Dulux Metalshield Epoxy Enamel Questions & Answers
Verified
I know you say metalshield does not require a clear coat - but even so, can I spray an enamel clear coat over it ?
I wanted to check whether MetalShield Epoxy Enamel is really an epoxy, in that it contains an epoxide group, or if the word "epoxy" means something else. I'm going to be using Metalshield Epoxy Enamel to paint a metal surface. That surface will be, in places, coated in 2 part epoxy. Knowing whether Metalshield Epoxy Enamel is a real epoxy will determine when I can apply the 2 part epoxy.
The word epoxy is very misleading on behalf of Dulux, the term epoxy only represents the solids inside the paint, the binder is 1k, please find my review, paint will not dry, can't be handled for over a week and still does not achieve anything close to a full cure
Hi Martin, Thank you for your question, our Technical Team will be best to assist you and offer further advice for your project. Please contact us on 13 25 25 (option 2). Regards, Kaaren and the Dulux Team
Thanks Kaaren, would be great if they shared the answer here so that others can see it too :)
Hi I have and old box trailer that I wire brushed and used rust buster to remove the surface rust I then applied 1 coat of metal shield it has dried in some areas and is still tacky in others after 48 hrs is there a way to make it all cure or do I need to start again?
Hi Shaun, We're sorry to hear that your experience with our Dulux Metalshield Epoxy Enamel hasn't been so positive, we would like to further assist you if you can please contact our Help & Advice team on 132525 option 2. Please quote Your Ticket Number 969031. We look forward to hearing from you. Kaaren – The Dulux Team
I have treated the underneath of a vehicle for rust with Ranex Rust Buster. After drying I high pressure washed it all but after the wahing dried there is still a white residue from the Ranex in hard to get places. Can I reasonably successfully spray paint over this with Dulux Metal Shield Epoxy Enamel?
The white powder is the residue from the treatment process and should be thin and well bonded to the surface Metal Shield can be applied over this and will bond to the metal surface. Metal Shield cannot be applied over heavy deposits or thick residue, greasy surfaces or wet seams as it cannot bond to the metal surfaces.
Hi Mikles, Thank you for reaching out to Dulux via Product Review. We'd love to help with your query, but in order to do so, we need to ask you a few more questions. Please give us a call at 13 25 25, and our technical consultants can help you with this one.
We hope to hear from you soon!
Thanks, Minidu at Dulux
What's a suitable primer for top-coating SS304 with Metalshield Epoxy Enamel that also has a temperature rating of ~120°C?
"HEAT RESISTANCE Up to 65°C dry heat" would make Metalshield® Etch Primer unsuitable for many outdoor applications? So what do I use?
Hi Xavier, Thank you for reaching out to Dulux via Product Review. We'd love to help with your query, but in order to do so, we need to ask you a few more questions. Please give us a call at 13 25 25, and our technical consultants can help you with this one.
We hope to hear from you soon!
Thanks, Minidu at Dulux
what are is covered by 1 Metalshield Epoxy Enamel Gloss Paint Blue Base.
1lt will cover approx 2sqm if applied correctly using 2 coats for durability
Hi Neal, Thank you for reaching out to Dulux via Product Review. We'd love to help with your query, but in order to do so, we need to ask you a few more questions. Please give us a call at 13 25 25, and our technical consultants can help you with this one.
We hope to hear from you soon!
Thanks, Minidu at Dulux
Can metalshield epoxy enamel gloss be rubbed back(wet sanded) then cut and polished? I’m repairing the paint work on my camper trailer.
YES , but ensure the paint has fully cured, so I would paint it and allow a full week of cure time before wet sanding. The spray cans produce a finish that really is OEM gloss and probably don’t need polishing if applied lightly in multiple coats to build your finish.
Hello BGS,
Thank you for your question!
This is a bit of a complex project, best to reach out to our technical team on 13 25 25 Option 2 for advice.
All the best with the project! Sarah at Dulux
Wanting to paint steel tray. Has some heavy rust in places which has been removed by a needle gun. going to etch prime, and top coat with metal shield, should I add a hardener?
Neutralise the remaining rust first with a tannin based rust control spray, prime if you wish, then use the metal shield from the can. Allow it to flow onto the surface and do not over brush or roll the paint. It will self level and does not need a hardener as epoxy based paints harden very well over a 48 hr period but don’t load the tray for 72 hours
Hello, Thanks for your message! We'd love to help with your query, but in order to do so, we need to ask you a few more questions. Please call our Dulux team on 13 25 25 (option 2) at your earliest convenience, so we can begin investigations for you. Your Dulux rep can also assist with this. We look forward to hearing from you soon. Sarah at Dulux
Can I applymetalshoeld epoxy enamel straight over a prepared oil based enamel?
