Euromaid 1505TISS / 1505TIWH Questions & Answers
Verified
I live in a rental and the oven dials images and degree have rubbed off. Please advise what is what!
Hi Michael, I'm sorry to hear of this. Please see the attached for a pic and parts available. LINK: https://cdn.productreview.com.au/document/thread-message/366426af-0ecc-4d21-b5a2-d2a8aa08a60b LINK: external link Thanks
What are the settings for the most right nozzle? Eg. Grill, Fan Forced, Fan with Grill, etc.
You can see the order by looking at this part picture but is has been discontinued: external link Thanks
Are the images in order from the top then moving clockwise?
Thanks, yes, the zero is the center (4th icon).
We have the 1505TIWH oven. The bottom and fan elements have stopped working. It was working well before. I have checked both elements and I can’t see any damage at all on either element so to me they look good. I have removed and replaced all connectors to ensure good connection but still no joy. The top element works fine and the fan is running plus the light works as well. Any ideas, faulty switches or thermostat maybe?
Hi Bryan, thank you for your question and I'm sorry to hear of this. Based on what you have described it may be the elements themselves that need replacing. If this does not work then you may require a technician to assist and find the cause. Thanks
Hi, the indicator inside the function switch is spinning around, any way I can find out what functions am I using according to the orange light on the button?
It’s TI Turbo Master by the way
My multi function selection knob has faded so I can't select a function
Hi Beth, Thank you for reaching out to us and I'm sorry to hear of this. Here is am image but it might not be very clear. File: https://cdn.productreview.com.au/document/thread-message/0f00c1dc-e6bf-553b-aa30-53a83387624f I have also included the user manual File: https://cdn.productreview.com.au/document/thread-message/42f716d8-b415-56b4-8157-e2c55409eecb Thanks
How do you turn on the oven
Hi Judy, here is a link to the manual, pages 9-11 cover the functions. Make sure the clock is set before use. File: https://cdn.productreview.com.au/document/thread-message/0a300696-8e8e-50e0-b407-f68c590eee5f Thanks
How do u operate the oven
Hi the fan on oven has stopped working.. Is it easy to repair it better to replace
Hi Sonia P, it is recommended that you use a qualified technician to make any repairs. If you would like to see the cost of any parts you may need you can do so by visiting our on-line webshop @ external link . Thanks
Hi my oven fan had stopped working ...1505TIWH. Was wondering if it is easy to get fixed or should I look at a new oven
Hi Sonia P, it is recommended that you use a qualified technician to make any repairs. If you would like to see the cost of any parts you may need you can do so by visiting our on-line webshop @ external link . Thanks
Hi I have a Euromaid 1505TI model and the glass on the inside of the door is starting to come away - can this be resealed or can I purchase a new door. Thank you
Hi Carolyn, Thank you for your question and I'm sorry to hear of this. I will reach out to you directly to get some additional information. Thanks
Hi just bought a house with a euromaid 1505 tioven and the plastic strip inside the dial has disintegrated and I have no idea what function I’m on
Hi Maria, I'm sorry to hear of this. If you could send us your email we can send you the user manual which has the functions. Thanks
Hello, I have a Euromaid 1505 T1 Turbo oven which our tenant reports recently has leaked water afetr cooking. Is this likely to be a door seal or some other problem? Regards, Shaun
Hi Shaun, Thank you for your question. There are a number a reasons why this may occur as the water would be condensation from what is been cooked. If you do find there is nothing wrong with the seal, what is been cooked, time and size I would recommend contacting our service team to try and assist you further. Thanks
Thanks - what is the best contact number for service team?
Thanks Shaun, 1800 444 357
Similar problem. I have a Euromaid 1515TI and the multi function selection strip and it’s clear plastic surround disintegrated. Guessing, as I now had no guide, I thought I had turned the knob to fan force and then an hour later had to apologise to guests as it was on the defrost function. Please help.
