AEG F77000M0P / F77000W0P Questions & Answers
VerifiedJust wondering why our 12 month old dishwasher leaks drying aid out of the bottom of the door
Check the black seal is pressed into its channel properly
Why does the 50 minute cycle take 57 minutes?
Our AEG dishwasher ( model F77000W0P) has developed a leak coming from L door above hinge. I replaced the door seal , made no difference. The leak generally shows up at the end of the cycle. Any suggestions…. I am worried if I call a serviceman I will be up for $$$
Please contact AEG on 1300363664 to discuss.
My fault rectification: lower spray arm assy found with 1 inch crack on under side. Mine done the same thing. Replaced both door seals and still leaking. Whilst testing with the outer door skin removed I noted that a lot of water was getting around the seals. After opening and investigating I found that the lower spray arm had a 1 inch crack in the plastic. This crack was spraying high pressure water down into the sump (instead of up) causing a wave within the water in the sump which the seals could not cope with. Super glued it up for now (parts on order) and no more leaks.
What is error message 20
I20 Error is not draining. Please call us direct as we will need to troubleshoot.
Has anyone had an error i30 successfully fixed? If so, how long did it take and how much did it cost?
Hi,
I have the model F77000M0P. It started to give error 30 and then 40. I cleaned the bottom area by removing all water but the issue persists. What can I do in this case?
Thanks
John
Hi John, in my experience you now met call for a service agent to come, decide that they need to order a part, wait another 3 weeks or so, have them come out to fix and tell you to stop using most of the functions of the heap of garbage dishwasher. We ended up buying a very inexpensive Bosch and absolutely love it
Hi John,
Leeanne from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Leeanne?
We look forward to hearing from you soon.
Thanks
Leeanne
I continue getting error message i20 even though I have cleaned filters and check for kinks in hoses. I would like to drain water from machine if possible and check outlet hose for internal blockage - how do you drain machine and take outlet hose off to either unblock it or replace it ??
Hi Hans. Ben from AEG here. We would love the opportunity to discuss the concerns you have raised with you. Can you please email me your contact details at customercare@aegaustralia.com.au attention Ben I look forward to hearing from you soon.
Thanks
Ben.
I have error code 30 on my aeg f77000mop and sometimes the water comes out from underneath. Is it easy to fix?
Hi Wayne,
Angela from AEG here.
We will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Angela?
We look forward to hearing from you soon.
Thanks
Angela
My 2 year old old AEG F88009MOP has come up with i20 message. We have checked the hoses and filters and drained the water in the bottom. We now cannot get it to start a new cycle. The timer on any load goes down with no water going in (yes taps are on) then the error message reappears. Please any help?
Hi Saj,
Leeanne from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Leeanne?
We look forward to hearing from you soon.
Thanks
Leeanne
My 4 mth old AEG 77000 has come up with i20 message. We have checked the hoses and filters and drained the water in the bottom. We now cannot get it to refill or start a new cycle. The timer on any load goes down with no water going in (yes taps are on) then the error message reappears. Please any help?
Hi V Kelly,
Leeanne from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Leeanne?
We look forward to hearing from you soon.
Thanks
Leeanne
We have just installed the 77000 dishwasher after waiting for house to be finished used it for the first time last night and the control panel got very hot mid cycle is this normal?
Hi Chris Michelle from AEG here. AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Michelle R We look forward to hearing from you soon.
Thanks
Michelle Rayner
AEG Official Hi Chris Leeanne from AEG here. AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Leeanne We look forward to hearing from you soon.
Thanks
Leeanne
Is there an easy way of removing an error 30?
Does this require a technician to fix and if so what would be the approximate cost to repair?
Hello Tina! In the Questions and Answers section, someone asked a similar question, and the answer came back from an AEG technician. "AEG will be able to assist you with this query. Can you please email me your contact details at customercare@electrolux.com.au." Hope you can get it sorted soon.
How can I reset my machine when it says error 20?
I have washe and cleaned filters
Hi Bett.
Ben from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@electrolux.com.au attention Ben?
We look forward to hearing from you soon.
Thanks
Ben.
Hi Bett,
I have no idea but I'm sure AEG will help.
Yours
Alain
How do I remove the drain hose from the machine in order to replace it? It goes thru a 'nylon' grommet thru a black plastic panel on the bottom rear of the dishwasher. How do I get to the connection of the hose to the drain pump? Thank you.
Hi, Marina from AEG here. AEG will be able to assist you with this query with your AEG F77000MOP. Can you please email me your contact details at customercare@aegaustralia.com.au attention Marina. We look forward to hearing from you soon.
Thanks
Marina
The dishwasher has been playing up - will not completely wash through and then it starts flashing "i30" but the i does not have a dot on top. Does anyone know what this means?
Hi mine is doing the same did you get an answer.
Error 20 keeps coming up on my almost new dishwasher f77000m0p and despite cleaning the drains I can not restart it, error 20 returns, so How do I cancel a cycle half way through?
Hi C Tremblay,
Leila from AEG here.
We are sorry to hear you are experiencing problems with your AEG appliance. If you wish to discuss this further please feel free to contact Leila at customercare@aegaustralia.com.au
Thanks
Leila
I wanted to buy this AEG dishwasher but AEG wouldn't deliver it to my home. They deliver to every suberb that has my post code except mine even thou the deliver to the suberb before and the one after me. I'm in 3064.
Sorry Zaid cannot answer your question I live in NSW. I live in an area far away from any major shopping centre and also not able to have delivery by AEG. My dishwasher was delivered by Harvey Norman in Nowra for $40, this store is 180Km from where I live , I was very impressed with their service, We had our local plumber install the machine. I am very impressed with my AEG dishwasher, all I can say make your delivery happen the best way that you can, I think that you will be happy at the end of the day with your purchase.
How do I install my AEF favorite 77000. I can't get the T piece of the pluming hose to fit through the hole in my cupboard? My previous dishwasher hose did not have the bigger piece on the end and easily fitted through the hole.
Hi DiseyA,
Angela from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Angela?
We look forward to hearing from you soon.
Thanks
Angela
I am considering buying a AEG dishwasher, live in a small village on South coast NSW. What kind of service can I expect, will I get free delivery, installation, then removal of old dishwasher. My nearest HN store is Batemans Bay
Hi Doreen, Angela from AEG here. AEG will be able to assist you with this query. Can you please email me your contact details, including postcode, at customercare@aegaustralia.com.au attention Angela? We look forward to hearing from you soon.
Thanks
Angela
We have just installed our AEG dishwasher and can't open the door! What's the trick to opening?
Hi Ms Campbell,
Angela from AEG here.
AEG will be able to assist you with this query. Can you please email me your contact details at customercare@aegaustralia.com.au attention Angela?
We look forward to hearing from you soon.
Thanks
Angela
AEG why don't you ever respond to people's query on here so everyone can benefit from the response?
Get an answer from our members and AEG representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.