Zodiac Suction Pool Cleaners

9 listings

Zodiac G2

Latest review: G2 vacuums all leaves, sand and similar debris. It provides good coverage of all pool surfaces except steps. Occasionally it gets stuck in a corner so it would be helpful to have online advice on how

Zodiac MX6

Latest review: Ok for bottom cleaning but I have had to use my old aqua buddy to keep the walls clean in My pebblecrete pool. Also gets caught up in corners. Mx8 with reverse would have been a better buy. Now I

Zodiac MX8

Latest review: I've used it now for two weeks and my pool has never looked cleaner. Doesn't miss any areas like previous suction cleaners and cleans around the top perimeter also. Two minor issues, it beached

Zodiac AX10 Activ

Latest review: Had bought the unit for my pool, it started having issues after 10 months, returned for repair three times, same issue, drive gear failure. Zodiac then looked at it and said that it had been exposed

Zodiac T3 Suction

Latest review: Ive had the cleaner nearly 2 years and have replaced the diaphragm 10 times. When are you going to ditch this useless piece of crap. Where is your quality control? Looking elsewhere for a better

Zodiac Baracuda T5 Duo

Latest review: The instruction manual is a joke both supplied and online. I had to watch YouTube video and the thing still isn't working properly after hours of tinkering. My relatively new Zodiac pump has to be on

Baracuda Manta

Latest review: We have mostly palms around the pool and the strands fall in dried up and fresh. We have a few smaller leaves that come from the neighbouring tree and small seeds etc. took a few months to finally

Zodiac Baracuda G3

Latest review: My pool is 15mx3.5m with two skimmers and a 3-level pump. I have been using two extra pipes, running the pump at the top suction level and using one skimming box (close the other one) to make the

Zodiac Aquasphere

Latest review: We have only had the cleaner a few years and have had to replace the diaphragm many times. The flow has been adjusted to stop it wearing out so much but this hasn't helped. We now have to replace