Mistral MACH10 Questions & Answers
Verified
When i pressed the cool button the indicator for cool flashing. Please advise.
Do I empty water out of cooler/ heater,when using as a heater?
Instruction Manual for a Mistral Air Cooler & Heater MACH10. Thanks
where can I get an instruction manual for cooler heater MACA10 kilburni
Where can I obtain an instruction manual for my "Mistral Air Cooler & Heater Model MACA10"
A manual for a mistral maca10 where is it available?
I have been given a Mistral Aircooler & Heater Model MACA10. Where can I obtain an instruction manual on how to operate it Regards Graeme Francis
My mistral mch11/2400 oil heater does not produce heat. I placed all the points on the timer to the center. This timer has a small switch and I placed it in both up and down position.
Where can i get a manual Please
I put water in Mistral cooler/heater but the going out can you tell me about?
How does the cooling section work?
Mistral Mach10. Does the ice/water just go into the top reservoir? Where does it come out? Do you need to empty it?
Hi I have a mistral air cooler and heater I'm just wondering if anyone can tell me why it Cong's out when left on all night?
Looking for a manual for the Mach 10, does anyone who where to find this? Just bought one second hand and don’t want to put water in the wrong spot..
Cheers
How does the Heater work?
I have a Mistral Mach 40 portable evaporative cooler & heater. How do I get the heat function to work?
To use the heat function on the Mistral Mach 40, switch it on with the switch on the side, then press the blue Mode button twice. Then press the bottom middle "Normal Hot" button once for 1000W heating or twice for 2000W heating. It doesn't seem to be able to run heating on any fan setting besides Medium. Once you're done with the heating, you can press the blue Mode button again to allow the appliance to safely cool before switching off.
Mistral mach10 evaporative cooler heater. Cleaning filter...does the whole back panel come off?
Hello Rhondat, It has been a while since I have had this appliance. But from what I remember there are 4 screws holding the back panel on. You need to remove these screws to get to the filter that gets soaked with water. If you are talking about the black filter facing the outside then you only need to take out 1 screw. I hope this helps.
Thank you tony88 will try that!
Mi air cooler & heater is no working. Suddenly did not turn on again. Any ideas?
Sorry, I can't really help you on this. If you have the remote for the machine, you can try and turn it on using the remote. It may mean that the fuse inside the machine has broken and/or the wall power socket you plug the machine into is broken and/or something has broken inside the machine. I do not recommend trying to troubleshoot it unless you are experienced in electricals.
I don't have the remote. Where can I carry it for fix?
What happens to the water if you want to store the machine away?
You will need to drain the water from machine. You can do this by removing a small plug located at the bottom of the machine. Remember to replace this plug once the water has drained out.
Hi
Just bought a second hand mistal heater cooler. Can anyone tell me what the little door on the side is for?
Does water need to go in for the heater - or just the cooler?
Hello Jodi,
The little door on the side would be for water when you use it as a water cooler. When using it as a heater you do not add water to the unit.
Tony
Get an answer from our members and Mistral representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.