Miele G 975 PLUS Questions & Answers

Good morning, Thank you for taking the time to reach out to Miele and providing feedback. We are very sorry to hear of your disappointment with your appliance. We would like the opportunity to try and resolve this with you. If possible, can you email your full name, the state you reside in and your best contact number to prsupport@miele.com.au and a member of our team will be in contact as soon as possible. Please reference your full Product Review username. Kind regards, Daniel

Hi Daniel not sure what has happened but my dishwasher is now working.

Good Morning Friends G, As you reside in Belgium, I would recommend that you reach out to them directly via their Website: external link . Kind Regards Daniel

Hi Daniel, Do you have any idea how to find equivalent model for g 975 sci. I am looking for correct measurements and I think it is 60 cm * 84.5 because dush washer is tucked in to the wooden frame difficult to measure it. One of them from Belgium office visited and he said I should look for 'sci plus' but models online or in stores doesn't directly carry this..he offered to repair at a cost of 300 eur so anything around 800 should an option to replace. Write to me if we can work out something - Bala

Please use the following website link and click on the download tab marked "Product Details" for all measurements. external link 

I don't know if this will help any but I have the same model. It would open the inlet valve, fill for about 5 sec before stopping and flashing the "Inlet/Drain" light. it will then wait before opening the inlet valve again and it would repeat. it turned out that the fill sensor was faulty. I smacked it with the back of a screw driver which will make it work for a few days. The fill sensor is located on the right side of the machine behind the panel. its located in the large plastic water control tank thing that runs up the side of the machine. its a small board on the lower left of that large tank just above where all the hoses come into the bottom of it.

Hi Johnny, if you contact us on 1300 464 353 we will be able to assist you with fixing this. Kind regards, Anna.

The salt light comes on when your dishwasher needs more salt. Fill the dispenser and see if that helps

Hi Phillip Thank you for your question. Please refer to your Operating Instructions. THey can be found here: external link  If the problem persists, we recommend you book a service call. You can do so by calling 1300 464 353 or making a service booking here external link 

Kind regards, Anna

I have not had this problem with my G975 Plus, so I would not be in a position to advise. The fan does have an open/close shutter on it but that does not operate continuously to cause such a noise. The fan should be a relatively easy unit to replace and should be an available spare from Miele.

No I always had to get the Miele man in to fix it, it was always the tube blocked but they have to remove the inside door cover to so it!

as I suspect, there is something, a shutter partialy opening may be causing the noise, probably has some calcite in it, watch this space for future info as there seems to be no other.

regards Rob.L

You can access the tube by removing the front cover. Remove the tube and clean inside it. If you are half handy it is simple.

I never had this problem.