Ariston LFO3C22 Questions & Answers
Verified
Dishwasher was working perfectly one day and the next day no power at all, power point checked and all good. Just nothing at all when power button pressed, any ideas what might be causing this. Cheers Gary
My Aristón LFO3C22AUS is constantly stopping and beeping at least 10 times during every cycle. No alarm showing and salt is always is fine. Have to keep opening and closing it and restarting it to go. It’s only maybe 2 years old.
Hi Heidi,
Please contact our Warranty Department on 1300 762 219 for further assistance.
Kind Regards,
Ariston Marketing Team
Have just installed dishwasher, following instructions - added salt, have set the water hardness, went to run a program (5) without loading (as per instructions). Machine now displays F1 on the screen is also flashing power light and start/pause light & beeping 10 times. I turned off at power, turned it back on & still does the same.
Hi Jackie, Thanks for contacting us, I have spoken to our technical team and they have advised that you may need to check the height of the water outlet hose min/max as per the install instructions. Please have a look at the below link.
Top of page 3: external link
If you are still having issues please let us know as you may need a warranty job created.
Kind Regards, Ariston Customer Service
Hi, thanks for your quick reply. I googled the heck out of the internet. Tilted the machine 45 degrees, this drained water from the machine on to the floor. This allowed machine to reset. However problem kept recurring. Investigated further & the outlet hose was disconnected inside. Reconnected, and now the machine works. Considering this is brand new, who would have thought??
Hi Jackie,
Great thanks for letting us know, sometimes it can come lose in transit. In the future any issues like this please let us know asap and we will get a technician to come out and inspect the unit.
Kind Regards, Ariston Customer Service
MY dishes don't get rinsed properly
Hi Marilyn,
Please contact our Technical Department on 1300 762 219 to identify the reason your dishes aren't rinsing properly.
Kind Regards,
Ariston Team
My last Ariston - failed at last - had a removable top so the height was reduced to 82cm. Will this one fit in the same space by removing the top? Thanks
Hi Paul,
The height the LFO3C22 dishwasher is 850mm high and does not have a removable top so it wont fit in your current space.
Kind Regards,
Ariston Team
What does 3 short looong, short looong, short loong beeps mean.? When I try to start the machine this beep sequence happens and the machine won't start cycle.
Hi Len W, Thanks for contacting us, are there any lights flashing on the front or any other signals flashing on the front? Its difficult to determine the issue without seeing the dishwasher. It would be best to give Arisit Technical Support a call on 1300 762 219 to see if they can recommend a solution or if they think a technician needs to come out to have a look.
Please let us know how you go!
Thanks
Regards,
Emma
No there are no flashing lights on the front of the display.
Hi Len W, Ok no worries thanks for checking that, I have spoken to our technical team and they think its a door lock issue. It takes 5 mins to fix with no parts necessary. If its under warranty, it’ll need a service call to rectify.
You can reach our warranties team on 1300 762 219 to arrange!
Thanks again
Regards,
Emma
Trying to source an inlet hose for this dishwasher as ours isn’t working. Cleaned inlet filter, though nothing visible in it, still not enough water entering the machine and closed tap symbol/sound coming on. Understand this part isn’t covered under the warranty so where do I purchase one?
Hi Sarah,
No worries, for any parts orders you can purchase via our spare parts team on the number 1300 762 219!
Thanks
Regards,
Emma
We keep getting the cycle interrupted by a 2 tone bip/beep that won't go away. I have made sure the water in and out is okay, salt is topped up and the rinse aid is full. Please help
Hi David,
Please contact our service department on 1300 762 219 for further assistance.
Kind Regards,
Hi I have an LF03C22X dishwasher and got up this morning to find F 3 code beeping every few seconds. I haven't touched it since as I don't know what it is. Can you help please
Hi Ronny, F03 is a drain timeout error. Please check the filter and drain hose to make sure it is not kinked or blocked. Failing that we would need to action a service call for that machine. Please contact our Warranty Department on 1300 762 219 if the filter and drain hose is not blocked or kinked.
Regards,
Thank you
What is the difference between LFF8M122AUS, LFO3C22AUS and LFC2C19 dishwashers? Some sites suggest that the second and third have been discontinued. I'm having difficulty sourcing the first one - which is the only one I can find a number of reviews for.
Hi Phil,
The LFO and LFC models are not discontinued models. You can purchase these in White or Stainless Steel from Harvey Norman, Domayne or Joyce Mayne stores.
However, the LFF model is a run out model.
Discontinued: https://www.productreview.com.au/listings/ariston-lfo3c22-lfo3c22aus-white
Indeed, Harvey Norman don't seem to have any of the "run out" model! (LFF)
How do you get the eco setting back onto each program?
Hi sam, I don't belive that there is an eco setting for each program, there are only a few eco settings.
Hi Frog, Thanks,I only have one now but before I had 3. I changed the temp on a few and I cant seem to get them back now.
Hi Sam, There is only one ECO setting on this dishwasher: Program 1 is ECO 50'C cycle, which has longer duration than other wash cycles but it uses less energy and is less harmful to the environment. It is recommended for normally soiled crockery. Regards
Ok thanks,could have sworn I saw the little green icon. Must have cabin fever,thanks everyone :)
My wash seems to take hours and hours even on auto every day, seems to get stuck on 42 minutes.
I would contact Harvey Norman. That sounds like a fault
Hi Claudia, It is difficult to determine the issue without seeing the dishwasher. It would be best to give Arisit Technical Support a call on 1300 762 219 to see if they can recommend a fix or if they think a technician should come out to have a look. Regards
My unit is coming up with a F12 fault , I’ve turned it of and now it won’t start
Hi Steve, This sounds like a problem with an internal component, but it is difficult to determine the issue without seeing the machine. It would be best to give Arisit Technical Support a call on 1300 762 219 to see if they can send a technician out to have a look. Regards
On setting up the dishwasher in soft water do you need to still add the salt if you have set it to the waterhardness to 1
Hi Esther, We always recommend using regenerative salt, no matter the water hardness. It helps to make the wash more efficient and helps with maintaining the dishwasher. Regards
Thank you also the customer service person i rang today said i didnt have to use the salt but after your answer i may revise that
Why won’t Ariston replace my 5 week old dishwasher that has never dried dishes from the first day? 3 weeks now waiting for one of their service agents to return calls, emails. Why buy a machine with a 5 year warranty when they won’t replace the faulty one? ACCC here I come
Hi Frog, Can you please send us a private message with your details? Alternatively, can you please contact our warranties team on 1300 815 589 so we can assist you with your concerns. Thanks Regards
Hi I just got the LF03c22x and I've connected power, hot water inlet and drainage and 3 mins into any cycle the F11 code continues to appear and dish washer stops! Does anyone know what's going on?
Hi Ales K, This could be an issue with an internal component, such as the pump. It is best to give Arisit Technical Support a call on 1300 762 219 to see if they can send a technician out. Regards
Why on the first run ever, did we have suds ,lots of suds?
I had a few but not many. I ran it empty the first time, as directed. My guess it is whatever oils other production fluids that were washing out
Thanks
Why do I need to add salt? Never hard of this before. I live off a water tank which means softer water. Is this really necessary? If so how much should I use and how often.
The dishwasher has a built in water softener. Once salt is added, you can adjust the serving (see your owners manual) appropriately for your water hardness.
Hi Alan, The option to add salt is mostly directed at European customers with hard water. If you have soft water, then you don't have to add the salt. Regards
Get an answer from our members and Ariston representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.