Martec Heaters

Great product – It extracts the steam and prevents moisture on the walls the heaters are great the downlights create shadows on your face when standing in front of the mirror. Other wise install make-up lighting. Very happy other wise. Show details

Updated Mark 2018 2022 2024 Martec Linear MBHL 1000W reviews. Previously after updating the wiring and insulation by my electrician on my second unit… Read more

since April 2024 the 1000w globe has now blown. On inspection the wire filament in the globe has failed the globe connections for the unit seem to be ok. It’s been 18 months since second unit was fitted with the wire and connections upgraded. We mainly use the heat lamp in winter. I have cleaned all dust off the rotating round fan flutes and cleaned the interior housing. Haven’t fitted a new 1000W globe as yet. Cost for new ones are average $40 Note I didn’t have the fan on with the heat lamp on at the same time when the lamp blew so me thinking that the fan should always be on when using the heat lamp as it would be a cooling affect on the heat lamp.

Looks good but that’s about it – Installed about 3 years ago - always noticed condensation dripping from fan and plastic surrounds - checked ducting wasn’t blocked, checked air flow… Read more

which seemed to be ‘OK’ (I would have thought for a ‘high flow’ machine it would have been more). We lived with it until now when I heard an electrical arcing sound and one of the lights flashing. Turns out the condensation is leaking onto the light sockets on the rail directly underneath the fan. Poor design.

This is my second unit that has failed same problem as the bigger unit (failed after 6 months replaced with second unit under warranty only to have… Read more

that fail then replaced with different brand ) heat glob burnt out after DO NOT PURCHASE THEY ARE A FIRE HAZARD ! Only been installed by electrician for four Years : Martec do not stand by their product Should not have to replace every four years only for the same thing to happen again Rubbish product Emailed Martec direct wiped hands of problem

Not great – Just bought this unit for our bathroom, and though the exhaust and light are adequate, the heat lamps barely give off any heat. Even standing right… Read more

beneath them (the roof is not high, and I am not short), you can barely feel any heat coming off them. Will be returning asap and purchasing something with a better heat option.

Agreed. We’ve had the same issue with our fan. It seems as though it doesn’t extract any steam from our small bathroom. We’ve had the fascia replaced… Read more

twice bc the light doesn’t work, at our own expense. Martec didn’t supply labor. Wouldn’t recommend this brand or product.

As per other reviews the extraction is very poor. It's says it has the same extraction volume as the unit it replaced - another brand (Ventair),… Read more

with which we never had any moisture issues. Now this new Martec unit leaves the room and mirrors steamed up at every shower and takes hours to clear the room. Heating is excellent. Light is good. Extraction is well below average. We will have to install a second fan now or revert to our old unit and patch the ceiling!

Buyer Beware – I've got two small bathrooms( toilet and shower) and electrician got these when renovating. Says they have air extraction of 250m/hr which was… Read more

supposed to be right for the size of our bathrooms. Absolutely useless. Does not remove steam or odours, which was a nuisance as both bathrooms are ensuites. Don't buy this. Have replaced these with another brand and better extraction. The bathrooms that I have used it in is 3m/2m approx and the other one is even smaller.