Asko D5434SS / D5434WH Questions & Answers
Verified
Asko problème F10 enlever eau de la panne semble pas avoir de fuite mais la pompe ne cesse pas de fonctionné et toujours inscrit F10 reset mais le problème est encore là peut être un sensor sale???
Hi.
This is the Productreview.com.au This is the Australian site. Regards Claire
Have there been any issues with the ASKO D5343 model DISHWASHERS
Yes. Replaced it after four years - something to do with part availability. Would never buy another.
How to replace the handle cover ?
How do I replace the lower door seal (part number 1870443) on my Asko D5434? Thanks
Hi, My Asko D5434 is 8 years old and has worked perfectly until now. When started, the machine runs for a couple of minutes then I get an "F:12" warning display. The manual tells me to check the water supply which I have done and it is ok, but still the F:12 display. Any ideas?
your lucky yours lasted that long; mine was six months out of my four year extended warranty when I had that problem but they didn’t have the parts so I had to buy a new machine. Wasn’t happy especially when I had to pay for electrician and then a plumber to come and have a look.
My d543433 dishwasher intermittently restarts after it finishes a cycle. It then runs the cycle again. The main pcb was replaced in 2016. Is this the end of life for this dishwasher? I don't really want to pay a high repair bill if it is better to buy a new dishwasher. The last repair cost $500 so I imagine it would be more than that now.
I have unscrewed the door to replace a broken handle,however at the top centre of the door , it does not want to release
OK..there is a small yellow plastic piece of our dishwasher model D5434 which has fallen out of the wall of dishwasher...Having trouble re inserting it.... Any ideas & or advice would be appreciated.
ASKO D5453SS We can't change the program, it is stuck. The machine is working. Have tried holding down the on/off button for 5 seconds or longer, when turned back on it returns to the same program and can't be changed. How do you reset it?
Is dishwasher is a dud mind only lasted for years. Problems with the program settings with the water the list is endless
We have the plummets here installing new DFI643 and we can’t even open the door the display only stays on for a second then nothing lights up.
That Model is crap sorry
I have an Asko dishwasher D5434 bought in 2014. The program selection will not stay at the selected program and instead of starting the program selection just goes from one to the other. What can be wrong?
I’ve never had that problem but I did have a problem with the pump and I’m lucky that my floor didn’t flood my friends Asko dishwasher did. Very disappointed Genesco it’s a dud I got a new one anAriston
Sorry I meant very disappointed with Asko
Hi, I have an ASKO D3121 and the top arm keeps falling off mid wash. I am not sure what part I need to get to fix it. Any advice appreciated
HI , I have an d5434ss model of the also dishwasher and recently the yellow drain plug thing fell out and I can not get it back in anyone have any tips ive been trying for hours
Yer it just clips in
Hi everyone. Display panel says door not open enough...even with door fully open. Is there a sensor to wipe or another fix?
Did you find a solution to this problem?
Nope
Damn... Did you just have to get a new dishwasher or go without?
Have you turned off the power at the wall? To reset?
Hi DBH i had the same problem with my asko integrated dishwasher showing the the door not open enough symbol on the display panel. it was open heaps. I read this post and turned the power of and then on. Thank god it fixed it. I already had the entire intergrated display panel changed for a new one a few years ago when it buggered up. i heard they don't make them integrated like this anymore due to them stuffing up constatntly. thanks DBH for your post you just saved me alot.
Inlet valve leakage sign but no sign of a leak???
The press in part in my dishwasher dont go back so i cant press it Open what do i do?
Where and how to put the different wires back after having removed the door?
Model is just listed as D5434 - I turned it on a few hours ago and have come back to find that it thinks it has 1min left and is still washing. I tried holding down the start/stop button for 3sec to reset but that just changed the display to End but it kept going. Turning it off then on again seems to have restarted it (normal cycle is 1hr58) but I now don’t know if it’s just going to run all night?
I have a d5424 and the touch panel comes on but when you touch it it won't respond. The machine comes on but won't turn off it just says 1 minute at the end.any help would be good.
Unable to help sorry. Sounds like an electrical fault.
Do you think it could be the control panel?
Any update on what was wrong? Having the exact same issue...
Paul, did you ever receive an answer to your issue with you ASKO D5434, my machine started doing exactly the same thing last night
Hi marg to resolve this issue if the pump has any small object in it they have to be flushed out. Use a garden hose to flush from the dump hose . Turn hose on full and it will dislodge any small objects i had a small piece of plastic in my pump.. or you will have to replace the pump.
I have the asko d5644, the child lock is on, how do I turn it off? The manual tells you how to turn it on and how to temporarily deactivate it but not how to turn it off
Sorry I cannot help as I have never used child lock.
Get an answer from our members and Asko representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.