Ezidri Snackmaker Drier Questions & Answers

My Ezidri FD 1000 digital worked well the first time I used it to dry citrus...since then it drops temperature to 30.1 Degrees after about an hour. Cannot change the temperature settings to increase to 55 deg...cannot change the time either. Great product if only it worked ans advertised. DO NOT BUY THIS PRODUCT. Reading other responses it is obvious that I just wasted $400 AU on an item that does not have a manufacturers back-up.

I am using my new Ezidri FD 1000 for the first time today to dry fruit. Set the temperature to 55 degrees but every hour or two it reduces to 30. I reset it each time but this seems wrong. Help please?

I got a unit of Ultra FD1000 from one seller in Melbourne last year at EBAY. When I started using it , I could not adjust the timer. This morning the off/on button didnt work, so were the temperature and timer. Pls advise what could have happened. TQ

I recently purchased the Ezidri snackmaker FD500 digital. Everything went well until I tried to take the dried peas corn and carrots out. They dropped into the middle when taking the mesh off and now I cannot get them out. I have tried shaking it upside down but I think it will happen again. I think I would like a refund!

Can I put the racks in to a dishwasher for cleaning

how did it dry raw meat and fish? please give thickness of meat and the duration of time to finish plus the type of meat.

Hi everyone hope you are all well can somebody help me with the electrical connections for a PCB to fit an 2006 fd500 (6 connections) Regards Jim Lennox Head

What size are the trays

Hi my ezidri snack Maker will not change temperature it is on low dose anyone know why this might be I am in the NT is there a service agent hear thank you in advance

I bought this model years ago and it's been sitting unused for a long time, but I want to get into making tempeh and using this as an incubator. I've got my first batch going, and have just taken its temperature and found it's sitting at 38C after a few hours on the Low setting, which is 6–8 degrees too high and could kill the spores. Is it okay to leave the lid ajar or off to lessen the temperature? Or is there some other way? Put all the racks on and have the tempeh at the top?

Hello, I have used my Ezidri FD500 for 8 years but the machine got very (!) hot and stopped working today. What could have gone wrong? Is there any way of fixing it? Thanks.

Hi Has anyone had success with yogurt? The recipe book suggests 5 hours at 115 f but all we get is liquid with a skin on top!

I have a Hydraflow Ezidri FD1000 It is 10 years old is it worth getting fixed? The temperature does not work and it sparked Judy

Im having problem s trying to separate the fan blade off the motor shaft to replace the element /fuse unit any suggestions?? Mark

I have a harvest Maid FD 1000. We have had it for about 25 years but have only used it once or twice. I have a lot of apricots this year and thought I would give it a try again. it was not working so I checked and replaced the thermal fuse. it worked for about two hours then stopped again. the base was very hot. I replaced the thermal fuse again and when I switched it on I had trouble getting the fan to operate. A bit of prodding and it went ok. It stopped in 10 minutes. The base was hot so the heater works. I immediately switched it off. Can you lubricate the fan shaft. I suspect the motor or fan is not operating well. Should the fan be stiff to move. Any suggestions?.

Brenton Location Bendigo

Does anyone know what is the thermostat heating / cooling cycle time please? ie how often will the element come on to heat the air?

Im thinking thecthermal fuse has blown in my unit but have metered what i think is the fuse at the top of the pcb and seems blown but im not convinced 100% that its the fuse im testing . The unit will not show any sighn of working now for an unknown reason

What parts are dishwasher safe?

my fan has stopped working. Am i able to replace this fan and if so at what cost

I have inherited an Ezidri Snackmaker FD500 and I'm super excited to try it out... but I didn't get an instruction manual. Please help!!