Maytronics

I purchased S200 Dolphine pool cleaner in 2023 for about A$2,200. It worked perfectly fine for over a year, but then performance declined after that.… Read more

Right after the second year and when the warranty expired, one morning the adaptor broke and I had to pay over $300 to replace it and six months after that the little spinner inside the motor stopped working, which is going to cost me over $500. Overall, the brand reputation is misleading. My friends' cheaper cleaners have worked much longer with a similar performance so do your own research and stay away from spending too much on Dolphine

The wifi receiver is a cheap unit and requires the unit to be within 1m of the wifi access point, which even when it is does not connect. When it randomly does connect the robot does not work. Not worth the money, do not waste your money.

I purchased a Dolphin X30 Brand new in a Bundaberg Store, Nov 2025. Worked OK for a while until it stopped working altogether. I took it back to the… Read more

place of purchase. I have lost track how long it has been, something like 2- 3 months waiting for it to be fixed under warranty. I can handle it failing, I can handle it taking 2 weeks. But 2 months or more and still waiting, is just too long for an item less than 12 months old, not good enough. Tim McCollum Bundaberg,.

I bought this cleaner in November 2019 for $2,590. I’ve spent way over $2,340 on repairs. It’s a good cleaner but the app that controls it is really… Read more

bad. I’ve deleted and reinstalled it regularly hoping that the newer version will be better but no luck. These are the problems.

1. When the app eventually loads, it often can’t make contact with the robot cleaner despite that I’m standing next to the power pack. 2. Overcoming the above problem by repeated random button pushing, the Home Screen when it eventually displays is all but blank. Going to the ‘change cleaning mode’ screen and returning to the Home Screen seems to fix this problem (I think). 3. Changing the cleaning mode does not always make the cleaner obey the new mode. This morning I put in ‘floor only’ mode only to see it cleaning at the waterline a few minutes later. 4. The manual drive inputs take so long to reach the robot that I find this feature practically useless. 5. The other features supposedly offered by the app (shop?) I never use.

I don’t need to be able to operate my pool cleaner from anywhere in the world, just when I’m next to the pool. It would be wonderful if Maytronics ditched the silly internet app and came up with a reliable hard-wired control system. I’d definitely buy a new cleaner if it had this feature.

Great Pool cleaner that does the job – Scrubs the waterline, climbs the steps and ledge. Leaves the pool immaculate. Easy to clean. I have a 7x4 Concrete pool and I opted for the wonder brush. Bought for $999 on a boxing day special

Dolphin cleaner not worth money spent – Brought this unit from Clark rubber Cannington just over 3 years ago after trialling the unit instore. Worked great for the first year. After that… Read more

needed to reset clean start for every use and it would only go for an hour then needed restart again. Cleaned basket at every stop but no change. After 3 year with 6 months no use for winter no communication from controller and stopped working completely. Took to store for repair and told motor seized and all internal parts need replacing. $1000 to fix. Would not waste that money again on an overpriced cleaner that only just lasts through warranty period. Main debris type was sand and small leaves which the cleaner handled well for first year or so then after that took about 3 cycles to remove what was done in one. Cord tied itself in knots and had to untangle so cleaner could reach other end of pool. Would not recommend this cleaner to anyone thinking of purchasing.