Oricom UHF2100 / UHF2180 Questions & Answers
Verified
I bought oricome uhf2180 years ago. After being packed away for 2 years they no longer hold charge. I assume need new batteries. Will these batteries work and recharge by the oricom charger?
ENERGIZER RECHARGE® EXTREME AAA BATTERIES Save money with the world’s first rechargeable AAA battery made with 4% recycled batteries*. Energizer Recharge® allows you to cut down on the number of disposed batteries while enjoying long-lasting power.
Features
Capacity: 800mAh 4 AAA rechargeable batteries replace up to 1,400 alkaline batteries Up to 5 years** battery life Lasts up to 5x longer*** 100’s and 100’s of charges Holds charge up to 1 Year†
Hi there, thanks for the message. We would like to assist so please give our locally based Oricom Support a call on 02 4574 8888 Mon-Fri 8am-6pm AEDT, as the team will be able to assist. All the best, Oricom.
Hi. I have a UHF2180. I seem to have everything figure out but I got 1 problem. The mic seems to be not loud enough can barely hear anything even tho I have turned the power/vol thingy all the way up. Any way I can put the volume up more or any thing I have to reset to fix this problem
Hi there, we would love to help you with this. Please give our locally based Oricom Support a call on 02 4574 8888 Mon-Fri 8am-6pm AEST, as the team will be able to assist you with this. All the best, Oricom.
Hi guys I bought a pair of 2180 radios from market place one of the speakers is not working is there some way to fix this or will I have to send it in for repair
Hi Noel, please give our locally based Oricom Support a call on 02 4574 8888 Mon-Fri 8am-6pm AEST, as the team will be able to assist. All the best, Oricom.
Hi I have a pair of PMR 2000 Handhelds. I cannot turn the volume up or down on either unit. When I push the (looks like a speaker) button it goes through all the channels. When push it again, it reverts back to ch 12. Any help would be appreciated. Mal
Hi there, thanks for the message. We would love to discuss and assist you with this. Please give our locally based Oricom Support a call on 02 4574 8888 Mon-Fri 8am-6pm AEDT, as the team will be able to provide some guidance. All the best, oricom.
Hi guys - I have 2x2190's. One of the units constantly displays the graphic/symbol that says DISPLAYED WHEN THE CALL SIGNAL IS ON. There is no mention of this anywhere in the User Guide - can you tell me what it does and how to disable/enable it? Cheers Roger
Hi Roger, thanks for the message. Could you please give our locally based Oricom Support a call on 02 4574 8888 Mon-Fri 8am-6pm AEST, as the team will be able to assist. All the best, Oricom.
how do you unlock this
Hi there, thanks for the message. The Key lock function is outlined on page 19 of the User Guide, as below: The Key Lock feature allows the user to disable the UP, DOWN and MENU buttons so that the UHF2100 settings could not be changed accidentally. a. To activate the key Lock feature, press and hold the MENU button until key lock icon appears on the LCD Screen. b. To deactivate the key Lock feature, press and hold the MENU button until key lock icon disappears on the LCD Screen. Note: The PTT, and CALL buttons will remain functional even if the Key Lock feature is activated.
All the best, Oricom.
Hi, I am unable to turn off the Monitor function on one handset using the instructions from the User Manual below. How can I factory reset?
Les
Monitor You can use the Monitor feature to check for weak signals on the current channel. a. Press and hold the MENU and DOWN buttons at the same time. “ ” icon will be displayed on the LCD screen. Your radio will pick up signals on the current channel, including background noise. b. Press the MENU button to stop the channel monitoring.
Hi Les, thanks for the message. Oricom Support have offered the following advice: 1) Turn the radio off 2) Press and hold menu button whilst turning radio on. 3) Radio should reset to CH12 for UHF2180, UHF2100 is either CH1 or CH12.
All the best, Oricom.
Hi i brought the value pack uhf radio+the handheld radio the handheld radio wont turn on or anything and has been on the charger for 2days now. Any ideas?
