NEC NW452 Questions & Answers
Where is the water filter located please..
Our motorhome washing machine won’t go past 26 minutes have checked the drainage and filter not blocked goes on to E1
What is the le alarm
Everything is working but the water is draining straight out instead of filling the tub! I have cleaned the filter in the back and there’s no blockage. Help please!
Hi Mel, because this model is discontinued I don't know who you could contact, but it sounds like you will need a washing machine service! As i never had this problem with my machine I'm sorry I can't help, but good luck
Hi I can't get a new PCB assembly for my old NEC NW-752. Would the same part from NW-452 Be interchangeable looks same but 752 is 7kg wash and 452 is 4kg wash. Thanks in advance
We own one of these nec nw452 it keeps coming up with LE we have restarted machine but within about 30 seconds the LE is back how can we fix this machine over 15 years old
Its a lid error showing up. When lid closes a magnet activates the cycle. Place a magnet on the right hand side near the front also check lid is closing properly
My machine won't spin. The agitator is working but the bowl isn't spinning therefore the clothes are still wet. Has anyone had this problem?
Check machine is level, can adjust feet. Also place items to be washed evenly around tub so they don't create an unbalanced bulk inside machine when washing.
My machine is coming up with an E9 error. It's just been given to me and after set up shows this error any help would be appreciated
external link
My NEC died recently, bought a Simpson, hate it! Wish NEC still made these, I loved my machine!
Sounds like a sensor problem....
What it mean LE in the instruction panel The machine stop working
Lid error. Lift lid and see if anything caught. From memory the right side is magnetic near the front on the plastic. If you have a magnet place where described and see if machine starts working. If it does you may have lost the magnet off lid.
the same as a lot of others - it has sprung a leak!!!!!!
I love my NEC fuzzy - around 15 years old and WAS still going strong until yesterday until it started leaking from underneath. I managed to turn it sideways and the leak seems to be from a thin plastic pipe. I can't see where it's coming from but have an image if there's any NEC fuzzy gurus out there. I can afford a new one - but I would love to fix my fuzzy as I hate throwing things away.
Why won't the water cut off
Usually the inlet valve about $45 on eBay I’d dose have 240 volt wires connected to it so should be replaced by a technician
How do i start a load of washing?
hi thanks for your query, I have included a link which will take you to the user manual. external link . Press the power button, then is you want fuzzy logic wash just press the start button, the machine will automatically sense the weight and adjust accordingly. You should be able to download or print the pages you need. Hope this helps you.
Here is another link that you can download or external link
I have a NEC fuzzy logic NW 452 auto washing machine, it keeps loosing water out the drainage pipe while it's filling, the pump works fine as everything else dose. Do I need to replace the pump or is there a simple fix to this issue?
unscrew the filter on the back of the machine, it may be blocked, once the filter is out you can reach in with your fingers to check, i had a five cent piece causing the pump to keep draining.
My washing machine is leak water under the bitten when filling, any idea why?
Hi I have had mine for years 14 now it seems to leak water on I think rinse & spin cycle not when washing or filling not sure if Its worth getting it looked at since its so old I just cant find one that's the same size as this
anyone help
The outlet tube cracks and causes leaks. I found the crack and taped it with water proof tape. No problem since.
You could replace the outlet / drainage pipe from another washing machine they all have the same size outlet connection.
I found the internal seal goes on the taps. I've replaced two sets so far.
NEC no longer supports the machine anymore, so replacement taps are difficult to source.
Is it ment to agitate when washing clothes
I think so, but haven't used it for some time as we upgraded to a bigger machine.
Nec washing machine nw452 lid locked won't operate can it be fixed or parts to buy thank you? ...pauline granny48@hotmail.com
Hi Pauline, hopefully your problem has been resolved. if you are still looking for help, I used Sav On Service in Sydney to replace my water pump just before Christmas last year. I have my NEC 4.5 Kg for 10 years now. Maybe the repair guy could find the right parts for you. NEC left Australia back in 2009 I just found out recently.
I have a nec nw 452 washing machine, it keeps giving me the le sign and wont spin. have checked the level of mach - ok does not wobble, checked that i did not over load, sign even comes up on empty(no clothes but water filled ) wash , it does not want to spin. any ideas please?
I have this machine for 10 years now and used the speedy wash (24mins) 99% of the time. Does the water empty well before the spin? I ask because I had the water pump replaced last year.
Get an answer from our members
Extra Information
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.