climbs hills as though the road was flat,,,and also runs smoother..will be buying all the time...Thank you for this product... Show details

wayne
wayneNSW8 posts
 

f10 fuel treatment – I have a 2009 isuzu dmax with 150000kms on it its always serviced and well cared for and only run with bp diesel, on different days the isuzu felt not smooth as it normally would and a little noisy here and there i use to run chemtech diesel additive until today and a truck mechanic told me try f10 fuel treatment so i did and what a difference… Read more

more power so much smoother im impressed , im now going to run it in 2000mod rodeo 2.8 diesel with 350000kms on it also in boat with 60hp yamaha four stroke with 85hours on it. This aussie made product does what its says and works , i also rang the owner of the company and let him know how impressed i was he was polite genuine and also gave great advice

  • Thumbnail
  • Thumbnail
  • +1Thumbnail
Bradley S.
Bradley S.WA8 posts
  Verified

F-10 Fuel Treat - An amazing product! – I have found ICT F-10 Fuel Treat to be an amazing product. So much so that I thought I'd write a review. I first used this product to help start an old lawn mower that had been sitting in a friends shed for a few years. It was covered in dust and the fuel in the tank had evaporated completely. When we put in new fuel, it took a lot of effort to… Read more

start the old engin. When it eventually started, smoke filled the yard and the lawn mower had trouble running.

I bought a sample bottle of F-10 after doing some research into fuel additives. A quick google search said that F-10 has the ability to treat all types of fuel including diesel, petrol(gasoline), two-stroke, bio-fuels and bio-fuel blends such as e-10 and e-85 and methanol. 1 Litre of F-10 will treat up to 4000Ltrs of fuel.

I mixed about 40ml of F-10 into a 5 litre fuel can then, used this mixture to run the mower for 5 minutes. I then left the mower to stand overnight and that is when the magic happened. The next morning the lawn mower started first pull of the rip cord. Some smoke appeared for about 2 seconds and then… no smoke at all. It was like a different machine. It sounded healthy too (as far as a small petrol motor can).

It has been about 4 years since then but I have been using F-10 in our Kia Cerato, Subaru XV and Subaru Outback H6 – All vehicles purr. I am one satisfied customer.

If 1000ml will treat 4000ltrs of fuel, then to calculate how much F-10 you will need each time you fill your tank..

1000 / 4000 * fuel tank size = ml of F-10 per tank refill.

I would recommend the following doses to start with...

80ml on first fill 80ml on second fill 30ml every so often (2-3 tanks)

1Ltr is around AUD$57 but I beleive this is well worth it to keep the your fuel system clean.

Extra Information

Brand Manager for ICT F-10 Fuel Treatment? Claim your listing.

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.