Not sure make sure the batteries are in correctly and there is no clear plastic strip between the batteries and the contacts. If STILL no joy call Oricom help line .They were very helpfull with my problem.
Hi there, thanks for the message. For this one, please give our locally based Oricom Support team a call on 1300 889 785 Mon-Fri 8am-6pm AEST, as the team will be able to assist in troubleshooting the issue with you and will work to provide you with a solution. All the best, Oricom.
Hi, my 2180 models turn off when I press the call or transmit buttons, batteries full charge, anyone have a fix for this? have done a factory reset, no change
Good Morning Neil, we suggest you contact our support team and they will be able to troubleshoot with you over the phone. Call 1300 889 785 or (02) 4574 8888 Mon - Frid 8am - 6pm EST. Thanks Oricom UHF CB
I had the same problem with one of my units was told by Oricom that it was the batteries which turned out to be correct. Try ordinary batteries to test it out . Hope this helps you.
I purchased the handheld UHF2180 several years ago at the Perth show but have only just actually charged it up, I am about to head up to Queensland with my van and was wondering if the units are suitable for using on the road, for semis other caravans comms etc
Good Morning, The UHF2180 is a 2watt handheld UHF CB radio. These units will be ok for use around the campsite when spotting and short distance communication between vehicles. Please give our support team a call on 1300 889 785 or (02) 4574 8888 if you require further information. Oricom UHF CB.
They work ok "line of sight".
I have a Handheld UHF 2180.
The RX light is on continuously and it has a constant background squelch. Tried the factory reset with no luck and it is frustrating as the pair radio works perfectly!
Can you help?
Neill
Good Morning Neil, sorry to hear your radio is not working. Unfortunately, it sounds like the unit is faulty. This product is backed by a 3year warranty, if you have a copy of your purchase receipt please contact our support team on 1300 889 785. All the best Oricom UHF CB
I am speaking through one of the Walkie Talkies and I can hear myself on the other, BUT.... when I talk on the other Walkie Talkie I cannot hear myself through the other?? WIERD. Can I have some help please?
Hi Penelope, thanks for the message. Sorry to hear of the issue you are experiencing and we would love the opportunity to assist in solving this issue. If you could please call Oricom Customer Support on 1300 889 785 Mon-Fri 8am-6pm AEST, they will be able to troubleshoot the issue and work towards a solution. All the best, Oricom.
New 2190 , one works fine, One has been replaced but same problem. Will not power up unless I remove batteries and replace them. Then will turn on off for a while. If left off for a minutes have to remove batteries and replace to get going. Have use different batteries so that is not the problem. Any ideas?
thanks bgm
Hi there, thanks for the message. Sorry to hear of the issue you are experiencing with your UHF2190, and for this one we recommend that you please call our dedicated Customer Support Team on 1300 889 785 Mon-Fri 8am-6pm AEST, as they will be able to troubleshoot this issue with you and advise. Thanks and all the best, Oricom.
Exactly the same problem as mine. When I googled it I found a few reviews with the same problem. I took mine back and got a full refund. Consumer law is on your side. Go for your $ back and buy a different product. If Oricom were being right about it they would have taken them off the shelves by now.
We have a handheld 2180 and there is a red light coming on. This makes the mic open. Can anyone help pls?
Hi Raine, thanks for getting in touch. Sorry to hear of the issue you are having with your UHF2180. For this issue it is best that you get in contact with our dedicated Customer Support Team on 1300 889 785, as they will be able to troubleshoot the issue with you over the phone and work towards a solution with you. Thanks and all the best, Oricom.
Hi Raine, Customer Support have advised the following: It sounds like you have VOX on, so in order to change this: Do factory reset and see if the problem is fixed. Press and hold “call” button (not PTT) whilst turning unit on
If reset is successful radio should default to channel 12.
Hope that helps. If the problem continues, please call our dedicated Customer Support on 1300 889 785 to help troubleshoot the issue. Thanks and all the best, Oricom.
Hi Is there any protective covers for the UHF 2190s?
