Latest review: This is an excellent saw. The detents are accurate. Unlike the Dewalt saw, you cannot alter the detents, but that's only really needed with sliding mitre saws. Mine was assembled in Japan, I think.
Latest review: I bought this unit about ten years ago, did a few cuts and it has remained sitting in the garage for ten years, unused. Now I am getting back into some woodworking projects I went to cut some timber
Latest review: I bought a new model MLT100N in mid-May 2020. Within a few cuts it became apparent that the rip fence is pretty much useless if you accurate, square cuts. Even a little bit of lateral pressure
Latest review: Purcahsed this saw for some home renovations and so far has not missed a beat. Can't relate to the issuses that everyone else has reported. Top quality as far as I am concerned. I do not use this saw
Latest review: On advice from a carpenter friend I set about choosing a small table saw.
I chose the BOSCH 10J because of it's portability and the fence seemed to click into place quite square each time it needed
Latest review: I've no woodworking experience so this is review from a hackers point of view.
I bought this saw.after 1st buying and returning the $200 ozito death machine.
Had a look at the next step up, Ryobi
Latest review: I believe this is one of the most trusted saws in the market. This model was discontinued in 2008-2010 period.
I bought this machine, secondhand, in 2018 from a tradie who had it for severl years
Latest review: I have been using this twin blade saw, may be with enough experience with the tool to provide an opinion. It is 550W counter-rotating blade circular saw (240V). I found that it is very handy to cut
Latest review: Drop saw fits perfectly with supplied stand.
My mitre and angles did not need to be adjusted!
I have already found the blade needs to be upgrades, but for the price, this is an excellent
Latest review: As others have said it’s like a hot knife through butter. Out of the box I used it to rip through about 100lm of 19mm merbau. Easy as. Dust extraction is good & makes it easy to see where you’re goi
Latest review: very good circular saw, i have a couple of other saws but this one is the best one that i always use, it has never failed on me, or had a fualt since i bought mine.
I really like using this saw
Latest review: This is a very good work horse that just keeps delivering. It's well worth the money. It is very accurate when cutting, easy to set up, low vibration and cuts both mitre angles which a lot don't. It
Latest review: Was looking for my first circular saw and did some research, went to different shops and picked up saws and had a look at what was out there from various manufacturers in this size. Have to say I'm
Latest review: This has been an excellent saw and still going strong. It is really of trade quality but I use it for DIY use and so it breezes through everything asked of it. It has plenty of power to slice through
Latest review: I've been using this now for 3 years. It has help lay laminate flooring, bamboo flooring, a small tiling job and lots of small jobs in between. The saw hasn't missed a beat, it's nice and safe, and
Latest review: My saw is five years old. It has heaps of power. The blade has lasted well. The laser is easy to see and accurate. The saw is light. It is easy to adjust. It is slightly limited in depth of cut by
Latest review: This saw is a beast. In the first month I owned it, I demolished 5m of interior wall, cutting through drywall and steel studs like nothing. Felled and cut up five hardwood trees, about 15cm trunks