Mazda BT-50 TF Dual Cab Automatic 4x4 XTR Pickup (2020-2026) Questions & Answers

I drive a 2025 Bt50 XTR, and randomly it keeps beeping. It’s not the speed limit reminder as I’ve turned that off. It can vary from 2 mins apart to 20 mins apart. It’s very annoying, it happens both when Apple CarPlay is connected and when disconnected. Anyone had this problem and know how to fix/turn it off?

I have a October 2020 build Mazda bt50 xtr 4x4 and have looked over the vehicle for any warranty issues and found on the passenger side of the chassis some writing from factory near the weld and the weld looks like it has a hair line fracture. It has two welds side by side and is completely different to every other weld on the chassis. Some of the wording is Q13L then some is missing then goes 04 then about 500 ml further says 9 I did some research and the Q stands for Quality and the L stands for layer or layers. So I have presumed that the quality control person has found a problem with the weld from the robot and ours was chassis number 9 with the same problem but was forgotten about and not fixed on the assembly line. There is a lot of other problems and had many parts replaced under warranty many times but now they won’t even book it in for a service and do any warranty work as it is still under warranty and Mazda Australia keeps telling me to see the dealer who won’t help and the next dealer is a long way away. Has any one had a chassis issue in the middle passenger side just under the front door. So a weld that looks like it has two welds side by side and ours has a crack in the middle.

Why would a new 2024 xtr have on the dash 9klm:L then after 5 days say 10.7 with on charge in load just reached 1000 klms

Why is the fuel consumption so bad on a BT-50 Freestyle cab with an aluminium body? I only get approximately 700 kms before i need to refuel, average speed is less than 100 kms/hr.