useless- problems with line feeder after one go
Bought this just after Christmas and used it for about 20 minutes when the line stopped coming out. Tried tapping it as per instructions and still nothing. Manually got it out and OK for about 10 minutes before line completely stuck on one side. Took it back and got a Makita - much better.
Absolutely amazing, never going back to 2 stroke!
After my 52cc 2-stroke line trimmer died, I needed a new line trimmer for my 1,450 square meter property.
I looked at reviews for the competition for better quality line trimmers, however I decided to go with the Honda UMS425UL Bent Shaft line trimmer.
I tell you what, this is a fantastic line trimmer!
* The bump head is so easy to use (pro-tip - bump the head on grass, not on concrete. This will cause the bump head to last a lot longer).
* It is so easy to replace the line.
* The trimmer is light and sooooo easy to start up. (I have even manag...
Reliable, starts every time
We've had this unit for 9 years and it's always been reliable, efficient and performed flawlessly. It's 4-stroke so uses normal unleaded fuel and apart from regular servicing has required nothing else. It's a little dearer than some but well worth the money and with 3mm line tackles most tasks easily. The only negative is the time taken to replace the line and it's a fiddly job as well.
Purchased in October 2010 for $393.00.
Fortunately it is easy to start....
....because I had to stop/start it 127 times to reload the line. It used 2 heads full of line to do a job that my old 2 stroke beast knocked over in 2 hours. It snapped, recoiled back into the head, bump head rarely worked, became tight and twisted in the spool....sooooo frustrating. I became an expert at loading it and triple checked the strange instructions. Even did a YouTube degree to gain my bachelors in line loading. So after a great deal of swearing and basic self control (I will give it one-more-chance), back to bunnings it went. Wish me luck with its replacement Makita.
Supreme Power at a great price!
This was my second Honda powered device. My first was a two wheel trencher which I cannot live without. This whipper snipper is ideal for at home or professional use. In my case it is for DIY at home and maintaining my yard. Although I have a small space, I didn't want to compromise on quality. I decided to go with the Honda over other counterparts. I'm really happy I did so. This unit exceeds all of my expectations. It does get a little tiring from longer use but I've had that issue with all hand held units like this one. Just goes with the st...yle of unit. Power is good. It looks good and it runs on pure unleaded so I don't need to mix fuel. I bought from Mowers Galore and also was given a speed feeder so I can feed line so easily. This was definitely the best feature!
Great Whipper snipper, definitely the best product on the market with ease. Always starts first go never had any issues with it at all. Highly recommend to spend the money to get this product.
Purchased in November 2017.
Great motor, Dodgy bump head
I purchased this whipper snipper about 6 years ago and overall I have been disappointed. I went to honda because I had trouble starting my old whipper snipper. The motor on this one has been great, but the bump head has been nothing but frustration. I can start it first go, but have to stop every 10 metres to fix the bump. The bump head also wears out in less than 12 months and I can't find any off market one to fit. As such its $55 for a genuine honda one every 12 months. I have to do quite a bit of whipping on a 1/2 acre corner block so will steer clear of these ones in the future.
Purchased in May 2014.
Amazing machine. Great performance. Great longevity
Had mine for over 12 years now. Pretty sure this model had only just hit the market when I thought I’d treat myself.
Best decision I made that year.
Never let me down.
Machine has done way more work than a bent shaft should ever be subjected to and in some darn harsh conditions too.
Replaced the plug maybe three times in all.
Line head is great. I see other reviews here saying it can be a little of a nuisance but generally that’s because someone has wound the line too tight or loose and perhaps overloaded it. I also found using a slightly ...
Purchased in November 2008 for $389.00.
Best Whipper Snipper Ever
Bought one from GYC Narellan on the weekend, best machine i have every used. One pull start as it is a 4 stoke and powerfull motor for domestic use. The cord winder is also a no brainer, very happy Honda.
Purchased in February 2019 at GYC Narellan.
Starts First Time Everytime
Absolutely love this. Starts like a dream everytime. Does a brilliant job and has more than enough power for a normal back yard. Really good on fuel. The only thing I can say would make this perfect is a shoulder strap, although the handle is more than good enough one you get used to it. Typical Honda quality.
- Verified purchase
Super reliable and effective trimmer with an excellent start mechanism, engine and ergonomics. Pretty low maintenance and fuel efficient with having only needed only one oil change in the last 12 months. The tap line release is a bit unreliable as it never seems to release extra line during operation. Other than that, highly recommended.
Great machine, but parts are a rip off.
I like honda machinery for their reliability and the UMS425/U is no exception. runs well, easy to start but a little under powered. Needed a diaphragm kit for the carby, that's where I was disappointed. Carby is a Walbro and the diaphragms for them come as a kit but not those purchased through honda. Each diaphragm is sold individually and overpriced total cost of nearly $40 for the set. Can get a full kit for a stihl or any other walbro or zama carby for between $15 and $25. Hope this is not an indication of the price of other parts. Found the kits elsewhere for $12. Prefer to use genuine parts, but for this price I can buy 2 kits in case one does not last and still be in front.
