Eloise P
Eloise P

My machine says ventilate, when I press ok nothing happens and it has a continual beeping sound

Bizz
Bizz

Hello, our Merol-712 makes a fine cup of coffee. The only problem is, it’s not hot. Could this be as simple as a blown fuse? If the heater is no good, are replacements available?

Bizz
Bizz  

Buzz here again. To clarify; I’m talking about the ME-712, NOT the 710. In the interim, we opened the unit up and checked continuity on fuse F1 (ok), both heater units (0.3 ohm) and their respective fusible links (open circuit). Not holding my breath, but would love a response.

Rachel C.
Rachel C.

Why is my machine telling me ventilate

Vince C.
Vince C.

Does anybody know how to set coffee Brewer compression settings

Coffeedan
Coffeedan

I bought the Merol automatic machine mE-710 so far I’m generally happy with the machine, however I can’t get the machine to foam the milk. It seems to start drawing the milk from the milk container shortly after the milk hits the head, the steam stops and then it just heats the milk but no foam. Anyone else having this problem. The manual sucks

Trd4me
Trd4me

Dose anyone know how much to set the compression for the brewer (e.g. how much it compress the coffee before brewing)

Grace
Grace

Can you adjust the milk froth to make a flat white or latte?

StuartV
StuartV

How does one calibrate an ME 709? Both the powder quantity, and the ml quantity that appears on the calibration message window. I have same complaint as others - grinds, but then dumps the powder followed by the calibration message.

Nancy K.
Nancy K.

Hi the water is not registering that it is full so it keeps beeping to fill and will therefore not make coffee. I have cleaned all filters and inspected all parts as manual says. What else could be the issue. Thanks

Charmaine
Charmaine

Hi, I have a MEROL ME-710. Went to have a coffee, switch on and then pressed screen. The bar cones up but doesn’t move. Try to press press, beeps but nothing happening. I have cleaned out all trays, etc and still nothing. Any suggestions? Thank you

Richard I.
Richard I.

Hi, I have a merol mr-712 and when grinding beans I get a beeping sound and a blue bean icon on the lcd display then it dumps the ground coffee. Any ideas?

Turan U.
Turan U.

l need a MEROL ME-710 DISPLAY -RECYCLED can you help me please? [email address removed]

aps.eletronica
aps.eletronica

merol 707 msg FILL WATER..no power..Help-me pls?

spike
spike

how do I remove the front panel of my Merol 712

spike
spike

I have just had my Merol apart and cleaned it now i cannot get the brewing [ brown] unit back in?

spike
spike

water leaking from my Merol whilst its 'Brewing'

Norden V
Norden V

Hi I have an MT Kitchen ME-708C fully automatic coffee machine and is giving me the error that is missing water when is not, How I can fix it or reset it? Thank you in advance.

Nick w.
Nick w.  

you need to replace the magnet in the water tank or next to water tank cheap to replace i found one online

Jems B
Jems B

I have a Merolagani coffee machine which shows no waste cup some time it works perfectly. I wonder to know where is the waste cup sensor is located ?

Hans
Hans  

I think its just in the door hinge - close the door without the container and it should function.

Jems B
Jems B  

it didn't work

sharon
sharon

Does anyone have a hose that goes into the milk for frothing? i lost mine please

Pat C.
Pat C.  

Go to a pet shop & ask for silicon air line, you can pick up a meter for a couple of buck but only need a small amount so you have spares.

Rocsta
Rocsta

Hi I have had my merol machine in storage for a while. Just started it up again and the colour screen comes up with the merol name, logo and time but that’s it nothing happens no mater what I do. Can anyone advise? Please.

Get an answer from our members and Merol representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.