Hi Jan, I'm sorry to hear of your situation. If you are looking to replace it you can contact our us on 1800 444 357. If you are looking for a photo of them user keta k has provided a photo to the functions external link . Thanks
Thanks Ruben
Please tell me how to reset the clock on my Euromaid 1505 TI Turbo Master? I live in New Zealand and my email is [Email Removed] Thank you Zelda
Hi Zelda S, the user manual has been sent to your email. Thanks
I have a 1505TI turbo master the knob function has faded please help I dont know which is the grill or the fan force or anything Beth
Hi Beth, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternatively you can email us at customer.care.ha@glendimplex.com.au
Hi Beth We have the same problem as well. For the fix, I printed out the functions that can cut and laminated, and stick around the knob. Here is the photo of it: external link If you need this template to cut and stick please send me your email ID and I will attach the file.
Cheers Rabs
Hi Rabs can you please email the template you made for the dials. I’m guessing and hoping for the best theses days. Email :sue.popp@yahoo.com. Many thanks
hi can you please send me the template also, nikki_nicole1994@hotmail.com
Hey There,
We have just realised our whole oven has stopped working. The knobs don't light up orange when they're on and the display screen doesn't come up. Is there a way to restart the oven?
Hi Timotee, Thank you for reaching out to Euromaid. We are sorry to hear about your experience, Please contact our customer care team on 1800 444 357 with the model number of your oven and they will be able to assist you further. Alternatively you can email us at customer.care.ha@glendimplex.com.au
Hey Timotee, this happened to our oven when the clock stopped working. Our landlord had to replace the clock unit and then the oven started working again. Apparently it's all connected - which is stupid!
The rubber mounting around the outside of the oven itself appears to have detached. Is ii normally glued around the outside face of the oven so when the door closes it creates a seal. jim
Hi Jim, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternatively you can email us at customer.care.ha@glendimplex.com.au
The rubber mounting around the outside of the oven itself appears to have detached. Is ii normally glued around the outside face of the oven so when the door closes it creates a seal.
Hi Jim, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternatively you can email us at customer.care.ha@glendimplex.com.au
Hi Euromaid, I know that 1505T1 is the old model. However, I am after the picture of the knob which helps me to identify which are the functions as it has been all gone because of age.
hi,
please provide your email address and we will do the best to assist :)
Hi Mitch,
I have the same problem, how can I get help?
Thank you
Manon
Hi Manon, Thank you for reaching out to Euromaid, Please contact our customer care team on 1800 444 357 with the model number of your appliance and they will be able to assist you further. Alternatively you can email us at customer.care.ha@glendimplex.com.au
Hi We have the same problem as well. For the fix, I printed out the functions that can cut and laminated, and stick around the knob. Here is the photo of it: external link If you need this template to cut and stick please send me your email ID and I will attach the file.
On a side note, Euromaid service is appalling (as you can see from the replies from Euromaid in this forum, they have offered no solutions at all for any problems mentioned here. They just give a phone number to call or email, but again they offer no solutions. We have tried all of it).
Cheers Rabs
The programming display does not light up at all. The oven turns on and heats up OK.
Hi Bob,
please give us a call so we can walk you through it over the phone, 1800 444 357 :)
I have a 1505TI oven and symbols on the mode control have disintegrated, I purchased a new knob thinking it would come with symbols, it didn't, and I cant get much sense out of the seller as their communication is not good. What are my options as the house is soon to go on the market and I need this issue addressed. Oven works great and no other problems Heather
hi, sorry to hear you are having issues with your knobs. please call through to our parts team so they can discuss the best option for yourself.. 1800 444 357 :)
Parts company where I ordered the new knob have finally communicated with me and are continuing to try and solve the issue. If no help from them I will ring the above number
Hi Happy Customer (I am sure you are not that happy with Euromaid customer service) We have the same problem as well. For the fix, I printed out the functions that can cut and laminated, and stick around the knob. Here is the photo of it:
external link
If you need this template to cut and stick please send me your email ID and I will attach the file.
Cheers Rabs
Hey Keta K. Any chance I could get a copy of the template. Having the same issue with no programs or temperatures
We have a 1505 TI Turbo Master purchased from cabinet maker .
Had never been used still in its box.
Had it installed for 2 months and it seems to have blown the bottom element.
Can we get warranty on the unit ?
Cheers Shane
Hi Shane, it would depend on when the appliance was purchased. Do you have your proof of purchase?
Get an answer from our members and Euromaid representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.