Dishlex DSF6205W / DSF6205X Questions

Sue4y · DSF6205W / DSF6205X

Umm having problems with my dishlex sounds like a sucking noise from the drain but go to press start and it’s just sucking have to turn it off at the wall then wen turned on still that sucking noise done it the other day and I managed to get it to start but now it’s not happening

Dishlex DM 4y

Hi Sue Vivian from Electrolux here. We would appreciate the opportunity to discuss the concerns you have raised about the Dishwaher. If you wish to discuss this further please feel free to contact us on 1300 365 305 and quote reference 4860190.

Thanks,

Vivian

Neil S5y · DSF6205W / DSF6205X

DSF6305W - How come the washing programs are way longer than those stated in the manual? All of my programs are coming up with over 2.00 hours run time.

Duration (min) Energy (kWh) Water (l) 2) Normal soil Crockery and cutlery • Prewash • Wash 50 °C • Rinses • Dry 128 0.75 10.3 3) All Crockery, cutlery, pots and pans • Prewash • Wash from 45 °C to 70 °C • Rinses • Dry 40 - 150 0.6 - 1.4 7 - 12 Heavy soil Crockery, cutlery, pots and pans • Prewash • Wash 70 °C • Rinses • Dry 130 - 150 1.3 - 1.5 13 - 15 4) Fresh soil Crockery and cutlery • Wash 60 °C • Rinse 30 0.9 9 5) All • Prewash 14 0.1 4

Tali7y · DSF6205W / DSF6205X

Ours is leaking from the bottom. Anyone know what might be causing this?

Please advise 7y

this is a new one. No sorry, but we had so many problems with this brand and no help from the company. We ended up getting rid of it for a better brand and better customer service. I suggest you do the same

Dishlex DM 7y

Hi Tali, Zaida from Electrolux here. We would appreciate the opportunity to discuss the concerns you have raised about your appliance. If you wish to discuss this further please feel free to contact us at customercare@electrolux.com.au reference ticket 1016973. Thanks.

Matt8y · DSF6205X (Stainless)

Hi, my dishlex has just stopped working and sounds like it is constantly sucking water, even when turned off on the panel, only way it will stop is to turn it off at the wall, any ideas?

Please advise 8y

Hi, I have the same thing. What setting does it do it on? If it is on the quick setting, turn off at the power point, pull the plug. Turn the knob to the top setting. It should work on this setting. For some reason, the quick setting on these models crap out. Hope this helps, let me know.

Thanx

Sarah D8y · DSF6205W (White)

What does error no 40 mean?

Tom Mace10y · DSF6205X (Stainless)

When you open the door half way through a cycle should the bottom of the dishwasher be 2cm of water? I'm not sure if that's normal . I notice after a full wash there is some water at the bottom too. I may have a drainage issue I'm not sure

Ben b 10y

Hi Tom,

I can't remember noting how much water there was half way through the cycle. I know that there is often water in the filter after a cycle though.

Susan Simmons10y · DSF6205X (Stainless)

DSF6305W - How come the washing programs are way longer than those stated in the manual? All of my programs are coming up with over 2.00 hours run time.

Duration

(min)

Energy

(kWh)

Water

(l)

2) Normal soil

Crockery and

cutlery

• Prewash

• Wash 50 °C

• Rinses

• Dry

128 0.75 10.3

3) All

Crockery, cutlery,

pots and

pans

• Prewash

• Wash from 45 °C

to 70 °C

• Rinses

• Dry

40 - 150 0.6 - 1.4 7 - 12

Heavy soil

Crockery, cutlery,

pots and

pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

130 - 150 1.3 - 1.5 13 - 15

4) Fresh soil

Crockery and

cutlery

• Wash 60 °C

• Rinse

30 0.9 9

5) All • Prewash 14 0.1 4

Shirty 10y

Beats me !!

Mary 10y

I'm just a customer. You'll need to ask dishlex that question.

trev10y · DSF6205W (White)

Can I buy a new top lid?

Mary 10y

I don't know but I don't see why not.

Liss10y · DSF6205W (White)

When do you know how much rinse aid to put in, my rinse aid light has never come on and sometimes the classes have some white on them. I don't use too much detergent but my old model dishlex used to have a window that went clear when you needed to put in more rinse aid. Also what is the best setting to have the rinse aid on from 1- 5.