NO- that would be a mistake Oil based paints have a certain level of adhesion and durability but the epoxy enamel has much higher adhesion potential and durability as the epoxy formulation will cure and harden ( and shrink) whereas the enamel paints simply dry by air exposure and then loose their oil content to heat and sun exposure to fail by breaking down over time. Sand back the enamel paint heavily before applying the metal shield paint.
Hi Ron,
Thank you for your question!
We will need a little more information about your project in order to provide the best application, preparation and product advice. Please call our team on 13 25 25 Option 2 for advice.
Sarah at Dulux
I am wanting to paint bronze olive aluminium window frames white but concerned if, being oil based this product will yellow over time. If so is there another product you recommend? TIA
Hi guys, how long would you think for climates in the sub 10 Celsius temperatures? I painted on the friday, and still sticky on the monday evening. I have an oil heater in the rooms to try add heat
How long should you wait after using the etch primer spray can to apply the epoxy enamel paint (spray can as well), there seem to be a variety of answers on here?
I applied the etch primer, it dries pretty quickly, so then only about 4-5 minutes after, before it flash dried then applied the top coat. This allowed the top coat to grab into the slightly damp primer. This is to avoid totally separate dry coats that can separate & flake from sunlight etc.
Hi Temp Name, For Dulux Etch Primer Spray, recoat time is 1 hour (for 25°C at 50% relative humidity) but please allow longer for cooler or more humid conditions. If you need more help along the way, you can also reach out to us on 13 25 25 (option 2) to get you on track!
- Minidu at Dulux
Hi. Just would like to know if I can spray metal shield of epoxy through a graco hvlp and what needle is recommended. The surface i need to spray is powder coated and then finished with an epoxy gloss, clear coating. All I need to do is change the colour.
Hi Radenko, Dulux Metalshield Epoxy Enamel can indeed be sprayed! Head to our website below where you can check out the Product Datasheet for our application guide! As for needles, you may need to contact your spray gun manufacturer for their recommendation. external link
If there's anything else we can help with, please feel free to call our technical team on 13 25 25 (option 2). Happy Painting!
Hi. I've cleaned, primed and painted steel bars with metalshield epoxy enamel. The finished surface has to be tolerant to constant wiping with mild detergent wipes. What clear coat can I finish with and will it help with durability?
Hi Phil, Dulux Metalshield Epoxy Enamel is a top-coat design, and we do not recommend applying clear coats to this paint. Additional coats of the epoxy will improve durability, and any clear coats may react and cause issues down the track. If you have any further questions, please feel free to reach out to us on 13 25 25 and we'll help you with your project! - Dulux Australia
Hi dulux team, can i spray metal shield new homes doors and frames, like metal shield undercoad,,?
Can I apply concept 1k premier clear over metalshield epoxy?
Hi HMG, We would not recommend this, as the different paint types are not compatible, but if you would like additional protection for Metalshield Epoxy, give us a call on 13 25 25 and we'll be able to help you with your project! Cheers, Dulux Australia
I'm Nunzio I been spray metalshield epoxy enamel gloss for the second coat do have sanding
Hi Nunzio, Great news, sanding is not required between coats, unless there is a roughness after the first coat (for example if the substrate had quite a bit of texture). For more tips, help and advice, please feel free to call us on 13 25 25 (option 2) and we'll be able to help with your project! Thanks, Dulux Australia
Hi Wondering if you can help? I want to paint zincalume c purlings that are outside and have been there for a few years unpainted and I'm confused as to whether they require undercoating/priming proir to using dulux metalshield epoxy (ironstone) as the finished result Regards Nick
Hi Nick! For coating zincalume, you will need to use an etch primer. Please clean surface with sugar soap and a Scotch-Brite Pad to remove any grease, oils and dirt, then rinse with clean water. Once dry, apply 1 coat of Metalshield RFU Etch Primer. If you'd like any further help with your project, please feel free to contact us on 13 25 25 (option 2) and we'd be more than happy to help! Good luck and happy painting! - Lucy at Dulux
Thanks Lucy for your clear answer to my question Regards Nick P
Can you use a paint additive such as Floetrol to Dulux Metalshield paint to increase drying time and workability. I have tried using Metal Shield (thinned with Dulux Brush Thinner) with Industrial Mini Rollers but they tend to come apart quite quickly.
I bought 1L of Duluth metalshield epoxy enamel tinted bright yellow in May 2022. I opened it yesterday and it had a brown gelatinous layer on top that dispersed into small granules on stirring. It’s unusable. Can it be restored to usable and if so how? or do I need to buy a new one.
Hi Gordon, This sounds very strange, and we'd love to look into this. Please give us a call on 13 25 25 (option 2) so we can find out some more information. We may ask for some photos just so we can understand what is happening, but we'll get you back on track with your painting project! We hope to hear from you soon! Cheers, Dulux Australia
Get an answer from our members and Dulux representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.