2 reviews
- See all
- +3
Extensive scratching across 70.2 m² of polished hardwood after upgrading to the Dreame X60 Ultra. Our previous Dreame L50 Ultra cleaned our polished hardwood floors for months without leaving a mark. That gave us the confidence to spend $2,299 on the top-of-the-line X60 Ultra, which we bought directly from Dreame Australia on 1 July 2026. After we upgraded, we found long, straight scratches across 70.2 m² of previously pristine hardwood. The scratches followed the robot’s paths and crossed where it had travelled back over the same area. The attached photos show the extent of the damage.
We’d had our upstairs floors professionally sanded and refinished in 2020. At the time, our flooring professional told us the timber had only one or two sandings left. We don’t wear shoes on these floors, and we’d taken particular care of them ever since. The professional who inspected the damage described it as “incredible and devastating” that a machine this expensive could cause such extensive scratching. Even after we repair the floors, we’ll have lost one of the few sandings our timber had left.
We stopped using the X60 Ultra as soon as we discovered the scratches. We checked the wheels, rollers, brushes and mop assemblies and found no grit or debris. We notified Dreame on 23 August and supplied photographs and video.
Dreame inspected our robot and refunded the $2,299 purchase price in September. Its engineer recorded two failed checks: one for the fit of the roller brush cover and another for whether the roller brush motor assembly lifted and lowered normally. During the lowering test, the engineer saw the cover touch the floor. The contact area matched the location and shape of scratches already on the cover. A separate three-run test on a simulated wooden floor received a pass.
The engineer attributed our floor scratching primarily to an incorrectly fitted cover and said we had fitted it incorrectly. We dispute that conclusion. Neither of us had opened, removed or adjusted the cover before we found the scratches. We didn’t even know how to open it. Only after discovering the damage did we look up how to remove the cover to check for debris. We filmed the process and found none. Our timestamped search history and video document that sequence.
In its final response on 5 November, Dreame said it couldn’t establish a definitive link between the robot and our floor damage because the cover had been removed and reinstalled before its inspection.
Dreame’s own US website recommends the X60 Ultra for picking up dog hair on hardwood floors. Its guidance for two other models, the Aqua 10 Ultra Roller Complete and Aqua 10 Roller, warns that an incorrectly fitted brush guard can scrape the floor. We found no equivalent brush guard warning in the X60 Ultra documentation we reviewed.
We asked Dreame to cover the $5,747.86 quoted for sanding and refinishing alone. We were prepared to settle for that amount, even though the repairs will also require a crane to move furniture out of our second floor, storage while the work takes place, and a week’s accommodation for our family. Including those expenses, we estimate our total costs at $15,000 or more.
Dreame’s final offer was $2,000 as a goodwill payment to settle the entire flooring claim. That covers less than 35% of the refinishing quote alone and less than 14% of our estimated total costs. We declined. We intend to lodge a complaint with the Queensland Office of Fair Trading and report our experience to the ACCC. If the matter remains unresolved, we intend to pursue compensation through QCAT or the Queensland Magistrates Court, as appropriate.
I’ve given one star because it’s the lowest rating available. My only reason for posting this review is to warn other buyers. If you have polished timber floors, I’d urge you to use extreme caution before running a Dreame X60 Ultra on them. I wish someone had warned us before our high-quality hardwood floors suffered this much damage.
Purchased in for $2,299.
- Floor Type: Wood
- System Errors: Occasionally
Dreame Technology, we understand your position. What remains unanswered is how you reconcile it with your own technician’s findings.
Your inspection recorded two failed checks: 1. The correct fitting of the roller brush cover. 2. The normal lifting and lowering of the roller brush motor assembly. During testing, your technician observed the cover contacting the floor at an area matching the existing scrape marks on the cover. Your engineer attributed the floor scratching primarily to incorrect cover installation. We dispute the allegation that we caused this. We first opened the cover after discovering the damage, and our timestamped search history and video document that sequence.
Your own guidance for the Aqua 10 Ultra Roller Complete and Aqua 10 Roller acknowledges that an incorrectly fitted brush guard can scrape the floor. That concerns the same type of component implicated in our robot’s inspection. We found no equivalent warning in the X60 Ultra documentation we reviewed.
Australian Consumer Law provides for compensation for reasonably foreseeable damage caused by a failure to meet consumer guarantees, in addition to a product refund. We maintain that our flooring damage falls within those protections. Refunding the robot does not resolve the damaged floors.
We asked you to cover the $5,747.86 sanding and refinishing quote alone. Your $2,000 full and final settlement offer covers just 34.8% of the quoted repair cost and approximately 13.3% or less of our estimated total losses of $15,000 or more.
We remain willing to resolve this directly through payment of the quoted refinishing cost. Otherwise, we intend to pursue our complaint through Queensland Fair Trading, report our experience to the ACCC and seek compensation through the appropriate court or tribunal. Your internal decision does not determine our rights under Australian Consumer Law.
Hello Belinda, thank you for your further response. We acknowledge your continued concerns regarding the inspection findings and outstanding flooring claim.
As our team has already communicated its assessment and final position, we kindly ask that any further correspondence regarding this matter be directed to customercare@dreame.com.au, referencing order SUB-DRM51984, so the relevant team can address any further enquiries through the existing case.
Thank you for your understanding.
I am obsessed with the Dreame Products. I upgraded to the X60 ultra from a Ecovacs robot. My Dreame vacuums dog hair up flawelessly and mop the floors without missing a spot. It even vacuums my doormats! I would highly recommend this machine, especially if you have dogs!
Purchased at Harvey Norman.
- Floor Type: Tiles and Wood
- System Errors: Never
Hi Marie! Thank you so much for sharing your experience! We're thrilled to hear you're loving your X60 Ultra and that it's been such a great upgrade. It's wonderful to know it's handling your dog's hair with ease, mopping thoroughly, and even taking care of your doormats! ✨
We really appreciate your recommendation and thank you for choosing Dreame! Enjoy your spotless home!
Hello Belinda, thank you for taking the time to provide this additional update and explain your concerns about the floor damage associated with your Dreame X60 Ultra.
Following our investigation and assessment of your case, our team shared its findings and final decision with you on 20 October 2026. We understand that you may still have concerns about the outcome. However, as previously advised, the assessment and decision were finalized after reviewing the available information.
If you need further clarification or would like to discuss the matter, please contact our team at customercare@dreame.com.au and reference order SUB-DRM51984. The relevant team will review your enquiry and provide any further assistance available.
Thank you for your time and understanding.