Sharp ESV80HA Questions & Answers
VerifiedMPN: ESV80HA
I have an esv80ha front loader washing machine that needs a new tub gasket/seal but everywhere says they are no longer available. Is there any product equivalent to this part i can buy
Does anybody know how to replace the pump in a sharp front loader washing machine ESV80HA ?
What is the highest number for a fast spin cycle
Hey Gunya, I just checked mine, all spin cycles take 20 minutes to complete, with 1400rpm being the highest spin cycle.
Hi anyone know where I can get a drain hose from or item number, thanks
My sharp esv80ha washing machine wont start has a e01 message on the screen?
Mine comes up with that sometimes as well mate, it's means the door isn't closed properly, usually just have to give it a slight push and off it goes.
Hope this helps Janine.
Does the filter have a small net bag that catches the lint or not at all.asv80 ha model Lyn
No, it never came with one. I find that the lint gets wrapped around the filter plug in mine and I just rinse it off.
Hope that helps mate.
Can I spin dry only
You can John.
The spin setting is 180 degrees from the stop setting which is at the top of the setting dial, so directly below. The symbol looks similar to the@ symbol mate.
Hope this helps.
Thank you very much Mike. I'm giving that a run now
Thats worked thanks Mike
hi my machine has no display on digital screen
Dear Jo, we encourage you to our contact Customer Care either via email at ccare@sharp.net.au, or by phone on 1300 135 022 Our team will assist in achieving a resolution for you.
We have A Sharp ESV80HA machine. Is it possible to just do a spin cycle. I did put a jumper in to spin dry only after hand washing. I then selected the spin icon at the bottom of the dial, the machine showed 20 mins for some reason so I walked away. When I came back the jumper was nearly as wet as when it went in. The spin RPMs only showed 600. Is it possible to increase the speed and reduce the time?
Hi Rob, Thank you for your time in providing feedback. We encourage you to contact our Customer Care team either via email at ccare@sharp.net.au, or by phone on 1300 135 022, referencing this feedback so that our team can troubleshoot accordingly and assist in achieving a resolution for you.
Just bought second hand but didn’t show anything on the display screen when the machine is on. Tried pressing all buttons but no signs of activation. Can anyone help? Thanks
Hi Troy,
Thank you for contacting us. If you could please send your contact details to ccare@sharp.net.au, our customer care team will be able to assist and guide you accordingly.
Kind regards,
Sharp Australia
Hi
When my washing machine fills with hot water the pump is making a very loud noise now
Never did that when I first bought it
Can you tell me what’s wrong please?
Thank Chrissy
Hi Chrissy, We would like to investigate further details about this matter. If you could please send your contact details to ccare@sharp.net.au, referencing this CRN - 529974, a member of our team can assist and work towards achieving a satisfactory resolution for you.
Kind Regards,
Sharp Australia
Hi there, can you advise how I clean the filter for this washing machine please? Cheers. Carrie
Hi Carrie, Thank you for your question. We encourage you to contact our Customer Care team either via email at ccare@sharp.net.au, or by phone on 1300 135 022, referencing this question so that a member of our team can troubleshoot accordingly and assist in achieving a resolution for you.
Kind regards,
Sharp Australia
Great machine never a problem until now.
Machine has stopped and reads 3 minute error on display. Turned machine off cannot open door.
Is this an easy fix?
Thanks
Hi, I had a similar issue and it turned out to be the pump which need to be replaced. Give the service people a call if it's still with the 2yr warranty period. If the door won't open and there is water in the machine, turn machine off at the plug and drain the water via the drain at the bottom right hand side of the machine. Once you do this the door will probably open and you can get the clothes out. Hope this helps, but give the Sharp Service Team a call anyway.
Thanks Gerry Over 4 yrs old so no warranty. Water in the barrel but was able to open the door after turning on again. The machine sounds like it wants to restart but now stops at 1 I will call the customer service and see what they suggest the machine stops at 10 on the 12 minute cycle.
I had this, and a hair pin was in the pump / filter. Once cleaned and removed it worked fine. If pump has been checked and filter it could be the electrics have failed in the screen display and need to be replaced which can be fixed.