- Verified purchase
Buying a Honda thought I was buying something decent but the line trimmer head is an absolute joke. I tried several times to wind it as shown in the instructions be only worked once or twice before getting tangled inside the head. So I took it to the Honda dealer and he wound it but again it worked twice. So I bought a Honda easy load head and it was just another waste of time and money, the line again gets stuck and doesn’t work. What a huge disappointment this whipper snipper is. I noticed that other people are having the same problem. l should have stuck with my old Ryobi trimmer it was great.
Bought yesterday very, very unhappy
Bought this yesterday to replace a Stihl that was terrible to start. Got the Honda home and it started first time.
1. First problem, the balance is all wrong. The weight of the engine pulls down. I am not criticising the overall weight of the unit, it is just the out of balance weight.
2. Used it for a few minutes and the engine cut out, it would start again immediately but continued to cut out. Eventually I found that when it was cutting out if I released the trigger the engine would go to idle and then I could press it again and it would im...
Bit heavy but buying a harness helps.
Takes a bit of getting use to after having an electric Ryobi. Starts easily on first pull. It came with a strap but I ended up buying a proper harness to take the weight off my shoulder, much easier to use and control. Find it a bit hard to do edges as you have to swing it in an awkward position but I guess time will make it easier as I have only used it 4 times. Cuts easily through our couch and the bloody runners. Got a deal with buying a mower and this from our local mowing company Mowers Galore.
Honda reliability and service
Good 4-stroke trimmer for domestic use. However, be aware that 4-strokes are inherently heavier. I borrowed my neighbors 2-stroke Stihl and it was lighter and revved up faster.
But this trimmer is fantastic for domestic use. Although, it does struggle a bit with thicker grass like kikuyu or buffalo when it grows too long. For that reason I wish I bought the one up from this model which is more powerful.
The reason I am taking away a star is it tends to vibrate a bit and hence fatigues me quicker. I have a feeling it's because of the nature of a bent shaft trimmers, so another reason to have bought the straight shaft. I reduce the impact by wearing thick leather work gloves though.
Amazing mashine and staff
I bought my Honda recently and had no trouble at all. Works perfectly every time. Quite and functional. Great staff members especially Cameron from RedShed Dandenong. I got my Honda and tank of fuel and oil into reservoirs. Also Cameron explained all details about mashine and how to maintain all parts. Easy to look after it. Definitely the best choice for small and medium size of cutting areas.
Please fix the head and winding of the cord
Have had this for 2 months now and despite the best efforts of the good folk who sold it to me I cannot wind the cord without it jamming up after a few bump feeds, I think that the head design could be more user friendly when removing and replacing it. I will have to look at other options for the head. Other than that the machine is everything that I had hoped, it starts first pull - has plenty of power and just gets on with the job.
Great in most areas...
I am done with 2-stroke! This machine, even though it is a domestic unit is a 4-stroke and everything that I hopped for. Quiet, powerful and easy to use. My only negative would be the balance of it - the controls need to be a little higher up the shaft to make it more comfy when using. Easy to start and you can't over-prime it. So simple now just using normal unleaded fuel. Have had it for 6 months and never missed a beat.
Light enough for the missus!
Have had this bent shaft whipper snipper for over 10 years, it is still running like a beauty. We live on 5 acres so it gets a fair bit of use in summer time. The wife uses it more than me so the following is her feedback.
The good:- Light enough for her to use for hours at a time, no mixing of two stroke fuels, no smelly smoky two stroke fumes when using, doesn't require a lot of maintenance with a oil change every 6 months or so, not very loud when running, easy to restart when it is hot, very economical on fuel.
The bad:- Sometimes hard ...
- ‹ Prev
- Next ›
Questions & Answers
My UMS425 will not idle. It runs fine but as soon as I let off the throttle it stops. Have pulled apart the air filter body from the carby in case the O ring seal had cracked or deteriorated but was fine. Getting new spark plug to try but an outside chance it is that. I use 95 grade petrol. Have replaced fuel lines and filter. Adjusted the throttle to correct free play but still stops. Only if I adjust throttle so no free play adn at higher revs will it not stop. Any ideas!
The needle on the rotary valve of the carburetor needs to be adjusted, most likely out (anticlockwise) as it seems like it may be running lean on idle. This often happens when the internal carby parts harden from E10 fuel, or it is an older machine. Later model machines require a specialised tool to do the adjustment, most mower shops toss the carby and fit a new one as adjusting correctly is a specialised skill.
Thanks Craig, I was thinking of replacing the carby. Quite cheap on EBay but gave it one last go as I was getting annoyed with the grassy edges. I readjusted the throttle cable ignoring the 1~3mm idle free-play and low and behold it started idling. I added about 10% Metho to the tank to deal with the methanol residue and so far so good and will continue doing this for a while. If this occurs again a new carby is on the cards. Cheers
what is the difference between UMS425 and UMS425U models? Can't seem to find answers online.
The line is automatically releasing from the spool & winding itself around the outside of the cutting head. I have tried rewinding but does not help. The cutting head is the original that came with the trimmer. This happens with both the 3mm twist line & the 2.4mm round line. Both these lines worked well previously.
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.