Fisher & Paykel WashSmart WA75T65GW1 (7.5kg) Questions & Answers

Loved my F&p 7.5 rop loader, had it for 23 years with only one check up due to a small doyle getting suck, now you no longer make this model, am truely disappointed and will now need to buy the 7kg at a much higher price then my old machine, why ditch the 7.5, such a relieable work horse, I am also finding it hard to buy the 7kg model in Adelaide any help would be appreciated thank you.

what year is this as has a 10 year warranty on motor and it will not spin or empty water burning smell

Good afternoon,i have a fisher paykel WA75T65GW1 washing machjine i have replaced the water pump which has burnt out,also replaced the motor controller and reconfigured the machine to suit the 7.5 kg machine as per instructions but the machine gets to the spin cycle an wont spin, motor seem to just surge back and forward. would i be correct that this model doesn't have a sensor on the motor like most other models because lots of reviews show this can often be the problem with the moter not working. Looking forward to a reply because we really like this product regards Neil

wish will not power up

power switch not working

power switch not working

my machine begins pumping the water out in the rinse cycle then stops and a burning smell starts when the spin should start. What could be causing this?

My machine just refused to turn on after fully completely a wash cycle this morning. I hadn't noticed anything going wrong up until this point except perhaps for some squealing noise from time to time. The machine is 9 years old - is it worth calling in the service person or is it time to replace it? I have had no issues up until this point in time. I have requested a service but nothing available for a week.

What is the cost to replace the control panel on a F&P top loader Washing Machine?

We moved our washer recently. Now after connecting to the water source the washer would not fill. Please advice.

During spin cycle machine stops half way while draining water.

Hi we have a washing machine that has an issue we bought it off a friend and we have had it for a few years and it does not semi to do a spin cycle it will fill up and go through the cycle then when it comes to spin cycle it beeps until you attend to it so please let me know what we can do? you can email myself on [details removed]

My machine won't power on. There is a slight buzzing sound but no lights on the control panel.

We are moving house and wondered how to secure the washing machine for transit?

What is the cost to replace the control panel on a F&P top loader Washing Machine?

There was a CRACK sound about 2 minutes into wash and now the machine won’t turn on at all. I’ve removed the control board and there is burn marks so it seems something has blown although I’m not sure exactly what... I’m wondering if I can replace the particular part of the control board or if I have to replace the entire board itself... everything else seems to be fine on the board.

When was this model first produced?

Machine goes through cycle till it gets to pump out water from initial wash, starts pumping out water for about 30 seconds then stops, 2 minutes later starts pumping again until empty BUT it never gets all the water out. It starts filling for the rinse cycle but I still have suds sitting in the bottom. Machine does it;s rinse cycle but I can end up with more suds in the bowl than I started with...any suggestions...we don't have any Fisher and Pakyel Techs here so electrician came...really had no idea...???

Hi,

My machine has recently started to make a noise on the first half of the first rinse cycle, second rinse and spin cycles no noise? The noise is like a squealing noise, it probably is happening around 30-50% of the time at the moment.

Any ideas ?

Thanks in advance

When I turn my machine on, two wash lights and a spin light blink and the machine starts beeping. The only thing that stops it is the pause/run button, or turning it off at the wall. Any reason? Thanks.