Yates Zero Weeding Brush Questions & Answers

Hi Chris, Please contact Lincoln Plastics who directly supplies this part. their contact number is 08 84473600. All the very best! Hope this information was useful, if you have further queries do let us know.

Kind regards Yates

Just wondering why you don’t sell the spare parts yourselves, or who ever sells your Yates Zero weeding brush, can’t also sell the brush part & perhaps other parts from it, Bunnings sells the Zero weeding brush, why not also the spare parts for it? Such a long winded way to get a spare part that may not even be the right part. First you have to ring them in SA & because they are only a wholesaler, you then have to email them what you want & l guess l’ll find out sooner or later if that actually works or not. As there is a BAD review on here saying the person did every thing they were told to do, but the wrong part was sent to them & they had to pay the postage to send it back to Lincoln products before they would send the right part!!!

Good question Chris. Zero could do a lot better supporting their product by having the replacement brush heads more readily available. After all, it is part which will wear out long before the wand.

Hi Carol. We do not recommend using Slasher in the weeding wand. The only product suitable for use is Zero Super Concentrate.

If you mean Zero Triple Strike, it's a non-selective herbicide meaning it will kill anything it comes into contact with. It can be used with the weed wand, just make sure to rinse it when finished. If you want a selective herbicide then you can use something like Buffalo Pro, Bin-Die or any other broadleaf herbicide which is safe for grass.

Hi Barry H. the Zero 490 Super Concentrate is registered for use in the Zero Weeding Brush. Unfortunately, it is not registered for use with the Zero Triple Strike. This product contains nonanoic acid and can cause the rubber parts of the brush to perish.

external link 

Hi Ozzie,

We are sorry about the experience you had, and we strongly advise reaching out to Lincoln Plastics directly to address the issue and obtain the correct part.

Kind regards

Consumer Advice Team

No. Read the reply they gave me. If you do not accept this is just a run around then it is your fault as you are putting your trust into a company that has no real answer and are just accepting peoples money for a product that will fail. And they know it.

Hi Desma, please call Lincoln Plastics (08) 8447 3600 for a replacement brush for your Yates Zero weeding Brush.'Yates Zero Weeding Brush' - it helps direct the weedkiller straight onto the plant. An effective and easy way to kill weeds and grasses in rockeries, garden beds, paths, driveways, along fencelines and lawn edges.

external link 

Kind regards

Consumer Advice Team

Hi Mike, Thank you for contacting Yates. We are sorry to hear of your experience with our Yates Zero Weeding Brush. It is concerning that this has happened and we would like to look into this further for you.

In order for us to further investigate the performance of our product, we need to ask you some questions. We apologise for any inconvenience these questions may cause, however, to ensure quality control we need to ensure that we properly investigate the issue.

Can you please send an email with details and images from your experience to consumer.advice.yates@yates.com.au

Once we receive this information, we can then talk to our technologists who will assist us with our investigation.

We thank you for taking the trouble to contact us, as this enables us to continually review our products.

We look forward to hearing from you. Kind Regards Stamie

This is a lie I tried and the answers cost me a brand new weed wand either they know it will fail and give you the run around as they did me.

I gave it up and bought an Ozito battery run spray. It has a long wand and is fabulous.

Hi Karen, You can find a store near you through our website external link  That's not good your old one broke after two uses. If you would like to send us some images, proof of purchase etc we can investigate this for you consumer.advice.yates@yates.com.au

Michelle Yates Horticulturist

Hi rita, Thank you for contacting Yates. We are sorry to hear of your experience with our Yates Zero Weeding Brush. It is concerning that the product has not been easy to use and we would like to look into this further for you.

In order for us to further investigate the performance of our product, we need to ask you some questions. We apologise for any inconvenience these questions may cause, however, to ensure quality control we need to ensure that we properly investigate the issue.

Can you please send an email with details and images from your experience to consumer.advice.yates@yates.com.au Once we receive this information, we can then talk to our technologists who will assist us with our investigation.

We thank you for taking the trouble to contact us, as this enables us to continually review our products.

We look forward to hearing from you.

Hi William please call Lincoln Plastics (08) 8447 3600 for a replacement brush for your Yates Zero weeding Brush. 'Yates Zero Weeding Brush' - it helps direct the weedkiller straight onto the plant. An effective and easy way to kill weeds and grasses in rockeries, garden beds, paths, driveways, along fencelines and lawn edges.

external link 

I used a vise to hold the pipe then turned it off, was very tight. Please take me off your mail list, Thank you

Hi John, You can purchase a replacement head at $10 each inc/gst, plus approximate $8-$9 for postage, up to 3 heads. Payment will need to be made by electronic transfer, cheque or money order, as eftpos is not available.

If you would like to proceed please respond with your details such as quantity required, delivery address and contact details. We will then send transfer details.

Regards, T N Hand Troy Hand Operations Manager Lincoln Plastics Pty Ltd Office: 08 8245 2000 Direct: 08 8245 2003 MOB: 0433 967 795 E: thand@lincolnplastics.com.au

We use roundup

thank you very much rosemaree...

I have been informed that no such replacements are available

The brush is worn out on my weed wand and I was wondering the same thing, if there are replacement parts. As a stop gap, I've made do with a piece of chux/rag acting as a brush.