Hi, I need to replace the ect temp sensor in my 2013 great wall diesel x200. I have the replacement part already, I'm just having trouble locating it.
Having just salvaged my Great Wall 2013 X200 ignition key from the washing machine I need to open it to try and save the remote action. How can I open it?
Is it a fuss gone when you can not see light on the dashboard..if so what number fuss is it
How do you unlock the rear center seat belt when it's stuck with seat foward
our 2012 great wall x2000 appears to have a vibrate over 90kms per hour. otherwise drives well.
Position lamp not working. How to replace bulb or light?
Can I fit a 2020 steed diesel engine into a 2013 X200 ?
I've recently out new ingnition in my great wall with new key ,now the remote won't lock or open my doors
My daughter has a 2013 Great Wall X200 with wiper problems we believe to be BCM related. We are in Wonthaggi Vic. Anybody know a reliable auto elec or mechanic they can recommend to repair/ replace and recode to the vehicle please ?
How do I remove the front park light globe from a great wall 2.0 litre ute
How to unlock trunk door. Where is lock access hole.
Great Wall X200 Tdi 2013 CC6461KY power management relay switch 3735020-K00-C2 is hot when the vehicle ignition is off keys are out of the ignition. Also when the key is in the ignition turned on to accessory using the internal right hand side door unlock button the rear left hand window winds down opening it. The vehicle does not remain locked.
I have a taillight not working
Which one? If it's one of the upper LED lights, check your front park light globes, one of them will be blown. If it's one of the lower lights, you'll need to replace the globe, to do that, open the tailgate, remove the two 10mm bolts that hold the tail-light in and remove the tail-light. Then change the bulb and reverse the procedure.
Hey. Just picked up a 2012 x200. Have no low beam, but all other lights work, also no locking/unlocking via remote (fresh battery in the remote). Any clues?
Having the same problem with my low beam, doing my head in.
Worked out the low beam issue. Turns out 1 blown bulb and the other stops working. Like old school Christmas lights, one goes they all stop, luckily there's only 2 bulbs for this. Hope this helps
driving as normal the big puff off black smoke came out of the exhaust and car stopped but motor turns over but wont start ive checked timing belt and timing makes and it has not slipped but still car will crank but wont fire
Compression timing issues
Firstly I had no dash light. Now suddenly I have no speedo/ tach/ fuel/temp/clock/pre heat light. All main lights and indicators and hazards etc are working, car starts and runs ?
how do I replace reversing light globe
I have similar issue after disconnecting all tail lights. Is it just that the reverse light is disconnected? (according to Leo v.)
Hi. My left front wheel warning light came on in mirror display. Looks like tyre pressure issue. Checked pressure and it's fine. Can I reset or is there another issue? Thanks
The battery is going flat in the tyre pressure sensor, replace the tyre pressure sensor. (The batteries are not replaceable.)
Is the sensor on the valve?
Usually a faulty reading check pressure all tyres . Mine did this after a tyre repair can be re calibrated but are over sensitive also.
Thanks. Do you have the recalibration procedure?
My mechanic did also Goodyear tyres.
How much coolant does this require
Do you have a user manual ? If not see recommended on your radiator size etc google.
Hi I have 3 fuse boxes on our X200 Great Wall and I can not find the indicator fuse because the dash gauges and lights don't work. I have used a multi meter on all the fuses and they are all ok thanks peter
Markings are on most lids etc or in the user Manual my auto electrician sorted them when an issue .a good one
Very few issues in that areas
Check the front park lights, one of them will be blown. Yes, it's strange, but it's a GWM thing.
Apparently the 30 amp fuse was a faulty one straight from the manufacturer in that 2012 up to 201015
Evelyn B. can you tell me where the third fuse box is located. I have one by drivers side dash and one under the hood by the battery but cant see a third fuse box anywhere. Any info appreciated
How do I fix flashing dash lights for a great wall 2013 tdi they are AWD seletion, traction control can you let me know the code please
Fussy lights turned mine off back up vehicle go go forward resets self usually when I have been on 1km of dirt track
devidascarter that doesn't work mate and I live on a property with loads of dirt tracks and I swear there is a simple code you do with your ignition, blinkers,horn etc...
The traction control light is flashing because of the 4wd issue. You'll need to replace the 4wd shift motor on the side of the transfer case, they're between $80 and $100 on ebay. It's a 10 minute job that anyone handy with tools can do.
Get an answer from our members
Extra Information
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.