Westinghouse WSF6606 Series Questions & Answers
Verified
My WSF6606 Continues to run after the cycle is complete. I have checked for obstructions and have done a hard reset. Problem persist. There is a little water in the sump but I am informed that is normal. There are no clunking or noises. Normal humming sounds come from the dishwasher. Is the pump cactus?
I need a replacement front control panel grey for WSF6606X dishwasher. Does this come complete with the plastic neon light prongs attached to panel. What price New Zealand? The grey paint has started to smudged on the top of panel and looks horrible. The front cover shows available but behind it they are missing the plastic prongs to attach the neon lights to!
Just had a WSF 6602XB fitted. Is it common that the bottom tray doesn’t slide out easily, with or without dishes? Very clunky and we have to lift it a little to bring the tray right out!
How do I correctly reattach detergent compartment latch spring on WSF6606 dishwasher please?
Hi,
I have a Westinghouse WSF6608W dishwasher that fills then immediately pumps out to drain then displays F5 fault.
I have replaced the inlet hose (http://spares.bigwarehouse.com.au/product_info.php?cPath=64685_79594_111147&products_id=1881015) and I have also replaced the Heater Casing With Diverter (http://spares.bigwarehouse.com.au/product_info.php?cPath=64685_79594_111147&products_id=1879371) and still F5.
Is there anything else I should look at before replacing the Dishwasher Main Control Board (https://www.appliancespares.nz/products/westinghouse-blanco-dishwasher-main-control-board-32018027)?
My WSF 6606 Westinghouse Dishwasher starts to fill and runs for a couple of minutes then stops and all the lights flash. What is wrong with it . Thanks for your help BRENDAN
It looks like the door hinge spring has gone. Do you know how to get to it to replace it?
Hello, The Rinse aid Light Wont Go Out, Even after i Fill it. Any Ideas to fix this.
F5 fault.
Fills then immediately pumps out to drain then displays F5 fault with all lights flashing.
Checked inlet filter. Please advise.
Hi F5 Fault Recipient, Tania from Electrolux here. We are sorry to hear you are experiencing problems with your Westinghouse dishwasher. If you wish to discuss this further please feel free to contact me at customercare@electrolux.com.au attention Tania. Please be sure to list the reference number of 9117356 in the subject line of your email. Thanks, Tania
F5 fault.
Fills then immediately pumps out to drain then displays F5 fault with all lights flashing.
Checked inlet filter. Please advise.
Hi, My dishwasher has a power fault, no lights or display and I have checked and there is power on both sides of the on/off button. Is this a common fault?
How to replace inlet & outlet hoses ?
Hi Leigh. I'm sorry I can't answer that. I only use it and love it. Cherrs
My dishwasher came up code F5 so i replaced the inlet hose now no function works properly and water runs straight through the machine
Does anyone know how to fit the sump plug back on? Part no. 42058138. It came off when I removed the filters for cleaning but I can't work out how.
Water flowed from under dishwasher after making weird gurgling pipe noises?
Pull the dishwasher out and check if the hoses are still connected, check for leakages or if the hoses are broken maybe they were to squashed against the wall, if everything looks ok and the problem persist contact Westinghouse
My Dishwasher has just lost power in the middle of a wash cycle. Have unplugged and plugged back it to try reset it but still won’t power on. Any suggestions?
If your dishwasher still under warranty you can call them up and they will send a technician and have the problem checked, otherwise will cost you around 150 to call a technician, plus labor and parts
Not sure if it’s still under warranty. It’s about 4.5 years old
Westinghouse dishwasher-6606 Only had it for 4.5 years I have had problems with the on off switch Since the start -the water arm always blocked and have to tweeze residue out of it so it will work and clean the dishes Most of the time I need to rewash items in sink - defeats the purpose of having a dishwasher And now it has this F9 code Westinghouse want $155 to come diagnose the problem plus parts Can you give me a ball park figure on what it may cost as I am generally unhappy with this whole purchase I have bought many Westinghouse items and this is the worst purchase I have bought this one was supposed to be better than the last one Westinghouse replaced previously. I have lost confidence in your dishwashers- My Westinghouse fridges are fantastic- have lasted over 10 years -but dishwashers really disappointed.
Well you’re out off warranty therefore you have to fork out the technician fee labor and parts, cheaper is to buy a new one and you want a suggestion I will get a Miele one, top appliance, has many other features than a regular one. Then a Bosch but a Westinghouse dishwasher never again this model.
Where is the diverted valve
If you having problems with that is better to contact a professional as it is an internal part.
OK, thanks
having problems refitting my new machine in the cupboard hole ,dose not go all the way in so that it is flush with all cupboard door facings .I suspect the hoses my be the problem stopping the unit going all the way in . any suggestions would be appreciated Noel
Any idea why the soap holder does not open when it should?? Using powder.
there is no power at the control panel
No power to control panel
Get an answer from our members and Westinghouse representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.