Euromaid E14DWX Questions

Trevor L.9mo

wine glass symbol flashes on final rinse cycle

Euromaid DM 9mo

Good morning, Trevor. Thank you for your enquiry. You may possibly require a service call. If you can please provide your email address, I can contact you to get some further information. Thank you Sharron

Debbie P.3y

I had similar prob beeping…How do I drain the water from bottom of dishwasher… is it fixable

Euromaid DM 3y

Hi Debbie, thank you for reaching out to us. If an overflow has occurred yes it is fixable. To remove the water manually you my need to tilt the washing machine forward and if water remains it will drain out (please note that you will need something to soak up the water). Thanks

Jess P3y

Good morning, My Euromaid dishwasher was making loud noises for the last few nights before it leaked into the kitchen. Have tried contacting customer care with no response.

Euromaid DM 3y

Hi Jess, I'm sorry to hear of this. I will reach out to you directly to get some additional information. Thanks

Flickity N.3y

Hi, is there an over ride for the rinse aid function? Thanks

Euromaid DM 3y

Hello, Thank you for your question. There is no override but it can be adjusted, see below: File: https://cdn.productreview.com.au/document/thread-message/39eea84a-f248-5a71-bbf6-d188fca5ef00 Thanks

Howard B.3y

My 14 month old Euromaid E14DWX has developed a problem with no obvious cause. When powering on the machine, the mode jumps to "glassware" with its indicator flashing frequently, together with a beep that continues for 30 seconds. The "pause" indicator red heat light also illuminates. The machine is making pumping noises, but there is no water in the machine and no external leaks. What can be done to make it work properly again?

Euromaid DM 3y

Hi Howard, thank you for your question and I'm sorry to hear of this. Based on what you have described it sounds like it might have been flooded, there might be water at the base that needs to be removed or might have dried up by now so try again. Please let us know how you go. Thanks

Trent S. 2y

I have the exact same problem. It is still doing it. What can I do?

Howard B. 2y

The "hi-tech" solution is to get some towels on the floor, unplug the dishwasher and, with the door closed, just tilt the dishwasher forwards. Water from a tray in the base of the dishwasher will poor onto the floor. When it stops, just plug everything back in and the washer will work again - until the next time the problem recurs... You can also just wait some days or weeks until the water evaporates, but then what is the point of having a dishwasher?!