Electrolux EMF2527BA Questions

Geraldine L.6y

Microwave overheats then stops working. Once cooled down it works again. We are using the provided surround and this seems to stop the airflow exiting which exacerbates the problem. Considering drilling out some extra air vents in the surrounds. Thoughts from Electrolux reps?

ozcan 5y

We have EXACTLY the same issue.... STOPS completely, then starts after maybe ten minutes. We love Electrolux products, but this microwave is just a dud. Ours is free-standing (no surround.) One star...

ozcan 5y

Only because there's no ZERO option...

Geraldine L. 5y

Ours is builtin and there is a design problem which stops airflow and causes the overheating. Since increasing the airflow around ours we’ve had no more problems.

Colin6y

My EMF2527BA shut down completely, no light, no digital display, after reheating food which produced quite a lot of steam. I checked fuses etc but everything was ok. After standing for about 10 minutes with the door open, it came back to life and has worked fine since. Is this some sort of inbuilt protection against overheating or might it be a fault.

Geraldine L. 6y

I have the same problem. Ours is built in and it seems that teh heated air has no escape as it comes out the front instead of teh back

Rarotoga D.6y

Is there some reason there is so much steam after heating food?

Dan7y

Hi there my parents are older and they find it very hard to see what buttons they are pressing. Is there a way you can turn the lights on so they can see the buttons or an overlay which is easier to see?

They have the Electrolux EMB2527ba

Thanks

Dan

ESH 7y

Not that I am aware of, have you emailed Electrolux direct?

ozcan 5y

Our lights are shot, too. Missus just reminded me about how WET it is inside, once food is cooked. On our unit, it looks like a series of vents _should_ have been made on one side, but haven't been cut. Could this be a bad batch, I wonder?

Mike R7y

What is the maximimum temperature that can be set for convection cooking?

ESH 7y

I set my microwave to convection cooking and maximum temperature set was 220C

Mike R 7y

Thanks ESH, went and bought the oven after your post.

Maree8y

Can someone please tell me how to turn the display/clock on this oven EMF 2527 as it lights up the whole dam kitchen. The manual says to press - or + and then off...where is the off button? I have tried the cancel button but to no avail. It is in standby mode when I try.

Thanks Maree

ESH 7y

Press the timer/clock (twice) clock symbol will display. Hour starts flashing press up/down button until u have correct hour then press clock. Do the same to set minutes. Press clock twice and display will be at time you have set