Best Ozito Circular Saws

Based on 18 reviews
Brand
Search brand…
Rating

Ozito CMS-1621

Ozito CMS-1621

4.0 
MikeVSA19 posts
 

For the price, this saw performed well. Easy to set up and operate and not heavy to move around. Cuts are clean and the saw has no problem with… Read more

thicker pieces of timber. A couple of downsides - the dust bag is for show only and practically useless and before using the saw, make a couple of practice cuts to ensure the saw is cutting at 90 degrees. The first saw I bought had to be offset by around 8 degrees to get a perfect square cut (even with the saw table offset to the max). I returned this saw to Bunnings and they had no issue to provide a replacement. The new saw still needs to be offset by a couple of degrees but nowhere near as bad as the original saw. I figure this will be an issue with these saws and a result of a low price. 'You get what you pay for' right? The upsides - it's cheap, does what it's supposed to do and has a 3 year warranty. Overall, a positive experience and happy with Ozito.

Ozito 18V PXCSS-165

Ozito 18V PXCSS-165

4.2 
$89.99RRP
grant34 posts
 

Well built machine – This saw is built really well and has enough power for most hobbyists and diyers. I've used it for a number of projects including building a timber… Read more

pergola and as long as you have a decent blade it can handle 45mm thick pine beams, particle board benchtops etc. So far no complaints. Obviously it's going to struggle with hardwoods or a blunt blade so you need to be sensible on how to use it. It'd be great if Ozito made a 36V version.

Ozito CSW-7000

Ozito CSW-7000

4.3 
SamThe2CanTasmania3 posts
 

Good for the price – I'm just a DIY user, but I quickly grew past what this saw could do. The two major issues that hold it back for me are the blade cover getting stuck… Read more

at the start of work, often needing to awkwardly pull it back slightly to get it started Then the power of it, I instantly swapped the default blade to a Irwin Weldtech and was having issue with it getting bogged down.swapped again to a Diablo and still the same issue. Now I am talking about cutting 200x50mm sleepers so it's quite a task for a small saw, but it's still enough to make me look elsewhere now. Besides those two issues it has been great.

Ozito PCR-2100

Ozito PCR-2100

5.0 
DanSA17 posts
 

Great little DIY saw – I've been using this now for 3 years. It has help lay laminate flooring, bamboo flooring, a small tiling job and lots of small jobs in between. The… Read more

saw hasn't missed a beat, it's nice and safe, and it comes with a 3 year warranty. Highly recommended for the DIYer!