Masport Quantum XTS60 Questions & Answers

Hi Michael,

Thank you for your question. For anything related to our mower catchers please reach out to our support team on 1300 366 225 (Australia) or by email at CSAU@masport.com.au.

Best regards,

Masport

Hi,

So, we can best assist you please contact our support team, they can be reached on 1300 366 225 (Australia) or by email at CSAU@masport.com.au.

Kind regards,

The Masport Team

Hi Pravin,

Thank you for your query. If you could please contact our team at CSAU@masport.com.au our team will send you a photo to help you locate the serial number.

Masport

Hi Michael, send us an email at csau@masport.com.au and our customer services team will be able to help you.

Hi Stewart. Please call our customer service team on 1300 366 225 and they can help you. Alternatively you can fill out the following contact form: external link  Kind regards, The Masport Team.

Thanks, much appreciated

As per the name it is supposed to be 6HP (without load I imagine) which converts to 4.47kW. Anyway, don't believe in the published numbers. From my experience, it has plenty of power. Of course that depends on the condition of the engine - well looked after engine hence plenty of compression.

Thank you. Wow that was super quick. I’m just trying to get a bit of info on this engine to sell and this is the only website that has any info. Thanks again.

Looks like it is 190cc

external link 

Can't go wrong with Synthetic SAE 5W-30.

Here is info from manufacturer: external link 

Most likely what you need is the Briggs and Stratton Quantum XTS-60 engine manual, not so much the masport manual unless you need to repair wheels or instruction for removing blade, etc. Anyway, the engine manual isn't easy to get anymore I think. Here are instructions but Briggs and Stratton website won't return anything. They contacting Briggs and Stratton if you can. There are plenty of Briggs and Stratton youtube videos that might give you lots of help too depending on what you are trying to do.

Do you have any specific question?

Masport manual: external link 

Manual download instructions: external link 

Briggs and Stratton manual download site: external link 

Oil change is simple through tipping the mower upside down to allow oil to drain out. Blade is a single long blade with a hex but in the middle? I found it very hard to remove that without air tool and the right tool, especially if theres build up of dirt on it or rust on the blade where the nut is. Don't do it without the right too and risk wearing out the head. If you just bought it, suggest taking it to a shop for service at least just this one time so they can give it a good proper service, clean, etc and perhaps even a new blade. It will cost more money but may feel like new after. If you want to save on that then consider sharpening the blade instead with a metal file.