Beko WMY7046LB2 / WMY8046LB2 / WMY9046LB2 Questions & Answers
Verified
How do I shut the door of WMY7046LB2. I have set up for a wash but door won’t close
Drum doesn't turn in wash cycle nor does it spin on spin cycle.
My front load beko keeps stopping pre cycle and have to push start all the time
Could be overloading the machine or kinks in the hose. Do you often have to push the machine back to the wall after cycles? Possibly pinched a hose back there. Adjust the machines feet for less vibrations and smoother spin cycle
Need help how to get the black emptying hose back as it has sprung into the machine.
Does not wash or spin but will drain. Have checked/cleaned Filters/hoses. Thank you!
Same here
My 7046 won't fill to capacity an start's to drain ????
When I'm washing with my Beko Pro Smart WMY 8046 <B2 on a 'Daily Quick Cycle'... on completion and I when I open the washing machine, there is extreme heat in the washing machine including the clothes. I checked the Temp gauge which reads 40 degrees - not set at this set. What could be the problem?
washes but does not spin,rinse or drain
The door on my washing machine will not open once the cycle is completed. ?????
Our machine has started stopping every cycle with 13 minutes to go , have changed programs and didn’t change and checked bottom filter for blockage and was clear , any ideas
Is there a soak option?
My machine is not drying out anything after i just moved houses. Please i need help with that!
Why didn’t you contact the service number as per your manual?
How to replace the door handle as it is very hard to open
does this machine heat its own water
Yes it does Aileen! You only need to attach the cold water tap to the machine.
Why is my machine showing the quick button and pet hair removal button lights. It won’t let me start the machine or select a wash ductile. The whole machine is frozen! Help
Turned the power off unplugged the chord to do ironing when puting the plug back into the wall and turning power on the machine won't turn on at all ..
Could be no power feed. Check you power point, safety switch or fuses box.. Some irons are like tripping the power switch or burning fuses
No the power point is fine I checked it first
machine works well once started, however you have to push the door closed with a fair bit of pressure to getit to start ,a lot more than previously.
Hello I have lost the instruction book and do not know which compartment in the Draw to put in wash powder and conditioner ect
Where is the carbon brushes located? Can't find them. Do i have to open the motor itself?
washes but does not spin,rinse or drain
Get an answer from our members and Beko representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.