Tracy-lee S.
Tracy-lee S.

Hi, my EFW1481 won’t fill and has ‘can not fill water, please check the tap is open then press on button’ written on screen panel. It doesn’t do anything other than try to fill.

Electrolux
Electrolux   DM   

Hi Tracy, Upjinder from Electrolux here. We are sorry to hear you are experiencing problems with your Electrolux washing machine. If you wish to discuss this further please feel free to contact me at customercare@electrolux.com.au attention Upjinder.

Thanks, Upjinder

Tan P.
Tan P.

Need some help I’am encountering some problems with Electrolux washing machine model EWF 1481, during the last 2 min rinsing it non stop fill water, pls advise how can I reset it. Your feedbacks is most appreciated

Johnson
Johnson

Have got the EWF 1481 Electrolux washer and it seems to start the cycle, gets 2 mins into it then stops and goes back to start again. But door stays locked as has some water in drum... I can drain this and will eventually unlock but only to repeat again! Is there a quick fix or has anyone else had the problem?

Electrolux
Electrolux   DM   

Hi Johnson, Vivian from Electrolux here. We would appreciate the opportunity to discuss the concerns you have raised about the Electrolux Front Load washer. If you wish to discuss this further please feel free to contact me on 1300 365 305 or at customercare@electrolux.com.au attention Vivian quote Ticket Number 4577530.

Bernadette R.
Bernadette R.

I have a front load Electrolux Time Manager EWF 14922. Initially, the machined did a cycle but the door would not open. I drained the drain pump and cleaned the filter and then did a spin cycle but door still would not opern. Did a diagnostic test and error E42 appeared. Now the machine won't start, it just keeps making the clicking noise like it's locking/unlocking and the lock and wash symbols flash. Is there some way of troubleshooting this?

Electrolux
Electrolux   DM   

Hi Bernadette R., Zaida from Electrolux here. We are sorry to hear you are experiencing problems with your EWF14922. We would love the opportunity to discuss the concerns you have raised. If you wish to discuss this further, please feel free to contact me at customercare@electrolux.com.au attention Zaida Ticket Number 1724994. Thanks Zaida

ryan a.
ryan a.

Im in a drying situation...suddenly beeps and showing..."check the tap" then beeping repeatedly...how to fix it?thanks for the answer

deanhoppitt1
deanhoppitt1  

Hi Ryan, I have the same problem and found this online external link 

Jason D.
Jason D.

My Electrolux EWF14012 seems to only be filling with water then it stops and says check the tap which I have obviously done. After message comes up it does not do anything else just waits and beeps. Any ideas?

samjam
samjam  

mines doing the same thing. Did you work out what this was ??

Tracie
Tracie   

Mines doing the same! Also same model, any idea?

Jason D.
Jason D.  

Had the repair man come over to fix it, he found a loose hose inside. Was a simple fix.

Martin T.
Martin T.

Replaced door lock on ewf 1047 washing machine. Still clicking and door lock light flashing.any idea?

Colin M.
Colin M.  

Have you found out problem yet i have same problem

JWR
JWR

My EWF14012 washing machine has started to come up with a message “Check the tap”... during main wash and rinse cycles and the cycle then stops. I have obviously checked the tap as it says and checked the inlet hose - all looks normal and message continues to come up. Nothing in the user manual about this error message. I call Electrolux, and they could not tell me what it meant either! Help. Very frustrating, as my Electrolux Dryer just needed a new part, and my Electrolux dishwasher also had an issue recently - all products were purchased around the same time and only a couple of years old - so disappointed.

Angela
Angela

The beeps, for example to say the cycle is finished, is not working. If you are close to the machine you can just hear it. I didn't realize I would miss it so much Haha. Is there a quick fix?

Shane R.
Shane R.  

in the settings you can change the volume of the cycle finished beeps.

Angela
Angela  

Ok thank you

Suzy N
Suzy N

I have a front load Electrolux Time Manager EWF 1481. The machine won't start, it just keeps making the clicking noise like it's locking/unlocking. Is there some way of troubleshooting this?

Suzy

Thelma
Thelma  

Hi Suzy - I think you would have to get a technician. I don't have this machine now, and have gone back to a top loader. Sorry I can't help. Good luck!

Electrolux
Electrolux   DM   

Hi Suzy, Julie from Electrolux here. We are sorry to hear you are experiencing problems with your washing machine. We would love the opportunity to discuss the concerns you have raised with the machine

If you wish to discuss this further please feel free to contact me at customercare@electrolux.com.au attention Julie

Thanks

Julie

Andras
Andras

I have a draining error and can’t start any program on an EWF 1481 machine

Can you help me with this?

Thelma
Thelma  

Sorry I'm not sure how to fix this problem. You probably need a technician

Good luck

Lynne
Lynne

I have an Electrolux time manager 7kg eco wash machine. It had a clicking sound and error 42. I replaced the door mechanism and it's still doing it. Can you help me please. Lynne

adrian
adrian  

Sorry I'm not a washing mechanic

Electrolux
Electrolux   DM   

Hi Lynne, Tania from Electrolux here. We are sorry to hear you are experiencing problems with your Electrolux washing machine. If you wish to discuss this further please feel free to contact me at customercare@electrolux.com.au attention Tania.

