Gerni Classic 105.1X Questions

david w.2y

how many psi is this machine?

Barry S.4y

Psi rating

rod6y

What PSI is this classic 105.1

Sydney singleton6y

I need to dye a high pressure hose 5mts long for a gerni classic 105.1 serial no 12513733 / 13/2012 can you help me please from Sydney singleton email sydsingleton@outlook.com

John L6y

My Gerni Classic does not respond at all when plugged into the power?

mark F.6y

My classic 105.1 which is many years old but has not had lots of use, works but something is not right as the motor keeps on pulsing when you release the trigger. What's happening here, is it repairable? Mark

Mosman 6y

Sounds like you may not be turning the tap supplying the water full on !!! Give that a try

Samantha Z.6y

I’m needing a replacement hose for my gerni classic 105.1 model.. are the hoses generally all the same connection with gerni ?

Mosman 6y

Hi Samantha, I’m sorry but I don’t know - suggest you contact your local Hardware store - Bunnings who stock them would know

Phil Sanders7y

Have a Gerni classc 105.1 and have used it four times, This time it started ok then started to loose water pressure and water began discharging from bottom area around pump.

GerardP 7y

I had the same issue. Had to disassemble the machine to get to the valves and pistons section. This was leaking! I bought some gasket sealant to create a gasket for this area and it partially worked. It was made with no gasket. I'll have to reopen the thing to see if there are rubber seals which can be replaced.

Phil Sanders 7y

Thanks Gerard, Ended up doing the same but found a small o ring where a ball bearing sat on had split, replaced the o ring and refilled the oil, at the moment it works OK.