Hi Dave, Sorry but we don't have any protective covers to suit the UHF2180. Check online you should be able to pick up something generic that would fit. All the best Oricom UHF CB
Is there a car charger available for UHF2190. If so where can I get one or if not, why not?
Hi Davo, We sell the 12volt charger with two speaker mics: external link Cheers, Oricom UHF CB
What has replaced your Oricom 2180?
Why did you discontinue? Do you have anything of similar std at a similar price ?
Where do I buy from? I live 35 Ks out of Whangarei.
Mal Jarvis 0211530535
Hi Mal, We are continually working to improve our products as technology advances. The UHF2180 have been replaced by the UHF2190 or you may be able to find a similar model UHF2195 in some retailers. This model is essentially the same as the UHF2180 with 2 watt power. It comes with an FM Radio and Torch which some of our customers really like. Check your local Repco or SuperCheap store for stock. Cheers, Oricom UHF CB
I bought a in car unit, I have wired it up but waiting for an antenna to arrive that I have ordered, I turned the unit on and can receive transmission but when I push the mike button nothing lights up as in the tx symbol. Is this because of no antenna or is there something wrong?
Hi Joe, Thanks for your question regarding your installation. It is likely that the issue you are experiencing is due to the fact you have no antenna attached. Please refer to the the Installation Instructions and Warnings in your user manual when installing your radio in your vehicle, and check that during installation you do not damage any wiring or vehicle components that may be hidden around the mounting position.
For optimum performance your radio needs to be installed correctly. If you are unsure about how to install your radio, we suggest you have your radio professionally installed by a UHF specialist or Auto electrician. When installing the radio, avoid mounting it close to heaters or air conditioners. Importantly Never press the PTT or CALL button before connecting the antenna to the radio.
Antenna information
The antenna (not supplied) is of critical importance, to maximize your output power and receiver sensitivity. A poorly installed, inferior
quality antenna or one not designed for the correct frequency band will give poor performance. You should only purchase an antenna
designed for the 477MHz frequency band.
Antenna installation
1. Connect the antenna to the rear antenna socket using a PL259 coaxial connector (not supplied).
2. To obtain maximum performance from the radio, select a high quality antenna and mount it in a good location.
Never press the PTT or CALL button before connecting the antenna to the radio.
If you need any further advice or assistance, please contact our Customer Support Team on 1300 889 785.
Best regards,
Oricom UHF CB Radios
Hi Joe, Do not attempt to transmit without the antenna attached mate, could damage your set. Best bet would be to check it out once anteena arrives. Sorry for the tardy reply. Cheers Steve
I have UHF2180. Can receive and hear clearly but can't transmit. Is it just a setting?
Being a 2W unit you are only able to transmit (they claim) up to 10km "line of sight". Therefore you won't be able to transmit around corners or over buildings or terrain. My advice is to take it back to whoever you bought it from or speak to Oricom as I haven't had any issues with transmitting or receiving signals within close proximity. They are a pretty basic unit and to date I haven't had any issues with mine.
Hi There Mark, The first tip would be to perform a factory reset on your unit, To do this turn your radio off. Once the unit is off, Push and hold down the (M) Menu button while turning the unit on. Once the unit is on release the (M) Menu button, test the unit again, if this does not resolve the issue you are experiencing please give us a call on 02 4574 8888 or 1300 889 785 and we will troubleshoot with you further.
hi budy just wondering what ended happening with that issue as im currently suffering from the same thing its kinda enoying we can hear but no one can hear us
I have just got my UHF2180 and set them up and pluged in to charge for the first time, On the desk top charger the red led for both units have stayed on for 3 days, do they go green when fully charged ??? George
Hi George, The red light indicates the charger is engaged and working. To check if the battery is full, turn the radio on and check the battery level icon (see page 10 of the user guide). If you need any assistance, give our Customer Support Team a call on 1300 889 785. We hope you enjoy your radios. Cheers Oricom UHF CB
No, they stay red
Get an answer from our members and Oricom representatives
ProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.