Greg M.
Greg M.

Where can I get replacement feet for my pb2000i

Ronnie M.
Ronnie M.

Can you buy inverter for pb2000i generator if so what price

Peter Townsville
Peter Townsville  

DONT BUY! The electrical coils are CRAP! Do what I did after I threw my Power Boss away, get a Briggs and Stratton generator for a couple of extra $$$

Peter
Peter

What db noise rating does the generator have

Scott C.
Scott C.

What wait oil does my 2000 watt take?

Frank M.
Frank M.

No spark, just quit.

Betty T.
Betty T.

Can I get an inverter to replace mine

Peter Townsville
Peter Townsville  

Hi Betty, Hey I got rid of my Power boss a while back and replaced it with a BRIGGS AND STRATTON P3000. Best inverter, and RELIABLE. See my review in my profile, https://www.productreview.com.au/reviews/465c5fb3-7b3c-36a7-b98b-4629dd25477c Power Boss are ELECTRICALS are unreliable, their electrics are of poor quality, the motors are OK but they don't supply the power on their own!

Ray G.
Ray G.

Hi, I moved to Innisfail QLD and the property came with a Powerboss PB2000i which I started up during a recent power outage due to a cyclone. The motor ran good but the unit is not generating any electricity, is there a fuse or similar that might be blown, I tested the on/off switch and it is okay. Hoping you can help me before the next outage. Ray

Peter Townsville
Peter Townsville  

Take it in for a service! Best people are STIHL SHOP as they handle BRIGGS and STRATTON. Your generator has a Briggs and Stratton engine but third party electricals! This same thing happened to me and you will find its the reset button that needs fixing. This is why one bought a BRIGGS AND STRATTON, see my review on here for more!

AlanL1945
AlanL1945  

From the Powerboss Operator's Manual: Start the generator with no appliances plugged in. The green light should come on. If not, look inside the side panel and get the Model, Revision and Serial Numbers. Then call the generator helpline 1800.436.372 who will advise who can service/repair it.

Grahame G.
Grahame G.

Hi powerboss 2000 pb I when pull cord to start does not ingage to motor it’s spinning and returning but doesn’t turn motor is it worth fixing what is the solution thanks Grahame

AlanL1945
AlanL1945  

If you purchased a new generator then the warranty will contain a phone number for support. Alternately you should be able to find a Briggs & Stratton support centre via the internet and/or yellow pages

Dave
Dave

Started generator turned on microwave generator went into load mode then stopped now cant start. Any help?

elsworth
elsworth

what oil can we used on this pb2000i generator?

AlanL1945
AlanL1945  

The owner's manual provides detailed instructions on the oil grades that can be used in the generator. The new generator will be delivered with a bottle of oil.

Gail
Gail

Do they have covers for them?

AlanL1945
AlanL1945  

This question should be put to a Powerboss dealer.

Peter Townsville
Peter Townsville  

Yes, they should have had em there where you bought your generator.

Get an answer from our members

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.