Hi Sharon
Kudos to you and thankyou
Yes it was a foreign object in the filter. Once removed not a problem.
Have a great weekend.
Hi David,
Are you still having issues with the washing machine? Please send your contact details to ccare@sharp.net.au, or contact us on 1300 135 022. Our customer care team will assist you accordingly.
Kind regards,
Sharp Australia
Bought this machine from Masters 1'5 - 2 years ago. Works well but has become noisy when spinning. Very noisy. Cannot hear the television noisy. I am sure I am not the first person to have this problem. What is it and wheredo I get the parts to fix it?
Hi Tony, We appreciate the feedback and would like to assist you. Could you please email your contact details to ccare@sharp.net.au, referencing this CRN 509878? Our customer care team will contact you to assist accordingly.
Kind regards,
Sharp Australia
I bought this machine roughly a year ago. Recently when it finished washing there was always half load of water left in the machine! I had to try the clothes manually which was annoying. Any ideas how to get it fixed? I couldn't find the receipt anymore.
Where did you bought this machine from? Go and visit the store they should be able to print a duplicate receipt for you.
You have to ring the sharp customer care line its very annoying and the service is rubbish but best of luck
Thanks Jan I already rang and they said I need to provide the receipt. Can't believe all the trouble! After reading all the comments here, so regret I bought it! I think I'll tell all my friends to avoid this brand from now.
Hi Corinne, Thank you for contacting us. We have spoken to our customer care team and was advised that they are able to assist. Could you please email your contact details to ccare@sharp.net.au, referencing this CRN 507683, a member of our team can assist and work towards achieving a satisfactory resolution for you.
Kind Regards,
Sharp Australia
my machine isnt heating up anymore, any ideas why? its about 2 years old and I can find the receipt. thankyou
Hi Mrsajl, Thank you for your question. We encourage you to contact Customer Care either via email at ccare@sharp.net.au, or by phone on 1300 135 022, referencing this question with your CRN 506447 so that a member of our team can troubleshoot accordingly and assist in achieving a resolution for you.
Kind Regards,
Sharp Australia
Have had machine for around a year and am very happy with it. Over the last 2 weeks, the fabric softener compartment is full with water at the end of each cycle which spills when I open the drawer to put the powder in for the next load. (I haven't used any softener during this time but have for around 1 in 10 loads in the past). I physically removed the water once but it refilled the next wash. What do I need to do to address this as I can now no longer put in fabric softener if I want to due to the compartment being full of water.
Hi KBS,
Thank you for your question. If you could please send us your contact details through to ccare@sharp.net.au, mentioning this CRN - 500121, a member of our team will assist you accordingly.
Kind regards,
Sharp Australia
Did you ever get an answer to this? I am having the same issue
From memory I had to clean out the siphon plug. See page 39 of the user manual. external link
It not washing and rinse...but can spin..it hv red light that showing paip sign..may I know what the problem is?
Hi Krishnan, Thank you for your question. We encourage you to contact Customer Care either via email at ccare@sharp.net.au, or by phone on 1300 135 022, referencing this question with your CRN 497623, so that a member of our team can troubleshoot accordingly and assist in achieving a resolution for you.
Kind Regards,
Sharp Australia
having trouble with my Sharp ESV80HA washer as it is saying the door is always open.
Can anyone help please?
Cheers
Hi Scott, Thank you for your question. We encourage you to contact Customer Care either via email at ccare@sharp.net.au, or by phone on 1300 135 022, referencing this question, so that a member of our team can troubleshoot accordingly and assist in achieving a resolution for you.
Kind Regards,
Sharp Australia
It got only one water inlet .how do I connect hot and cold water into it ?
Refer to manual. Machine has only one cold inlet.
hi
connect the hose to cold water only.
it will hjeat up the water according to the set tempreture .
it has an inbuilt heating system
thanks
Hi Linh, The ESV80HA washing machine is supplied with a single (cold) water inlet, however please note there is an integrated heating element on the cold water inlet which lets you choose a washing temperature between 30°C - 95°C as well as a cold wash setting.
Kind Regards,
Sharp Australia
Get an answer from our members and Sharp representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.