Gerni Classic 120.2 PAD Questions

Phill S.4w

My 125.2 classic runs water through from the tap before being turned on and serges on and off not able to maintain pressure in work mode

MartyC 3w

Yep, they're garbage.

Phill S.4w

my 125.2 looks to be working well but won't maintain blast presure it just serges on and off when triger pulled

Teoman A.3y

Gerni Classic 125.5 turn on when completely dry. It stops work when water hose on. Then only start work a week later when its completely dry. Its a new unit but ı lost the receipt and was cash payment :( I believe there is connection problem ? Should ı open it ?

John3y

My Gerni Clasic 120.2 won't turn on. All the obvious things have been checked and issue has been isolated to the unit not turning on like previous posts above. Is this the on/off switch or internal faulty electrics? This unit has only been used twice, very disappointed as I bought all the extra attachments. So I will never buy another Gerni product if this can't be fixed easily.

Samantha T.3y

This is the second gerni 3600 I have purchased and had the same issue - works great for one day and then the electrics fail. What is going wrong? I’m very disappointed. Thought the first fail was just that particular unit but now it seems that the gerni 3600 is just very weak even for simple urban backyard use like mine. How can I fix it ? I’m not keen on making it Bunnings’ problem again when it’s obviously a problem of the product

Kavan A. 3y

I just came on Here to ask the same question.

Joan Dyson5y

I have No power to the gerni. Was using it then went back and now won't turn on

Krok 5y

Your problem may be similar to previous questions which were concerning water supply and pressure. If it's electrical, sorry don't know that side of things other than making sure it is all plugged and and no fuses/circuit breakers have been tripped

Michael and Anne G.6y

Our gerni 126.2 PAD 128470096, suddenly stopped working. There is power and the water runs through but no pressure anymore. thanks

Krok 6y

This hasnt happened to me. I had some problem with low water pressure input but it settled down. mine also acts up when I release the trigger and instead of sitting in a ready mode it continually surges as if the pressure cannot be maintained. Sorry I cannot be more helpful

Michael and Anne G. 6y

thanks anyway

Sandra W6y

The nozzle on my gerni classic 120.2 is washing in a line instead of a circular motion, I have cleaned it.

nadiaca11y

Have water coming out of nozzle but it is not high pressure when impress on trigger what am I doing wrong?

Krok 11y

when the water supply is connected and BEFORE the machine is switched on, pressing the trigger will allow water to flow though at tap pressure. I made the mistake of thinking my machine was not working at first because it made pumping noise when first switched on but stopped when the pressure was built up internally. This also means that when NOT pressing the trigger, the machine switches off and there is no audible indication it is working. On occasion when moving from place to place if I do not watch what I am doing I have pulled the plug out of the electricity supply and don't realise until I press the trigger and get only tap pressure.

Your problem could be something like this.

FLUBBY12y

My gerni 120.4 has no pressure and i need to get it fixed plz answer!

Handyman 12y

First check that the filter is clean. The filter is found where the water supply is connected to the machine. Next make sure that water is running through the machine and high pressure hose before you turn it on. The water supply valve only needs to be turned on in most areas only a little bit, in my case about 1/4 turn. Make sure power is available, then turn on your Gerni. If there is still no pressure please contact a service agent.