Thanks,

Tania

Lynne
Lynne  

Thanks Tania, I have emailed you.

Brime
Brime  

I have "Electrolux sensitive wash system 7kg" 3 years old and It had a clicking sound so I try to fixe it and it works perfectly. Just remove the upper part then you will find a concrete piece with three bolts that bolts from the vibration have been unscrew so I went to "Bunnings" and I bought "rubber wiring". It cost me only $3.99 then I put the ring in the screws and tighten them strongly and now working perfectly :)

Andrew Sutherland
Andrew Sutherland

Ewf1481 has started stalling with about 17mins to go in cycle. Error message says to check that the tap is on as the water's not coming thru. I press the play button and the wash continues. Is this just a sensor as the tap never gets turned off. Is it worth fixing?

Thelma
Thelma  

I haven't had that problem, but it could be an easy fix for an appliance technician. I have actually had a new motor installed since I put up the original review. The machine was only about 4 years old, but it stopped working, and the quickest way out was to put the new motor in, rather than shop for a new machine. I have said I'm not spending any more money on it. Your problem though could just be a valve that needs replacing. Have you tried running it through the cycle with epsom salts? Good luck

Andrew Sutherland
Andrew Sutherland  

Tried the Epsom salts but no luck. We haven't been overly happy with the machine's performance. We had two motherboards replaced on warranty as well as the door. Same as you I don't won't to throw any more money at it! Hopefully we can get some idea over the phone of the cost. It still runs through the cycle but needs us to hit the button. Thanks for the advice

sharyn
sharyn

Hi my washing machine is saying it is locked .. Any ideas?

Colin
Colin  

I have the same problem...can anyone help us?? [email removed] thanks Colin

ScottC
ScottC

Hi, I've got an Electrolux ewf1481 washing machine and it won't run, says spinning, draining etc, but door lock making clicking noise and has error codes saying door not locked! I've just ordered and replaced the door lock assembly part 1249675-13/1 but still clicking and not running with new part installed! Any suggestions?

Thelma
Thelma  

I haven't had that problem, but one very similar occasionally when I try to start the machine. I found it helpful to turn the power on and off a few times at the power point. Have you tried contacting Electrolux? You shouldn't be charged for the part if it hasn't fixed the problem. Good luck

Jason Gellatly
Jason Gellatly

Hello. I am looking at buying a second hand Electrolux front loader but the seller said it misses a cycle every now and then, is this going to become a big problem??

Tothyapples
Tothyapples  

Yes

Marcel
Marcel

Hi, my washing machine doesn't spin or drain, is it worth repairing? We have it for about 5 years and had to repair it once before.

Washingbyhand
Washingbyhand  

You should find out how much a service call will cost in your area then decide if want to pay that price to find out what might be wrong with the machine. My experience showed that the insurer didn't think my machine was worth repairing. The problem with your machine might be able to be fixed. I paid the cost of an extended warranty so that might be a similar cost for a service call. You need to think about the inconvenience of not having a washing machine and whether it's better just to cut your losses and get a new machine. If you read other reviews this model doesn't have seem to be a durable machine.

arnold.manalac.33
arnold.manalac.33

Hi

I got a electrolux ewf1481, had it around 5 years now, I'm having an error message about "unstable mains supply". I tried to look it up on the net, how to fix it..but to no avail.

Please help

Regards

Arnold

Electrolux
Electrolux   DM   

Hi Arnold, Michaels from Electrolux here. Electrolux will be able to assist you with this query. Can you please email me your contact details at customercare@electrolux.com.au attention Michaels? We look forward to hearing from you soon.

Thanks

Michaels

Beth
Beth  

Hi we have been struggling with this same problem for months and when we have spoken to washing repair people, they have never heard of it. The machine also starts and then turns off sometimes soon after starting, sometime quite a while after. Not sure if the two problems relate to each other but there is no way we want to pay for a service person at $99 just to come and then $22 for every 15 minutes after that,for them to say that they don' have a clue DoEs anyone have an answer?

Deanna
Deanna

I have a four year old Electrolux Time Manager and each time I do a load of washing the dispenser drawer is full of water at the end of the wash. This requires the drawer to be removed and the water drained off before each new load of washing. What is going on?

Electrolux
Electrolux   DM   

Hi Deanna, Sally from Electrolux here. Electrolux will be able to assist you with this query. Can you please email me your contact details at customercare@electrolux.com.au attention Sally? We look forward to hearing from you soon.

Thanks

Sally

PATRICIA O KELLY
PATRICIA O KELLY

Ive got an electrolux washer and today it wont wash its saying on the screen e40 can any body help me to fix the problem it an ewn 14780 w machine?

Electrolux
Electrolux   DM   

Hi Patricia An E40 error means the door is not closed properly or the door switch has failed. You can try and close the door firmly. If the error is still occuring then you will need to contact Electrolux on 13 13 49 to organize a service for the appliance.

Thank you

Get an answer from our members and Electrolux representatives

ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.